The impact of the cononsolvency effect on poly (N-isopropylacrylamide) based microgels at interfaces

The paper addresses the effect of solid interfaces on the cononsolvency effect for poly(N-iso propylacrylamide) based microgels containing different contents of the co-monomer allyl acetic acid (AAA). The cononsolvency effect is studied by dynamic light scattering (DLS) in solution and with atomic force microscopy (AFM) at surfaces against different mixtures of water and organic solvent (ethanol, iso-propanol, and tetrahydrofuran). For the studies at interfaces, the microgels are spin coated on silicon wafers that are precoated with poly(allylamine hydrochloride) (PAH). The minimum in particle volume due to cononsolvency shows a pronounced shift from 10–20 % of organic solvent to 40–50 % after deposition at the Si/PAH wafer. The strong shift indicates an increase of water to organic solvent ratio within the gel at the surface with respect to the bulk solution. In order to understand the increase of water to organic solvent ratio, shrinking/reswelling AFM experiments for different spin-coating conditions and under ambient conditions are carried out. Spin coating from water instead from different solvent mixtures has no effect on the cononsolvency. In ambient conditions, the cononsolvency effect disappears     

Experimental evidence for violation of the fluctuation-dissipation theorem in a superspin glass

We present the experimental observation of the fluctuation-dissipation theorem violation in an assembly of interacting magnetic nanoparticles in the low temperature superspin-glass phase. The magnetic noise is measured with a two-dimension electron gas Hall probe and compared to the out of phase ac susceptibility of the same ferrofluid. For "intermediate" aging times of the order of 1 h, the ratio of the effective temperature T(eff) to the bath temperature T grows from 1 to 6.5 when T is lowered from T(g) to 0.3 T(g), regardless of the noise frequency. These values are comparable to those measured in an atomic spin glass as well as those calculated for a Heisenberg spin glass.     

Anti-Invar properties and magnetic order in fcc Fe-Ni-C alloy

Anti-Invar effect was revealed in the fcc Fe-25.3%Ni-0.73%C (wt%) alloy, which demonstrates high values of thermal expansion coefficient (TEC) (15-21)×10⁻⁶ K⁻¹ accompanied by almost temperature-insensitive behavior in temperature range of 122-525 K. Alloying with carbon considerably expanded the low temperature range of anti-Invar behavior in fcc Fe-Ni-based alloy. The Curie temperature of the alloy T_C=195 K was determined on measurements of temperature dependences of magnetic susceptibility and saturation magnetization. The Mössbauer and small-angle neutron scattering (SANS) experiments on the fcc Fe-25.3%Ni-(0.73-0.78)%C alloys with the varying temperatures below and above the Curie point and in external magnetic field of 1.5-5 T were conducted. Low value of the Debye temperature Θ_D=180 K was estimated using the temperature dependence of the integral intensity of Mössbauer spectra for specified temperature range. The inequality B_eff=(0.7-0.9)B_ext was obtained in external field Mössbauer measurement that points to antiferromagnetically coupled Fe atoms, which have a tendency to align their spins perpendicular to B_ext. Nano length scale magnetic inhomogeneities nearby and far above T_C were revealed, which assumed that it is caused by mixed antiferromagnetically and ferromagnetically coupled Fe atom spins. The anti-Invar behavior of Fe-Ni-C alloy is explained in terms of evolution of magnetic order with changing temperature resulting from thermally varied interspin interaction and decreasing stiffness of interatomic bond.     

Transparent Aluminium Oxide Coatings of Polymer Brushes

A novel method for the preparation of transparent Al₂O₃ coatings of polymers is presented. An environmental‐friendly sol–gel method is employed, which implies mild conditions and low costs. A thermoresponsive brush is chosen as a model surface. X‐ray photoelectron spectroscopy is used to characterize the samples during the conversion of the precursor Al(OH)₃ into oxide and to prove the mildness of the protocol. The study evidences a relation between lateral homogeneity of alumina and the wettability of the polymer surface by the precursor solution, while morphology and elasticity are dominated by the polymer properties. The study of the swelling behavior of the underneath brush reveals the absence of water uptake, proving the impermeability of the alumina layer. The broad chemical and structural variety of polymers, combined with the robustness of transparent alumina films, makes these composites promising as biomedical implants, protective sheets and components for electric and optical devices.     

Packing density control in P(NIPAM-co-AAc) microgel monolayers: effect of surface charge, pH, and preparation technique

In the present paper, thermosensitive coatings are prepared by deposition of P(NIPAM-co-AAc) microgel particles on precoated silicon wafers. The effect of pH, substrate precoating, and preparation technique is studied. The pH value is found to significantly influence the adsorption density, while the substrate surface charge is less important. Hence, the electrostatic contribution of the particle-particle interaction seems to play a more pronounced role for the adsorption density than at least the electrostatic part of the particle-surface interaction. For the latter, also nonelectrostatic contributions like hydrogen bonding and surface roughness play an important role. Immersion of the prepared polyelectrolyte/microgel layers in buffers leads to a reorganization of the adsorbed particles at the surface.     

Synthesis and structural characterization of monomeric heterobimetallic oxides with a GeII-O-M skeleton (M = Yb, Y)

The germanium hydroxide complexes LGe(mu-O)M(THF)Cp2 (M = Yb, 1; Y, 2; L = HC[C(Me)N(Ar)]2; Ar = 2,6-iPr2C6H3) were prepared by the reaction of LGeOH with Cp3M (M = Yb, Y) in THF at ambient temperature with the elimination of HCp. 1 and 2 are pale-yellow solids. Both compounds crystallize isotypically as monomers in a triclinic space group P (pseudo-merohedrally twinned, two independent molecules) and were found to be stable in the solid state and in solution at room temperature. The six-membered C3N2Ge rings in 1 and 2 display a boat conformation with the germanium and the gamma-C out-of-plane. The Ge-O-M skeleton exhibits a bent arrangement (angles 151-154 degrees ). The 1H NMR investigation of 2 confirmed that the solid-state structure is also found in solution.     

Long-range interactions between soft colloidal particles in slit-pore geometries

Combining theoretical and experimental techniques, we investigate the structure formation of charged colloidal suspensions of silica particles in bulk and in spatial confinement (slit-pore geometry). Our focus is to identify characteristic length scales determining typical quantities, such as the position of the main peak of the bulk structure factor and the period of the oscillatory force profile in the slitpore. We obtain these quantities from integral equations/SANS experiments (bulk) and Monte Carlo simulations/colloidal probe-AFM measurements (confinement), in which the theoretical calculations are based on the Derjaguin-Landau-Verwey-Overbeck (DLVO) potential. Both in bulk and in the slitpore, we find excellent qualitative and quantitative agreement between theory and experiment as long as the ionic strength chosen in the DLVO potential is sufficiently low (implying a relatively long-ranged interaction). In particular, the bulk properties of these systems obey the widely accepted density scaling of xi proportional to phi(-1/3). On the other hand, systems with larger ionic strengths and, consequently, more short-ranged interactions do not obey such power law behavior and rather resemble an uncharged hard-sphere fluid, in which the relevant length scale is the particle diameter.     

Molecular oxygen activation by a molybdenum(IV) monooxo bis(beta-ketiminato) complex

Molybdenum(IV) monooxo compound that contains bis(beta-ketiminato) ligands activates molecular oxygen forming a molybdenum(VI) monooxo peroxo compound, representing a new entry into molybdenum peroxo derivatives.