Erratum to: Magnetic Properties of Fe4BO7 and Mn4BO7 Tetraborates in Three Structure Types

JETP Letters - An Erratum to this paper has been published: https://doi.org/10.1134/S0021364022400028     

On the redox reactions between allyl radicals and NOx

NO_x mitigation is a central focus of combustion technologies with increasingly stringent emission regulations. NO_x can also enhance the autoignition of hydrocarbon fuels and can promote soot oxidation. The reaction between allyl radical (C₃H₅) and NO_x plays an important role in the oxidation kinetics of propene. In this work, we measured the absolute rate coefficients for the redox reaction between C₃H₅ and NO_x over the temperature range of 1000–1252 K and pressure range of 1.5–5.0 bar using a shock tube and UV laser absorption technique. We produced C₃H₅ by shock heating of C₃H₅I behind reflected shock waves. Using a Ti:Sapphire laser system with frequency quadrupling, we monitored the kinetics of C₃H₅ at 220 nm. Unlike low-temperature chemistry, the two target reactions, C₃H₅ + NO → products (R1) and C₃H₅ + NO₂ → products (R2), exhibited a strong positive temperature dependence for this radical-radical type reaction. However, these reactions did not show any pressure dependence over the pressure range of 1.5–5.0 bar, indicating that the measured rate coefficients are close to the high-pressure limit. The measured values of the rate coefficients resulted in the following Arrhenius expressions (in unit of cm³/molecule/s):$k_1\left({\mathrm{C}}_3{\mathrm{H}}_5+\text{NO}\right)=1.49\times {10}^{?10}\exp \left(?6083.6\frac{\mathrm{K}}{T}\right)\left(1017?1252K\right)$$k_2\left({\mathrm{C}}_3{\mathrm{H}}_5+\mathrm{N}{\mathrm{O}}_2\right)=1.71\times {10}^{?10}\exp \left(?3675.7\frac{\mathrm{K}}{T}\right)\left(1062?1250K\right)$To our knowledge, these are the first high-temperature measurements of allyl + NO_x reactions. The reported data will be highly useful in understanding the interaction of NO_x with resonantly stabilized radicals as well as the mutual sensitization effect of NO_x on hydrocarbon fuels.     

Differential Graded Bocses and A ∞ $A_{\infty }$ -Modules

Algebras and Representation Theory - We introduce and study the category of twisted modules over a triangular differential graded bocs. We show that in this category idempotents split, that it...     

Synthesis,characterization, and transport properties of Nafion-polypyrrole membrane for direct methanol fuel cell (DMFC) application

Journal of Solid State Electrochemistry - Due to their distinctive chemical, electronic, and environmental properties, polypyrrole is used as a blocking barrier for methanol leakage in direct...     

On Anomalous Dissipation in the Plasma of the Dusty Lunar Exosphere

JETP Letters - One of the main features of the dusty plasma compared to the conventional plasma (without charged dust particles is anomalous dissipation that is caused by the charging of dust...     

Function of the Non-Crystalline X-Ray Amorphous Phase of Highly Dispersed Powder of CaO in Adsorption of CO2 and H2O

Russian Journal of General Chemistry - Highly dispersed CaO has been synthesized by heating an aqueous solution of calcium nitrate and D-glucose up to 800°C. Calcium oxide is formed with an...     

Chiral 7-Oxabicyclo[2.2.1]heptane Building Blocks for Prostanoids

Russian Journal of Organic Chemistry - Methyl (Z)-3-[(2R,3R,4S,5S)-5-(2-methoxy-2-oxoethyl)-3,4-(isopropylidenedioxy)tetrahydrofuran-2-yl]-prop-2-enoate was synthesized, and its intramolecular...     

Synthesis of Polyol Tetrabromophthalate and Its Use as a Component for Preparing Foamed Polyurethanes of Reduced Flammability

A procedure was suggested for preparing brominated polyols of reduced viscosity for the synthesis of foamed polyurethanes of reduced flammability. The flame-retarding action of the synthesized polyol tetrabromophthalate in polyurethane was studied in comparison with that of other widely used flame retardants. Evaluation of the effect exerted on the flammability of the polurethane compound by the polyol tetrabromophthalate synthesized, melamine, and aluminum hydroxide shows that all the samples containing flame retardants are self-extinguishing. The shortest combustion time was observed for the sample containing 6% polyol tetrabromophthalate synthesized. The sample containing as a flame retardant additive solely the synthesized polyole tetrabromophthalate also exhibits the highest performance as a heat-insulating material from the viewpoint of thermal conductivity.

     

Regio- and Stereoselective Addition of Selenium Dichloride to Alkyl Propiolates

Russian Journal of Organic Chemistry - The reaction of selenium dichloride with methyl and ethyl propiolates leads to formation of anti-Markovnikov adducts. The regio- and stereoselective synthesis...