Chemosensors for the marine toxin saxitoxin

Eleven anthracylmethyl crown ethers have been synthesized and evaluated as fluorescence sensors for the marine toxin saxitoxin. Fluorescence enhancement data are consistent with a 1:1 binding complex for all crowns. The binding constants are in the range of 10(4) M(-)(1) in ammonium phosphate buffer (pH 7.1) in 80% ethanol solvent. Selectivity for sensing saxitoxin versus several organic analytes has been demonstrated for the first time. Possible modes of binding are presented, and relevance to saxitoxin monitoring programs are discussed.     

Bead injection for surface enhanced Raman spectroscopy: automated on-line monitoring of substrate generation and application in quantitative analysis

The technique of bead injection has been adapted for surface enhanced Raman scattering (SERS) to substantially improve precision, long term stability and sensitivity of SERS detection in analytical chemistry. For this purpose a fully automated flow system comprising a dedicated flow-cell has been developed and tested. With the developed flow-cell, which contains two inlet and two outlet channels, it is possible to retain, perfuse and discharge minute amounts of polymer beads while monitoring all steps by Raman spectroscopy. First, beads carrying cation exchanger moieties were retained in the flow-cell and subsequently perfused with a silver nitrate and a hydroxylamine solution using one inlet of the flow cell. By this sequence homogeneous SERS active silver layers were formed on the beads. The uniformity of the achieved silver layer was studied by secondary electron microscopy. For measurement, the analyte was then introduced from the second inlet channel such that the interaction between the activated SERS beads and analyte occurred in close proximity and within the focus of the laser excitation beam. Due to the complete computer control of all experimental steps, including bead entrapment, SERS layer generation, sample introduction and final bead removal, highly reproducible conditions for SERS were achieved. The method was developed using 9-aminoacridine as a test molecule. Quantitative studies were carried out for 9-aminoacridine and acridine showing linear calibrations from 1-100 nmol l(-1) and 50-1,000 nmol l(-1), respectively, using a sample volume of 200 microl each. Typical relative standard deviations were 4.7% for 9-aminoacrine and 5.8% for acridine.     

Influence of drying procedure on the mesoporosity and surface fractal dimensions of silica xerogels prepared with different agitation methods

Silica xerogels were prepared by thermal drying wet gels in an electric oven (70 degrees C) after certain duration of ambient drying, and the relevant effect is investigated on the mesopore structures and surface fractal dimensions of the resultant xerogels. The silica gels were derived from a hydrochloric acid-catalyzed TEOS (tetraethylorthaosilicate) system, and both magnetic stirring and ultrasonic vibration were adopted during sol preparation. The percentage mesoporosity and surface fractal dimensions are evaluated using image analysis methods, based on FE-SEM (field emission gun-scanning electron microscopy) images. The results show that the mesoporosity of the resultant xerogels decreases with the duration of ambient drying for samples prepared using magnetic stirring and low-intensity ultrasonic vibration, while samples subjected to high-intensity ultrasound show a somewhat reverse trend. Samples prepared with magnetic stirring have almost constant surface fractal dimensions (nearly 3), irrespective of the ambient drying before thermal drying. The surface fractal dimensions of samples prepared using ultrasound increase with the duration of ambient drying.     

Synthesis,crystal structure and magnetic properties of [RBzPy] [Fe(mnt)2] complexes ([RBzPy]+ = 1-(4′-R-benzyl)pyridinium,R = NO2 and CL; mnt2− = maleonitriledithiolate)

Ion-pair complexes consisting of the [Fe(mnt)₂]^– anion and [RBzPy]⁺ cations [R = NO₂ (1) or Cl (2)] have been prepared and characterized by elemental analysis and i.r. spectroscopy. The single crystal structure of (1) shows that the [Fe(mnt)₂]^– anions are dimeric, and that the coordination geometry of each Fe atom is square pyramidal. The most significant structural feature of (1) is that anions and cations form completely separate columns and – interactions occur within the cation columns. Thermal variations of _m T for the complexes indicated antiferromagnetic coupling within the dimer.     

Synthesis of pyrazine-phosphonates and -phosphine oxides from 2H-azirines or oximes

[reaction: see text] Tetrasubstituted pyrazines containing two phosphonate groups 2 in positions 2 and 5 and trisubstituted pyrazines containing a phosphonate 5 or a phosphine oxide group 7 in position 2 are obtained by thermal treatment of 2H-azirine-2-phosphonates 1 and -phosphine oxides 6. These pyrazines can also be prepared from beta-ketoxime tosylates 9 and 10 or from oxime derived from phosphine oxide 11.     

Revealing structural effects: electrochemical reactions of butanols on platinum

Spectroelectrochemical studies on the reactivity of butanol isomers on Pt electrodes in perchloric acid medium led to the observation of structural effects that result from the different arrangements of atoms in the organic molecules. The use of differential electrochemical mass spectrometry (DEMS) to detect volatile products showed that all four isomers react on the electrode, though different product yields were observed for each compound. In spite of the differences in the electrochemical behaviour of the butanol isomers, a series of general processes accounts for the results obtained. The formation of strongly adsorbed residues by a dehydration process leading to the formation of a C=C bond was proposed for all isomers. Electroreduction of the adsorbates produces C(4) and C(3) alkanes, and the latter reveal the existence of a fragmentation process. The C(4) hydrocarbons can be formed by hydrogenation of these residues and by hydrogenolysis of alcohol molecules in the bulk solution which react at the electrode with adsorbed hydrogen. On the other hand, CO(2) is formed during electrooxidation of the adsorbed species. Partial-oxidation products containing a carbonyl group were detected from 0.2 M solutions of 1-butanol, isobutyl alcohol and sec-butyl alcohol. The tertiary alcohol tert-butyl alcohol only reacts in its adsorbed state.     

Synthesis of different chiral amino gamma-butyrolactones and amino gamma-butenolides

Different transformations of chiral epoxy esters 1 afford two different amino gamma-butyrolactones 2 and 6, and amino gamma-butenolides 8, by different nucleophilic opening-closing processes. [reaction: see text]     

Mechanistic diversity covering 15 orders of magnitude in rates: cyanide exchange on [M(CN)(4)](2-) (M = Ni, Pd, and Pt)

Kinetic studies of cyanide exchange on [M(CN)(4)](2-) square-planar complexes (M = Pt, Pd, and Ni) were performed as a function of pH by (13)C NMR. The [Pt(CN)(4)](2-) complex has a purely second-order rate law, with CN(-) as acting as the nucleophile, with the following kinetic parameters: (k(2)(Pt,CN))(298) = 11 +/- 1 s(-1) mol(-1) kg, DeltaH(2) (Pt,CN) = 25.1 +/- 1 kJ mol(-1), DeltaS(2) (Pt,CN) = -142 +/- 4 J mol(-1) K(-1), and DeltaV(2) (Pt,CN) = -27 +/- 2 cm(3) mol(-1). The Pd(II) metal center has the same behavior down to pH 6. The kinetic parameters are as follows: (k(2)(Pd,CN))(298) = 82 +/- 2 s(-1) mol(-1) kg, DeltaH(2) (Pd,CN) = 23.5 +/- 1 kJ mol(-1), DeltaS(2) (Pd,CN) = -129 +/- 5 J mol(-1) K(-1), and DeltaV(2) (Pd,CN) = -22 +/- 2 cm(3) mol(-1). At low pH, the tetracyanopalladate is protonated (pK(a)(Pd(4,H)) = 3.0 +/- 0.3) to form [Pd(CN)(3)HCN](-). The rate law of the cyanide exchange on the protonated complex is also purely second order, with (k(2)(PdH,CN))(298) = (4.5 +/- 1.3) x 10(3) s(-1) mol(-1) kg. [Ni(CN)(4)](2-) is involved in various equilibrium reactions, such as the formation of [Ni(CN)(5)](3-), [Ni(CN)(3)HCN](-), and [Ni(CN)(2)(HCN)(2)] complexes. Our (13)C NMR measurements have allowed us to determine that the rate constant leading to the formation of [Ni(CN)(5)](3-) is k(2)(Ni(4),CN) = (2.3 +/- 0.1) x 10(6) s(-1) mol(-1) kg when the following activation parameters are used: DeltaH(2)() (Ni,CN) = 21.6 +/- 1 kJ mol(-1), DeltaS(2) (Ni,CN) = -51 +/- 7 J mol(-1) K(-1), and DeltaV(2) (Ni,CN) = -19 +/- 2 cm(3) mol(-1). The rate constant of the back reaction is k(-2)(Ni(4),CN) = 14 x 10(6) s(-1). The rate law pertaining to [Ni(CN)(2)(HCN)(2)] was found to be second order at pH 3.8, and the value of the rate constant is (k(2)(Ni(4,2H),CN))(298) = (63 +/- 15) x10(6) s(-1) mol(-1) kg when DeltaH(2) (Ni(4,2H),CN) = 47.3 +/- 1 kJ mol(-1), DeltaS(2) (Ni(4,2H),CN) = 63 +/- 3 J mol(-1) K(-1), and DeltaV(2) (Ni(4,2H),CN) = - 6 +/- 1 cm(3) mol(-1). The cyanide-exchange rate constant on [M(CN)(4)](2-) for Pt, Pd, and Ni increases in a 1:7:200 000 ratio. This trend is modified at low pH, and the palladium becomes 400 times more reactive than the platinum because of the formation of [Pd(CN)(3)HCN](-). For all cyanide exchanges on tetracyano complexes (A mechanism) and on their protonated forms (I/I(a) mechanisms), we have always observed a pure second-order rate law: first order for the complex and first order for CN(-). The nucleophilic attack by HCN or solvation by H(2)O is at least nine or six orders of magnitude slower, respectively than is nucleophilic attack by CN(-) for Pt(II), Pd(II), and Ni(II), respectively.     

Determination of liposoluble vitamins in cooked meals, milk and milk products by liquid chromatography

A method for the simultaneous determination of liposoluble vitamins in cooked meals was established. Saponification was performed with 50% (w/v) KOH at 80 degrees C, and ascorbic acid was added as antioxidant. The subsequent extraction was carried out with diethyl ether. This was followed by a liquid chromatographic separation on a reversed-phase C18 column with methanol-water (94:6, v/v as the mobile phase. Retinyl acetate was used as the internal standard. The analytical parameters linearity, detection limit (0.19 and 8.33 microg/100 g for retinol and alpha-tocopherol, respectively), precision of the method (RSD=5.24 and 6.99% for retinol and alpha-tocopherol, respectively) and recovery assays (95.6 and 96.5% for retinol and alpha-tocopherol, respectively) show that the method studied is useful for measuring these compounds in foods and cooked meals.     

Synthesis of 1,2,7,7a-tetrahydro-1aH-cyclopropa[b]quinoline-1a-carboxylic acid derivatives, doubly constrained ACC derivatives, by a remarkable cyclopropanation process

Reaction of N-benzoyl-1,2,3,4-tetrahydroquinoline-2-carboxylic acid with acetic anhydride resulted in 1H,3H,5H-oxazolo[3,4-a]quinolin-3-one derivative 13. Different cyclopropanation processes were applied to 13, but only diazomethane in the presence of water furnished the hitherto unknown methyl 1,2,7,7a-tetrahydro-1aH-cyclopropa[b]quinoline-1a-carboxylate 14, which can be considered as a doubly constrained 1-aminocyclopropane-1-carboxylic acid system. The mechanism of the cyclopropanation was studied in detail. The new ACC ester 14 was transformed into fused tetracyclic hydantoin derivatives, which comprised a new type of heterocyclic system.