Alkaline Protease Production from <Emphasis Type="Italic">Brevibacterium luteolum</Emphasis> (MTCC 5982) Under Solid-State Fermentation and Its Application for Sulfide-Free Unhairing of Cowhides

Enzyme-based unhairing in replacement of conventional lime sulfide system has been attempted as an alternative for tackling pollution. The exorbitant cost of enzyme and the need for stringent process control need to be addressed yet. This study developed a mechanism for regulated release of protease from cheaper agro-wastes, which overcomes the necessity for stringent process control along with total cost reduction. The maximum protease activity of 1193.77 U/g was obtained after 96 h of incubation with 15% inoculum of the actinomycete strain Brevibacterium luteolum (MTCC 5982) under solid-state fermentation (SSF). The medium after SSF was used for unhairing without the downstream processing to avoid the cost involved in enzyme extraction. This also helped in the regulated release of enzyme from bran to the process liquor for controlled unhairing and avoided the problem of grain-pitting. Unhairing process parameters were standardized as 20% enzyme offer, 40% Hide-Float ratio at 5 ± 1 rpm, and process pH of 9.0. The cost of production of 1000 kU of the protease was calculated as 0.44 USD. The techno-economic feasibility studies for setting up an SSF enzyme production plant showed a high return on investment of 15.58% with a payback period of 6.4 years.     

Hydrogenation of diacetyl over composite-supported egg-shell noble metal catalysts

Two composite supports with a mixed inorganic–organic structure were synthesized: BTAl and UTAl. Hydrophilic–hydrophobic dual properties of the supports were suitable for preparing egg-shell-supported metal catalysts for selective hydrogenation reactions. The catalysts were characterized by ICP, XRD, OM, TEM, EPMA, XPS and TGA. Their mechanical resistance was assessed. Activity and selectivity were tested with the hydrogenation of 2,3-butanedione (diacetyl) to 3-hydroxy-2-butanoneacetoin (acetoin). The same order of increasing metal particle size was found for the two tested supports: Pt < Ru < Pd. The XPS analysis showed that the metal/composite catalysts reduced in H2 at 503 K had two kinds of active sites: reduced (Me°) and electron-deficient (Me⁺). It was rationalized that the hydrogen bond cleavage was performed on the Me° active sites, while reactant adsorption occurred on the Me⁺ sites. The differences in activity and selectivity between the composite catalysts were attributed to electronic effects on the different metals and to different adsorptive properties of the different polymers. The high selectivity to acetoin was attributed to the preferential adsorption of diacetyl as compared to the adsorption of acetoin. The BTAl catalysts were slightly more active and selective than the UTAl ones. This was attributed to electronic effects caused by remnant organic groups on the composite supports (urethane or biphenyl on UTAl or BTAl, respectively). Pd-BTAl was the most active and selective catalyst, a fact related to electronic effects of both palladium and the support.     

Optical activity of films based on chitosan of various molecular masses and modifications

The effect of chemical (polysalt → polybase reaction) and physicochemical (heat and vapor processing) modifications of the films of chitosan of various molecular masses and prehistories on the optical activity of the polysaccharide is studied. For both of the chitosan chemical modifications, the following dependence that is nontrivial for high-molecular compounds is established: [α] = f(log\({\bar M_\eta }\)); as the degree of polymerization decreases, the modulus of [α] of the films increases. The X-ray diffraction study shows that the differences in the optical activity of the samples with different \({\bar M_\eta }\) are caused by a restriction in the mobility of the macromolecular sections upon formation of the films of high-molecular chitosan and incompleteness of the relaxation processes of the film systems to the state with energetically favorable conformations. The comparison of humidity and optical and biological activities of the initial and dehydrated chitosan films is performed. The chitosan films in the salt modification feature moderate bactericidal activity, which decreases with an increase in \({\bar M_\eta }\) of the polymer. The thermal processing of the salt modification reduces the antibacterial action; a conversion to the base form is accompanied by the loss of bactericidal activity.     

Structural properties of star-shaped polyions: Entropic sampling

The method of entropic sampling within the Wang–Landau algorithm (a modern variant of the Monte Carlo method) is used to determine the densities of energy states of a strongly charged star-shaped polyelectrolyte within the framework of the lattice model. The equilibrium thermal and structural properties of the polyelectrolyte with the number of arms f ≤ 6 and the length of arms N _arm ≤ 73 in a wide temperature range are determined from the density of states. Such characteristics as the free energy, the mean-squared radius of gyration, its components, and the parameters characterizing the shape of a polyion are calculated. It is found that the concentration, length, and number of arms affect the thermal and structural properties. The main attention is focused on the effect of temperature on these properties. The coil-to-globule transition is detected, while for the polyion with the highest length of arms (N _arm = 24) the transition from the liquid globule to the crystal-like one is observed. Differences in the properties of the star-shaped and corresponding linear polyions are characterized.     

Symmetrical triindole as a central unit in the fluorene-containing polyphenol assembly

A new strategy was proposed for the synthesis of fluorene-containing indole polyphenols, based on the Suzuki–Miyaura reaction of hexabrominated symmetric indole trimer with the monoboryl N,N'-di[9,9'-bis(3',5'-dimethoxybenzyl)fluoren-2'-yl]aniline derivative and subsequent chemical transformations. The prepared compound was applicable for the development of a promising positive resist for electron-beam nanolithography capable of forming patterns with a 12 nm resolution.     

Visualization of supramolecular framework of perfluorinated-oligomer colloid particles by supercritical drying

Aerogels of the tetrafluoroethylene radical polymerization products H(C₂F₄)_nR, where R is the radical formed by the abstraction of a hydrogen atom from a solvent molecule, have been obtained by replacing the solvent with supercritical CO₂ and its subsequent rapid evaporation. According to the data of scanning electron and atomic force microscopy, the aerogel consists of loosely bound particles of 1–3 μm in diameter, which is two to three times that of colloid particles in the initial solution, where the particles consist of an oligomer framework filled with solvent molecules. The internal structure of the framework is manifested in the surface topography with a roughness coefficient of 1.6–1.8. High roughness leads to the formation of ultrahydrophobic coatings with contact angles of >160°. A model of supercritical drying in which the solvent is removed from the colloidal particles without alteration of the supramolecular structure is discussed.     

Formation of benzenediols upon electron-beam distillation of lignin mixtures with alkanes

In the process of the electron-beam distillation of lignin, its conversion into benzenediols increases in the presence of alkanes in the irradiated sample. An increase in the yield of benzenediols is accompanied by a decrease in the fractions of guaiacol, creosol, ethylguaiacol, and vinylguaiacol in the tar distilled off. It has been noted that alkanes serve as an additional source of atomic hydrogen and alkyl radicals, which, in turn, play a key role in the formation of benzenediols. In the presence of alkanes in the irradiated sample, guaiacol can be the main precursor of catechols; the proportion of guaiacol in the tar is almost three times below that in the case of distillation of individual lignin. It has been hypothesized that the chain decomposition of lignin can occur with the participation of ?H and ?CH₃ radicals.     

Experimental study of gasification of vacuum residue in metal melt by alternating reactor feeding with carbonaceous feedstock and oxidant

Processes occurring in a metal melt during plasma-assisted melt gasification of carbonaceous feedstock have been studied in the mode of alternating feeding the reactor with the carbonaceous feedstock and oxidant. Vacuum residue was used as an oxygen-free carbonaceous material, and air and steam were used as an oxidant. The results of the study show that by alternating the carbonaceous-feedstock pyrolysis step and the step of carbon oxidation in the metal melt, it is possible to produce synthesis gas with any desired H₂/CO ratio.     

Conversion of hydrocarbon gases in dielectric barrier discharge in the presence of water

The conversion of C₁–C₄ hydrocarbons into gaseous and liquid products in a dielectric barrier discharge plasma in the presence of water has been studied. The formation of a deposit on the electrode surface is prevented by introducing water in the liquid state into a gaseous hydrocarbon stream, a finding that has been confirmed by IR spectroscopic study of the electrode surface. Hydrogen and C₂₊ hydrocarbons have been detected among the gaseous products of conversion, the liquid products being represented by C₆–C₁₀₊ alkanes. The total liquid products have amounted to 13.4, 26.0, or 36.6% for the methane, propane, or n-butane conversion, respectively. A 10% propane or butane admixture to methane increases the yield of the liquid products to make 22.0 and 31.7% for the methane–propane and the methane–butane mixture, respectively.