Characterisation of Ni carbonate-bearing minerals by UV–Vis–NIR spectroscopy

Four nickel carbonate-bearing minerals from Australia have been investigated to study the effect of Ni for Mg substitution. The spectra of nullaginite, zaratite, widgiemoolthalite and takovite show three main features in the range of 26,720–25,855 cm⁻¹ (ν₁-band), 15,230–14,740 cm⁻¹ (ν₂-band) and 9,200–9,145 cm⁻¹ (ν₃-band) which are characteristic of divalent nickel in six-fold coordination. The Crystal Field Stabilization Energy (CFSE) of Ni²⁺ in the four carbonates is calculated from the observed ³A_2g(³F) → ³T_2g(³F) transition. CFSE is dependent on mineralogy, crystallinity and chemical composition (Al/Mg-content). The splitting of the ν₁- and ν₃-bands and non-Gaussian shape of ν₃-band in the minerals are the effects of Ni-site distortion from regular octahedral. The effect of structural cation substitutions (Mg²⁺, Ni²⁺, Fe²⁺ and trivalent cations, Al³⁺, Fe³⁺) in the carbonate minerals is noticed on band shifts. Thus, electronic bands in the UV–Vis–NIR spectra and the overtones and combination bands of OH and carbonate ion in NIR show shifts to higher wavenumbers, particularly for widgiemoolthalite and takovite.     

Covalent immobilization of protein onto a functionalized hydrogenated diamond-like carbon substrate

Hydrogenated diamond-like carbon (HDLC) has an atomically smooth surface that can be deposited on high-surface area substrata and functionalized with reactive chemical groups, providing an ideal substrate for protein immobilization. A synthetic sequence is described involving deposition and hydrogenation of DLC followed by chemical functionalization. These functional groups are reacted with amines on proteins causing covalent immobilization on contact. Raman measurements confirm the presence of these surface functional groups, and Fourier transform infrared spectroscopy (FTIR) confirms covalent protein immobilization. Atomic force microscopy (AFM) of immobilized proteins is reproducible because proteins do not move as a result of interactions with the AFM probe-tip, thus providing an advantage over mica substrata typically used in AFM studies of protein. HDLC offers many of the same technical advantages as oxidized graphene but also allows for coating large surface areas of biomaterials relevant to the fabrication of medical/biosensor devices.     

Pyrrolidinyl–Camphor Derivatives as a New Class of Organocatalyst for Direct Asymmetric Michael Addition of Aldehydes and Ketones to β‐Nitroalkenes

Practical and convenient synthetic routes have been developed for the synthesis of a new class of pyrrolidinyl–camphor derivatives ( 7 a–h ). These novel compounds were screened as catalysts for the direct Michael addition of symmetrical α,α‐disubstituted aldehydes to β‐nitroalkenes. When this asymmetric transformation was catalyzed by organocatalyst 7 f , the desired Michael adducts were obtained in high chemical yields, with high to excellent stereoselectivities (up to 98:2 diastereomeric ratio (d.r.) and 99 % enantiomeric excess (ee)). The scope of the catalytic system was expanded to encompass various aldehydes and ketones as the donor sources. The synthetic application was demonstrated by the synthesis of a tetrasubstituted‐cyclohexane derivative from (S)‐citronellal, with high stereoselectivity.     

Synthesis and electrochemical studies on LiV<Subscript>3</Subscript>O<Subscript>8</Subscript>

The compound, lithium trivanadate (LiV₃O₈), was synthesized by the polymer precursor method, using the polymer polyvinylpyrrolidone. The electrochemical performance of LiV₃O₈ was compared with LiV₃O₈ synthesized by the solid state reaction method. The prepared compounds were characterized by X-ray diffraction, scanning electron microscopy, and high-resolution transmission electron microscopy techniques. The electrochemical performances were studied by cyclic voltammetry and galvanostatic cycling in the voltage range of 2.0 to 4.0 V at room temperature (25 °C). The compound prepared by the polymer precursor method was found to have a good cycling stability. A reversible capacity value of 203 mAh/g (2.18 mol of Li) and 170 mAh/g (1.83 mol of Li) was obtained at the end of the 70th cycle, at a current density of 30 and 120 mA/g, respectively.     

Digestion completeness of microwave-assisted and conventional trypsin-catalyzed reactions

Microwave-assisted proteolytic digestion often yields misscleaved peptides, attributed to incomplete hydrolysis reactions between enzymes and substrates. The number of missed cleavages is an important parameter in proteome database searching. This study investigates how various factors affect digestion processes. Optimum conditions for microwave-assisted digestion (50 mM Tris buffer, 30 min at 60°C, and enzyme to protein molar ratio of 1:5) were determined. The digestion products obtained from eight standard proteins were characterized based on matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS). Experimental results indicate that the digestion temperature, reaction time, enzyme to substrate ratio, and digestion buffer affect the number of misscleaved peptides and incomplete digestion percentages. Although all protein molecules in a sample could be digested into peptides within a few minutes under microwave irradiation, longer reaction times or methods to maximize the enzyme activity should be considered if digestion completeness is a major concern.     

Effect of sintering temperature on structural and magnetic properties of NiCuZn and MgCuZn ferrites

The low temperature microwave sintered NiCuZn and MgCuZn ferrites with compositions Ni_0.35Cu_0.05Zn_0.60Fe₂O₄ and Mg_0.35Cu_0.05Zn_0.60Fe₂O₄ were synthesized by conventional mixed oxide method. NiCuZn and MgCuZn ferrite samples obtained showed better sintered densities at 950 and 900 °C, respectively. The scanning electron micrographs of both the ferrite samples appear to be very much similar. The magnitude of initial permeability of MgCuZn ferrite samples is found to be obviously higher than those of NiCuZn ferrite samples at all sintering temperatures. This is mainly due to the fact that MgCuZn ferrite has smaller magnetocrystalline anisotropy constant and magnetostrictive constant. NiCuZn ferrites have higher saturation magnetization than MgCuZn ferrites, which is due to the higher magnetic moment of NiCuZn ferrites. Our results indicate that the microwave sintering method seems to be a potential technique in the MLCI technology.     

Differential Pulse Polarographic Determination of Cd(II) and Pb(II) in Milk Samples after Solid‐Phase Extraction Using Amberlite XAD‐2 Resin Modified with 2,2′‐DPED3P

In the present paper novel column solid phase extraction procedure was developed for the determination of Cd(II) and Pb(II) in cows', goats', ewes', buffalos' and humans' milk samples using newly synthesized reagent 2,2′‐DPED₃P (2,2′‐{[1,2‐diphenylethane‐1,2‐diylidene]dinitrilo}diphenol) for preconcentration and separation prior to differential pulse polarography using amberlite XAD‐2 in the ranges of pH 4.0–5.0. The sorbed elements were subsequently eluted with 10 mL of 2 M HCl elutes were analysed by differential pulse polarography (DPP). The interference of foreign ions has also been studied. Effects of various instrumental parameters are investigated and received conditions are optimized. The total metal concentration of the milk samples in the study area were in the following ranges 0.030–0.090 μg L^?1 of Cd(II), 0.009–0.026 μg L^?1 of Pb(II) respectively. The limits of detections were found to be 0.020 and 0.024 μg L^?1 for Cd(II) and Pb(II) respectively by applying a preconcentration factor ～40. The proposed enrichment method was applied successfully for the determination of metal ions in cows', goats', ewes', buffalos' and humans' milk samples.     

Attempts directed towards the synthesis and determination of the absolute stereochemistry of iso-cladospolide-B and cladospolides-B and C

Attempts to synthesise iso-cladospolide-B, cladospolide-B and cladospolide-C resulted in macrolides 1, 2 and 4 along with butenolide 3. Of the three stereogenic centres, the C-4/C-5 vic-diol was obtained from tartaric acid and d-glucose, while the C-11 stereocentre was created by Jacobsen’s method.     

Electrostatically driven protein aggregation: beta-lactoglobulin at low ionic strength

The aggregation of beta-lactoglobulin (BLG) at ambient temperature was studied using turbidimetry and dynamic light scattering in the range 3.8相似文献   

In situ nucleophilic substitution reaction of N,N-dialkylaminoethyl-2-chlorides monitored by gas chromatography/mass spectrometry

The detection and identification of degradation products of scheduled chemicals, which are characteristic markers of Chemical Warfare agents (CWAs), plays a key role in verification analysis. Identification of such non-scheduled but specific markers of CWAs helps in deciphering the kind of agent that was present in the sample submitted for off-site analysis. This paper describes the stability of N,N-dialkylaminoethyl-2-chlorides, which are precursors for highly toxic chemicals like VX, in different solvents. These compounds are stable in chloroform, acetonitrile, hexane and dichloromethane but tend to undergo in situ nucleophilic substitution reaction in the presence of alcohols giving the corresponding alkyl ether. The study shows that N,N-dialkylaminoethyl alkyl ethers can be used as markers of N,N-dialkylaminoethyl-2-chlorides. A detailed degradation study of these compounds in the presence of alcohols was carried out and it was found that the reaction follows pseudo-first order kinetics. Electron ionization mass spectral data for the methyl ethers of all the compounds are briefly discussed.