Synthesis of boronic acid‐functionalized poly(glycerol‐oligoγ‐butyrolactone): Nano‐networks for efficient electrochemical sensing of biosystems

Despite the outstanding properties of hyperbranched polyglycerols such as biocompatibility and multifunctionality, enough attention has not been paid to the synthesis of their functional copolymers. This problem has limited the structural diversity of hyperbranched polyglycerols and hampers further developments and their practical usage. In this work, butyrolactone segments were incorporated into the backbone of polyglycerols by one‐pot ring‐opening copolymerization of a mixture of glycidol and γ‐butyrolactone in the presence of tin(II) 2‐ethylhexanoate. Poly(glycerol‐oligoγ‐butyrolactone)s were then crosslinked by 2,5‐thiophenediylbisboronic acid to obtain polymeric nanonetworks with 140 nm average size. Afterwards, the gold electrode was modified by the polymeric nano‐networks, and it was used for the determination of glucose, glycated hemoglobin, and Escherichia coli in phosphate buffer solution (pH = 9.0) through cyclic voltammetry and impedance spectroscopic. Taking advantage of the straightforward synthesis, cheap precursors and multifunctionality of poly(glycerol‐oligoγ‐butyrolactone)s, they could be used for real‐time sensing of a wide range of biosystems. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1430–1439     

Asymmetric cross-aldol reaction of isatin and ketones catalyzed by crude earthworm extract as efficient biocatalyst

ABSTRACT

The asymmetric cross-aldol reaction of simple ketones (acetone, cyclohexanone) with isatin derivatives in the presence of crude extract from earthworms as green and effective biocatalyst proceeds easily in MeCN/H₂O (1:1) as solvent to afford 3-hydroxy-2-oxindoles derivatives. Ten compounds were synthesized in high yields (62–88%) and moderate ee (29–42%). Structure of the synthesized compounds has been characterized on the basis of NMR spectra and CHN analysis. The ee of the obtained compounds was determined by chiral phase HPLC analysis.     

Fabrication of bulk-modified carbon paste electrode containing alpha-PW12O40(3-) polyanion supported on modified silica gel: Preparation, electrochemistry and electrocatalysis

Alpha-PW(12)O(40)(3-) (PW(12)) supported on the surface of silica gel derivatized by 3-aminopropyl(triethoxy)silane (devoted briefly as SiNH(3)PW(12)) was synthesized and used as bulk modifier to fabricate a renewable three-dimensional chemically modified electrode. The electrochemical behavior of the modified electrode was characterized by cyclic voltammetry. There is an ionic bonding character between PW(12) and the surface amino groups of modified silica, which greatly improves the stability of SiNH(3)PW(12)-modified carbon paste electrode due to insolubility of silica gel in water. The SiNH(3)PW(12) bulk-modified carbon paste electrode not only maintains the electrochemical activity of PW(12), but also exhibits remarkable advantages of renewability, as well as simple preparation and inexpensive material. The modified electrode offers an excellent and stable electrocatalytic response for the reduction of IO(3)(-) and hydrogen peroxide. The SiNH(3)PW(12)-CPE is successfully applied as an electrochemical detector to monitor IO(3)(-) in flow injection analysis (FIA). The catalytic peak current was found to be linear with the IO(3)(-) concentration in the range 5x10(-6) to 1x10(-3)molL(-1). The detection limit of the proposed method was found to be 3.1x10(-6)molL(-1) for IO(3)(-) determination.     

In-situ copolymerization of aniline with alkyl amine by APS： Kinetics and application

The kinetic study of in-situ eopolymerization of aniline with o- and p-methylaniline by ammonium persulfate （APS） has been carried out. UV-vis spectroscopic method was used to investigate the course of copolymerization. Structural characterization was studied by PT-IR spectral analysis. The electronic spectra of the copolymers poly（aniline-co-p-toluidine） and poly（aniline-co-o- toluidine） show blue shift. The shift has been observed in the bands corresponding to π→π^＊ transition as well as in the exciton transition. The increase in absorbance recorded during the reaction for different concentration of aniline, o- and p-toluidine at various intervals of time of polymerization reaction indicates a growth in the polymer formation. The resulting first-order rate constant was used to calculate the rate of copolymer formation using the rate equation -d[A]/dt = kc^n.     

The Sextic Centrifugal Distortion Terms for an Open-Shell Complex Consisting of a Diatomic Molecule in a Σ Electronic State and a Closed-Shell Partner

An effective Hamiltonian for calculating rotational energy levels of an open-shell diatomic molecule, in a ^2S+1Σ electronic state, weakly bonded to a closed-shell partner was presented (W. M. Fawzy, J. Mol. Spectrosc. 191, 68–80 (1998)). The Hamiltonian was given as H = H_ev + H_rot + H_sr + H_ss + H_cd + H_srcd + H_sscd, where all the quartic centrifugal distortion correction terms were included in the Hamiltonian term H_cd but the sextic centrifugal distortion terms were ignored. This Hamiltonian is useful in cases where the complex has a well-defined equilibrium geometry and if the barrier to large-amplitude motion is large compared to the rotational constant of both the closed-shell molecule and its paramagnetic partner; if the barrier to large-amplitude motion is small compared to the rotational constant of one or both of the fragments, then a different treatment is required. In this paper, we introduce the new Hamiltonian terms H^sex(A)_cd and H^sex(S)_cd, which represent the sextic centrifugal distortion correction terms for an asymmetric rotor. We also introduce all the nonvanishing matrix elements of each of the H^sex(A)_cd and H^sex(S)_cd operators. These operators and their matrix elements are required for calculating the rotational energy levels of relatively high J values in the described type of weakly bonded open-shell complexes. The terms H^sex(A)_cd and H^sex(S)_cd and their matrix elements are also valid for any stable asymmetric rotor in a nondegenerate electronic state. A brief discussion of the new Hamiltonian terms and their matrix elements is given.     

Enrichment of Zinc and Iron Micronutrients in Lentil (Lens culinaris Medik.) through Biofortification

Biofortification of pulse crops with Zn and Fe is a viable approach to combat their widespread deficiencies in humans. Lentil (Lens culinaris Medik.) is a widely consumed edible crop possessing a high level of Zn and Fe micronutrients. Thus, the present study was conducted to examine the influence of foliar application of Zn and Fe on productivity, concentration, uptake and the economics of lentil cultivation (LL 931). For this, different treatment combinations of ZnSO₄·7H₂O (0.5%) and FeSO₄·7H₂O (0.5%), along with the recommended dose of fertilizer (RDF), were applied to the lentil. The results of study reported that the combined foliar application of ZnSO₄·7H₂O (0.5%) + FeSO₄·7H₂O (0.5%) at pre-flowering (S1) and pod formation (S2) stages was most effective in enhancing grain and straw yield, Zn and Fe concentration, and uptake. However, the outcome of this treatment was statistically on par with the results obtained under the treatment ZnSO₄·7H₂O (0.5%) + FeSO₄·7H₂O (0.5%) at S1 stage. A single spray of ZnSO₄·7H₂O (0.5%) + FeSO₄·7H₂O (0.5%) at S1 stage enhanced the grain and straw yield up to 39.6% and 51.8%, respectively. Similarly, Zn and Fe concentrations showed enhancement in grain (10.9% and 20.4%, respectively) and straw (27.5% and 27.6% respectively) of the lentil. The increase in Zn and Fe uptake by grain was 54.8% and 68.0%, respectively, whereas uptake by straw was 93.6% and 93.7%, respectively. Also the benefit:cost was the highest (1.96) with application of ZnSO₄·7H₂O (0.5%) + FeSO₄·7H₂O (0.5%) at S1 stage. Conclusively, the combined use of ZnSO₄·7H₂O (0.5%) + FeSO₄·7H₂O (0.5%) at S1 stage can contribute significantly towards yield, Zn and Fe concentration, as well as uptake and the economic returns of lentil to remediate the Zn and Fe deficiency.     

An efficient method for nonlinear aeroelasticy of slender wings

This paper aims the nonlinear aeroelastic analysis of slender wings using a nonlinear structural model coupled with the linear unsteady aerodynamic model. High aspect ratio and flexibility are the specific characteristic of this type of wings. Wing flexibility, coupled with long wingspan can lead to large deflections during normal flight operation of an aircraft; therefore, a wing in vertical/forward-afterward/torsional motion using a third-order form of nonlinear general flexible Euler–Bernoulli beam equations is used for structural modeling. Unsteady linear aerodynamic strip theory based on the Wagner function is used for determination of aerodynamic loading on the wing. Combining these two types of formulation yields nonlinear integro-differentials aeroelastic equations. Using the Galerkin’s method and a mode summation technique, the governing equations will be solved by introducing a numerical method without the need to adding any aerodynamic state space variables and the corresponding equations related to these variables of the problem. The obtained equations are solved to predict the aeroelastic response of the problem. The obtained results for a test case are compared with those of some other works and show a good agreement between results.     

Determining the gamma-ray parameters for BaO–ZnO–B2O3 glasses using MCNP5 code: a comparison study

Rapid technological advancement has multiplied people’s exposure to ionizing radiations greatly. Widespread applications of radiation in different fields (such as agriculture, radiation therapy and scientific research fields) require that humans be protected against unnecessary exposure. In this study, mass attenuation coefficient (μ_m), half-value layer, mean-free path, effective atomic number (Z_eff) and exposure buildup factor have been calculated for xBaO–20ZnO–(80???x)B₂O₃ (x?=?5, 10, 15, 20 and 25?mol%) glass systems. The mass attenuation coefficients of the selected glasses were calculated using simulation method of MCNP5 code. The simulation results have been compared with the experimental data and Xcom at the energies 223.02, 252.98, 287.28, 340.83, 398.97, 481.59, 562.68 and 662.00?keV. The agreement amounts of the mass attenuation coefficient values are from 0.2% to 2.8% and from 0.2% to 6.98% for MCNP5 and Xcom relative to experimental results, while the Monte Carlo program values are higher than that obtained by experimental data, using Xcom and MCNP5 code. The glass sample having the highest value of BaO content show high radiation shielding properties. It indicates that the MCNP5 code can be used for estimation of radiation interaction parameters where experimental results are not available.     

Catalytic dechlorination of Aroclor 1242 by Ni/Fe bimetallic nanoparticles

Ni/Fe bimetallic nanoparticles were synthesized for treatment of Aroclor 1242, in order to evaluate their applicability for in situ remediation of groundwater and soil contaminated by polychlorinated biphenyls (PCBs). Our experimental results indicate that the total PCB concentration changed during the reduction of 3,5-dichlorobiphenyl (PCB 14), and biphenyl was produced as the final product. Initially, the concentration of 3-chlorobiphenyl (PCB 2) was increased in the prophase reaction and then slowly decreased, suggesting that Aroclor 1242 was first adsorbed by Ni/Fe nanoparticles, and then, the higher chlorinated congeners were converted gradually to the lower chlorinated congeners, and finally to biphenyl. The dechlorination efficiency of Aroclor 1242 reached approximately 80% at 25°C in just 5h, then 95.6% and 95.8% in 10h and 24h, respectively. The study revealed that high Ni/Fe nanoparticle dosage and high Ni content in Ni/Fe nanoparticles favor the catalytic dechlorination reaction. Moreover, a comparison of different types of catalysts on the dechlorination of Aroclor 1242 indicated that Ni/Mg and Mg powders showed a greater reactivity than Ni/Fe and Fe nanoparticles, respectively.