Preparation and Characterization of a Sol-Gel Prepared Ferroelectric Sandwich Structure

A novel silicon-based PbTiO₃/Pb(Zr,Ti)O₃/PbTiO₃ (PT/PZT/PT) sandwich structure has been prepared using a sol-gel method. The annealing temperature is greatly reduced compared with those structures without PT layers. Capacitance-voltage (C-V), leakage current-voltage (I-V), polarization-field (P-E), dielectric-frequency response and polarization fatigue of the sandwich structure are examined. The relative dielectric constant, the coercive field and the remanent polarization of the PZT films are measured to be about 900, 18 kV/cm and 16 C/cm² respectively. The current density is less than 5 × 10^–9 A/cm² below 200 kV/cm. The dielectric constant of the structure remains constant at low frequency, and decreases to some degree at high frequency. The retained polarization does not change significantly after 8 × 10⁹ read/write cycles. The PZT films are proved to have very good dielectric and ferroelectric properties. The new PT/PZT/PT sandwich structure can be valuable for memory devices and other applications.     

The complete symmetrization of quantum operators: new thoughts on an old problem

The complete symmetrization with respect to x, p _x,... of the operators associated with dynamical properties can sometimes lead to results different from those obtained by the conventional quantum formalism based on the rule op (A ²)=(op A)². For example, angular momentum operators M _z ² and M ² are modified by the additive constants ²/2 and 3 ²/2 respectively (M ²0 for electron in the ground state of H atom, rotator never at rest, but spectra unchanged); the average quadratic dispersion of energy is different from zero. These results can be interpreted by assuming that the system is never strictly isolated but communicates with the other systems of the universe by means of electromagnetic interactions. Quantum mechanics would give only average values over a sufficiently long time and would exhibit a quasi-ergodic character. Examples supporting this possibility are given, in particular that of arsines for which quantum forecasts correspond to average values over one year.Dedicated to Professor J. Koutecký on the occasion of his 65th birthday     

Analysis of chlorine and other halogens by activation with photons and neutrons

The analysis of halogens in various matrices is described. Activation analysis with mainly high energy bremsstrahlung (PAA) and pile neutrons (NAA) was applied. In the case of chlorine, fast procedures were worked out requiring not more than 100 min for one determination. The particular problems of fluorine analysis are discussed. The described techniques were applied for the following cases: Determination of total chlorine resp. bromine in oil samples; determination of chlorine in wood, glasses and TiN powders; determination of iodine in ZnSe single crystals using instrumental photoactivation.The limits of detection are: (interference-free in μg/g) F: 0.03/–; Cl: 0.1/0.05; Br: 0.04/0.003 and I: 0.1/0.01 using PAA/NAA. Activation analysis, being independent upon the chemical status of the analyte and usually less affected by blank problems has been found to be a useful complement to conventional chemical analysis. Received: 28 February 199 / Revised: 14 April 1998 / Accepted: 18 April 1998     

Inverse relaxation-model and relation to recovery internal friction

Inverse relaxation is studied for hard elastic polypropylene (HEPP), rubber and non-elastic polypropylene. The results show that contractive stress, stress, and internal friction are three essential factors related to the phenomenon. A three-element model in which each element has a definite meaning is proposed to describe this phenomenon. The results also show that, in the first cyclic deformation, relaxation time increases with the increase of recovery for all the materials, which indicates that recovery viscosity increases with the increase of recovery, but the stress rising amplitude (SRA) of inverse relaxation has a maximum in the recovery range. Analysis indicates that SRA equals recovery internal friction (RIF) for ideal material in which stress is solely a function of strain, independent of paths, and approximately equals RIF for non-ideal material at a given strain. From this principle it is found that the order of the work counteracted by RIF for the four materials is the same as that of their second hysteresis loop, and the RIF of HEPP has a sudden increase at the later recovery range.     

Fungicidal properties of meso-arylglycosylporphyrins: influence of sugar substituents on photoinduced damage in the yeast Saccharomyces cerevisiae

A series of neutral meso-arylglycosylporphyrins has been tested in order to evaluate their potency as antifungal agents against the yeast Saccharomyces cerevisiae. Photodynamic activity of these molecules results in intracellular damage as evidenced by the loss of clonogenicity and DNA fragmentation. The ability of these photosensitizers to permeate yeast cells is determined by microspectrofluorimetry and is correlated with their antifungal potency. Amphiphilic porphyrin derivatives are shown to exhibit the more pronounced photoactivity.     

Enantiospecific synthesis of the (9S,18R)-diastereomer of the leukocyte adhesion inhibitor cyclamenol A

Cyclamenol A is one of the very few non-carbohydrate and non-peptide natural products that inhibit leukocyte adhesion to endothelial cells. We report on the first enantioselective total synthesis of the (9S, 18R)-diastereomer of this macrocyclic polyene lactam. Key elements of the synthesis are i) the synthesis of the required chiral building blocks by employing readily accessible building blocks from the chiral pool, that is, (S)-malic acid and (R)-hydroxyisobutyric acid, ii) assembly of a linear polyene precursor by means of Wittig and Horner olefination reactions as key C-C bond-forming transformations, iii) ring closure by means of a vanadium-mediated pinacolisation reaction and iv) conversion of the generated cis-diol into a (Z)-olefin to complete the entire polyene system of the natural product. Attempts to close the macrocyclic ring by a macrolactamisation, a double Stille coupling or direct olefination in a McMurry reaction failed. Crucial to the successful completion of the synthesis was the correct orchestration of the final steps. It was necessary to first deprotect the intermediate formed after macrocycle formation and to generate the sensitive heptaene system in the last step by means of a Corey-Hopkins sequence.     

Synthesis and X-ray crystal structure determination of first examples of donor-functionalized terphenyl lanthanide complexes

The molecular structures of novel donor-functionalized terphenyl derivatives of trivalent ytterbium, yttrium, and samarium of composition [DanipYb(mu2-Cl)2(mu3-Cl)Li(THF)]2 (1) and [DanipLn(mu2-Cl)2(mu2-Cl)Li(THF)2]2 (Ln = Y, 2; Ln = Sm, 3) are reported [Danip = 2,6-di(o-anisol)phenyl]. The complexes are obtained from the reaction of equimolar amounts of DanipLi and LnCl3 (Ln = Yb, Y, Sm) in tetrahydrofuran at room temperature in 60% yield. 1-2 toluene crystallizes in the monoclinic space group Ponebar. Crystal data for 1-2 toluene at 203 K: a = 9.7281(9) A; b = 12.7989(12) A; c = 13.4870(12) A; alpha = 91.553(2) degrees; beta = 103.957(2) degrees; gamma = 109.916(2) degrees; V = 1521.2(2) A(3); Z' = 1; D(calcd) = 1.615 g cm(-3); R1 = 3.43%. 2-toluene crystallizes in the monoclinic space group Ponebar. Crystal data for 2-toluene at 203 K: a = 10.4152(10) A; b = 12.5783(12) A; c = 14.4640(14) A; alpha = 69.963(2) degrees; beta = 80.900(2) degrees; gamma = 66.603(2) degrees; V = 1633.3(3) A(3); Z' = 1; D(calcd) = 1.386 g cm(-3); R1 = 4.07%. 3-toluene crystallizes in the monoclinic space group Ponebar. Crystal data for 3-toluene at 203 K: a = 10.3457(8) A; b = 12.5658(10) A; c = 14.4365(11) A; alpha = 70.2250(10) degrees; beta = 81.2820(10) degrees; gamma = 66.8330(10) degrees; V = 1623.3(2) A(3); Z' = 1; D(calcd) = 1.521 g cm(-3); R1 = 3.40%. Complexes 1-3 represent first examples of donor-functionalized terphenyl complexes of the elements ytterbium, yttrium, and samarium, respectively. The molecular structures of 1-3 feature a "constraint geometry" type arrangement of the Danip ligand at the lanthanide atom. The complexes reported are dimeric and composed of lithium chloride bridged DanipLnCl(2) moieties (Ln = Yb, Y, Sm), stabilized through additional coordination of two methoxy functions to the lanthanide atom.     

合成云母蒙脱石及其交联物在乙醇氨化反应中的催化行为

用水热法合成了云母蒙脱石,并与羟基铝齐聚物交联,DTA和IR结果表明,由于柱的引进,高温焙烧时层内八面体上羟基脱除变得较为容易。由NH_3-TPD和吡啶吸附测得的表面酸性表明Al-CLS具有较SMM更多的弱酸和强酸中心。催化剂上弱酸中心有利于醇的脱水,而吸附在强酸中心上的NH_3有利于醇的胺化。     

Influence of reduction conditions on H2 adsorption in high-surface Rh/CeO2 catalysts as deduced by volumetry, calorimetry, and 1H NMR techniques

1H NMR spectra corresponding to H2 adsorption on high-surface Rh/CeO2 catalysts (S(BET) approximately 55 m2/g) are formed by two lines, attributed to hydrogen adsorbed on ceria (resonance line A) and rhodium-metal particles (upfield-shifted line B). The evolution of 1H NMR spectra as a function of temperature, time, and type of reduction (static or dynamic) allows the study of the progressive establishment of the strong metal-support interaction (SMSI) in Rh/CeO2 catalysts. As the reduction progresses, the mean adsorption heat and the amount of hydrogen adsorbed on the metal, deduced from volumetry, NMR, and calorimetry techniques, decrease considerably. As a consequence of the decrease in metal activity, the amount of hydrogen transferred to the support CeO2 is also reduced (spill-over processes). Outgassing of samples at 773 K eliminates hydrogen species retained at the metal-support surface, and oxidation treatments at 473 and 673 K eliminate the electronic effect and physical blocking of metal particles. The oxidation at 673 K recuperates the total adsorption capacity of metal particles. On the basis of these treatments, the contribution of different processes to the SMSI effect is analyzed. Electronic perturbation of rhodium particles is higher when reductions are performed in dynamic conditions; however, the importance of physical blocking of metal particles increases in static reductions. High reducibility of ceria strengthens electronic effects in Rh/CeO2 compared to those observed in Rh/TiO2 catalysts.     

Electron transfer in proteins: nonorthogonal projections onto donor-acceptor subspace of the Hilbert space

We develop nonorthogonal projectors, called L?wdin projectors, to construct an effective donor-acceptor system composed of localized donor (D) and acceptor (A) states of a long-distance electron transfer problem. When these states have a nonvanishing overlap with the bridge states these projectors are non-Hermitian and there are various possible effective two-level systems that can be built. We show how these can be constructed directly from the Schr?dinger or Dyson equation projected onto the D-A subspace of the Hilbert space and explore these equations to determine the connection between Hamiltonian and Green function partitioning. We illustrate the use of these effective two-level systems in estimating the electron transfer rate in the context of a simple electron transfer model.