Gold microelectrode ensembles: cheap,reusable and stable electrodes for the determination of arsenic (V) under aerobic conditions

The determination of total arsenic through As(V) anodic stripping voltammetry (ASV) is, in some cases, preferable over As(III) ASV. The As(V) ASV procedure has no chemical reduction step from As(V) into As(III), which results in decreased analysis time and no contamination from reducting reagents. A simple and reliable procedure of As(V) determination is proposed. Anodic stripping determination of trace As(V) at gold microelectrode ensembles in diluted HCl solution in the presence of dissolved oxygen is shown. The electrode is based on a carbon black (30%)–polyethylene composite. The sensor was prepared by gold electrodeposition on the surface of the composite electrode. The given sensor is cheap, reliable and stable, especially when electrochemical activation is employed. The experimental parameters for the electrochemical determination were optimized, namely 0.005?M HCl as the background electrolyte, the deposition potential ?2.2?V (versus Ag/AgCl in 1?M KCl) and 180?mV?s^?1 linear scan rate. Calibration curves were obtained and were linear in [As(V)] over the 1.5–45?µg?L^?1 range, with a LOD of 0.5?µg?L^?1. The effect of common interfering species is studied. The electrochemical behaviour of As(III) form is studied in the same experimental conditions. It was found that As(III) is deposited at lower potentials (starting at ?0.6?V) and the sensitivity of As(III) detection is higher, but dependant on the presence of dissolved oxygen. The speciation of inorganic forms of arsenic is discussed.     

The Inclined Wooding Problem

A constant-thickness thermal boundary layer is formed by the presence of uniform suction into a constant temperature hot surface bounding a porous medium—the Wooding problem. When the hot surface lies below the porous medium, the system is susceptible to thermoconvective instability. The present paper is concerned with how the classical linear stability analysis is modified by inclining the heated surface. Analysis is confined to disturbances in the form of transverse rolls because the equivalent analysis for longitudinal rolls may be described analytically in terms of that for the horizontal layer. The linear stability analysis is made difficult by the absence of a second bounding surface, and the method of multiple shooting is needed in order to obviate the consequence of having a stiff system of disturbance equations. Therefore, the computational domain is split into 5 or 10 subdomains. It is found that all modes of instability travel up the heated surface unless the surface is horizontal. The system is found to be linearly stable for all inclinations above \(31.85473^\circ \), a value which is remarkably close to that for the inclined Darcy-Bénard problem.     

The Chemical Vapour Deposition of Tantalum

The effect of the total pressure, feed temperature, deposition temperature, and reaction tube inclination and geometry on the chemical vapour deposition of tantalum from the pentaiodide has been investigated. Transport rates as high as 350 mg hr⁻¹ were achieved in inclined tubes of specific geometry with a feed temperature of 650°C and a deposition temperature of 1200°C. The dependence of the transport rate on the total pressure, and the feed and deposition temperatures has been analysed and suggestions made as to the rate controlling processes.     

Composition,microstructure and mechanical properties of chemically vapour-deposited tantalum

The paper reports the results of a structural investigation of C.V.D. tantalum, which had been deposited on a silica substrate. Deposits at 1000°C were high impurity powders or flakes, at 1100°C (normal deposition temperature) foil-like, these containing much lower silicon contents, being concentrated near the substrate and coming from there by diffusion. The overall silicon content is reported to be due to other kinds of mass transport (i. e. vapour phase transport) and reactions (e.g. Ta with quartz). — Details on the structure and hardness of the Ta layers are given.     

On the Origin of the Non-Arrhenius Na-ion Conductivity in Na3OBr

The sodium-rich antiperovskites (NaRAPs) with composition Na₃OB (B=Br, Cl, I, BH₄, etc.) are a family of materials that has recently attracted great interest for application as solid electrolytes in sodium metal batteries. Non-Arrhenius ionic conductivities have been reported for these materials, the origin of which is poorly understood. In this work, we combined temperature-resolved bulk and local characterisation methods to gain an insight into the origin of this unusual behaviour using Na₃OBr as a model system. We first excluded crystallographic disorder on the anion sites as the cause of the change in activation energy; then identified the presence of a poorly crystalline impurities, not detectable by XRD, and elucidated their effect on ionic conductivity. These findings improve understanding of the processing-structure-properties relationships pertaining to NaRAPs and highlight the need to determine these relationships in other materials systems, which will accelerate the development of high-performance solid electrolytes.