Synthesis and Crystal Structure of Lithium Tetrametaphosphimate Tetrahydrate Li4(PO2NH)4 · 4 H2O

Single crystals of Li₄(PO₂NH)₄ · 4 H₂O were obtained by dissolving LiOH and H₄(PO₂NH)₄ · 2 H₂O in water and subsequent precipitation with acetone and ethanol followed by slow evaporation of the solvents. The structure of Li₄(PO₂NH)₄ · 4 H₂O was solved by single‐crystal X‐ray methods ( (No. 2), a = 489.2(2), b = 853.2(2), c = 880.5(2) pm, α = 101.71(3), β = 102.39(3), γ = 94.88(3)°, Z = 1). The structure is composed of LiO₄ tetrahedra and (PO₂NH)₄^4? ions. The P₄N₄ rings of the anions exhibit a slightly distorted chair–1 conformation, which is supported by IR data and has been described by torsion angles, displacement asymmetry parameters and puckering parameters. Via Li⁺ ions and hydrogen bonds, the tetrametaphosphimate anions are connected forming a three‐dimensional network.     

Enumeration procedure for monitoring test microbe populations on inoculated carriers in AOAC use-dilution methods

The AOAC Use-Dilution methods do not provide procedures to enumerate the test microbe on stainless steel carriers (penicylinders) or guidance on the expected target populations of the test microbe (i.e., a performance standard). This report describes the procedures used by the U.S. Environmental Protection Agency to enumerate the test microbe (carrier counts) associated with conducting the Use-Dilution method with Staphylococcus aureus (Method 955.15) and Pseudomonas aeruginosa (Method 964.02) and the examination of historical data. The carrier count procedure involves the random selection of carriers, shearing bacterial cells from the carrier surface through sonication, and plating of serially diluted inoculum on trypticase soy agar. For each Use-Dilution test conducted, the official AOAC method was strictly followed for carrier preparation, culture initiation, test culture preparation, and carrier inoculation steps. Carrier count data from 78 Use-Dilution tests conducted over a 6-year period were compiled and analyzed. A mean carrier count of 6.6 logs (approximately 4.0 x 10(6) colony-forming units/carrier) was calculated for both S. aureus and P. aeruginosa. Of the mean values, 95% fell within +/- 2 repeatability standard deviations. The enumeration procedure and target carrier counts are desirable for standardizing the Use-Dilution methods, increasing their reproducibility, and ensuring the quality of the data.     

Experimental and modeling studies of B atom number density distributions in hot filament activated B2H6/H2 and B2H6/CH4/H2 gas mixtures

Experimental and modeling studies of the gas-phase chemistry occurring in dilute, hot filament (HF) activated B2H6/H2 and B2H6/CH4/H2 gas mixtures are reported. Spatially resolved relative number densities of B (and H) atoms have been measured by resonance enhanced multiphoton ionization methods, as a function of process conditions (e.g. the HF material and its temperature, the B2H6/H2 mixing ratio, and the presence (or not) of added CH4). Three-dimensional modeling of the H/B chemistry prevailing in such HF activated gas mixtures using a simplified representation of the gas phase chemistry succeeds in reproducing all of the experimentally observed trends, and in illustrating the key role of the "H-shifting" reactions BHx + H <= => BHx-1 + H2 (x = 1-3) in enabling rapid interconversion between the various BHx (x = 0-3) species. CH4 addition, at partial pressures appropriate for growth of boron-doped diamond by chemical vapor deposition methods, leads to approximately 30% reduction in the measured B atom signal near the HF. The modeling suggests that this is mainly due to concomitant H atom depletion near the HF, but it also allows us a first assessment of the possible contributions from B/C coupling reactions upon CH4 addition to HF activated B2H6/H2 gas mixtures.     

Preparation of 4-hydroxy-3-substituted, 2H-1-benzopyran-2-ones and 2H-1-benzothiopyran-2-ones from carboxylic esters and methyl salicylates or methyl thiosalicylate

C(α)-Carboxylic acid esters were treated with excess lithium diisopropylamide, condensed with methyl salicylates or methyl thiosalicylate, followed by acid cyclization to either 4-hydroxy-3-substituted, 2H-1-benzopyran-2-ones (coumarins), or 2H-1-benzothiopyran-2-ones (thiocoumarins).     

Development and application of an ultratrace method for speciation of organotin compounds in cryogenically archived and homogenized biological materials

An accurate, ultra-sensitive and robust method for speciation of mono, di, and tributyltin (MBT, DBT, and TBT) by speciated isotope-dilution gas chromatography-inductively coupled plasma-mass spectrometry (SID-GC-ICPMS) has been developed for quantification of butyltin concentrations in cryogenic biological materials maintained in an uninterrupted cryo-chain from storage conditions through homogenization and bottling. The method significantly reduces the detection limits, to the low pg g(-1) level (as Sn), and was validated by using the European reference material (ERM) CE477, mussel tissue, produced by the Institute for Reference Materials and Measurements. It was applied to three different cryogenic biological materials-a fresh-frozen mussel tissue (SRM 1974b) together with complex materials, a protein-rich material (whale liver control material, QC03LH03), and a lipid-rich material (whale blubber, SRM 1945) containing up to 72% lipids. The commutability between frozen and freeze-dried materials with regard to spike equilibration/interaction, extraction efficiency, and the absence of detectable transformations was carefully investigated by applying complementary methods and by varying extraction conditions and spiking strategies. The inter-method results enabled assignment of reference concentrations of butyltins in cryogenic SRMs and control materials for the first time. The reference concentrations of MBT, DBT, and TBT in SRM 1974b were 0.92 +/- 0.06, 2.7 +/- 0.4, and 6.58 +/- 0.19 ng g(-1) as Sn (wet-mass), respectively; in SRM 1945 they were 0.38 +/- 0.06, 1.19 +/- 0.26, and 3.55 +/- 0.44 ng g(-1), respectively, as Sn (wet-mass). In QC03LH03, DBT and TBT concentrations were 30.0 +/- 2.7 and 2.26 +/- 0.38 ng g(-1) as Sn (wet-mass). The concentration range of butyltins in these materials is one to three orders of magnitude lower than in ERM CE477. This study demonstrated that cryogenically processed and stored biological materials are a promising alternative to conventional freeze-dried materials for organotin speciation analysis, because these are, at present, the best conditions for minimizing degradation of thermolabile species and for long-term archival. Finally, the potential of the analytical method was illustrated by analysis of polar bear (Ursus maritimus) and beluga whale (Delphinapterus leuca) liver samples that had been collected in the Arctic and archived at the Marine Environmental Specimen Bank. Significant concentrations of butyltin compounds were found in the samples and provide the first evidence of the presence of this class of contaminant in the Arctic marine ecosystem. Figure Eye catch image.     

Bond dissociation energies and radical stabilization energies associated with model peptide-backbone radicals

Bond dissociation energies (BDEs) and radical stabilization energies (RSEs) have been calculated for a series of models that represent a glycine-containing peptide-backbone. High-level methods that have been used include W1, CBS-QB3, U-CBS-QB3, and G3X(MP2)-RAD. Simpler methods used include MP2, B3-LYP, BMK, and MPWB1K in association with the 6-311+G(3df,2p) basis set. We find that the high-level methods produce BDEs and RSEs that are in good agreement with one another. Of the simpler methods, RBMK and RMPWB1K achieve good accuracy for BDEs and RSEs for all the species that were examined. For monosubstituted carbon-centered radicals, we find that the stabilizing effect (as measured by RSEs) of carbonyl substituents (CX=O) ranges from 24.7 to 36.9 kJ mol(-1), with the largest stabilization occurring for the CH=O group. Amino groups (NHY) also stabilize a monosubstituted alpha-carbon radical, with the calculated RSEs ranging from 44.5 to 49.5 kJ mol(-1), the largest stabilization occurring for the NH2 group. In combination, NHY and CX=O substituents on a disubstituted carbon-centered radical produce a large stabilizing effect ranging from 82.0 to 125.8 kJ mol(-1). This translates to a captodative (synergistic) stabilization of 12.8 to 39.4 kJ mol(-1). For monosubstituted nitrogen-centered radicals, we find that the stabilizing effect of methyl and related (CH2Z) substituents ranges from 25.9 to 31.7 kJ mol(-1), the largest stabilization occurring for the CH3 group. Carbonyl substituents (CX=O) destabilize a nitrogen-centered radical relative to the corresponding closed-shell molecule, with the calculated RSEs ranging from -30.8 to -22.3 kJ mol(-1), the largest destabilization occurring for the CH=O group. In combination, CH2Z and CX=O substituents at a nitrogen radical center produce a destabilizing effect ranging from -19.0 to -0.2 kJ mol(-1). This translates to an additional destabilization associated with disubstitution of -18.6 to -7.8 kJ mol(-1).     

Adding water to sugar: a spectroscopic and computational study of alpha- and beta-phenylxyloside in the gas phase

The gas phase structures of phenyl alpha- and beta-d-xylopyranoside (alpha- and beta-pXyl) and their mono-hydrates have been investigated using a combination of resonant two-photon ionization (R2PI), ultra-violet hole-burning and resonant infrared ion dip spectroscopy, coupled with density functional theory (DFT) and ab initio computation. The hole-burning experiments indicate the population of a single conformer only, in each of the two anomers. Their experimental and calculated infrared spectra are both consistent with a conformational assignment corresponding to the computed global minimum configuration. All three OH groups are oriented towards the oxygen atom (O1) on the anomeric carbon atom to form an all trans(ttt) counter-clockwise chain of hydrogen bonds. The mono-hydrates, alpha- and beta-pXyl(H(2)O) each populate two distinct structures in the molecular beam environment, with the water molecule inserted between OH4 and OH3 or between OH3 and OH2 in alpha-pXyl(H2O), and between OH2 and O1 in either of two alternative orientations, in beta-pXyl(H2O). In all of the mono-hydrated xyloside complexes, the water molecule inserts into the weakest link of the sugar molecules' hydrogen-bonded chain of hydroxy groups, creating a single extended chain, strengthened by co-operativity. The all-trans configuration of the xylose moiety is retained and the mono-hydrate structures correspond to those calculated to lie at the lowest relative energies.     

Rhodium catalysed tandem conjugate addition-protonation: an enantioselective synthesis of 2-substituted succinic esters

The rhodium catalysed addition of potassium trifluoro(organo)borates to dimethyl itaconate generates an intermediate complex which on protonation provides enantioenriched succinic esters.     

International Intercomparison of Solar UVR Spectral Measurement Systems in Melbourne in 2013

Monitoring ambient solar UVR levels provides information on how much there is in both real time and historically. Quality assurance of ambient measurements of solar UVR is critical to ensuring accuracy and stability and this can be achieved by regular intercomparisons of spectral measurement systems with those of other organizations. In October and November of 2013 a solar UVR spectroradiometer from Public Health England (PHE) was brought to Melbourne for a campaign of intercomparisons with a new Bentham spectrometer of Australian Radiation Protection and Nuclear Safety Agency (ARPANSA) and one at the Australian Bureau of Meteorology (BOM), supported by New Zealand's National Institute for Water and Atmosphere (NIWA). Given all three spectroradiometers have calibrations that are traceable to various national standards, the intercomparison provides a chance to determine measurement uncertainties and traceability that support UV measurement networks in Australia, New Zealand and the UK. UV Index measurements from all three systems were compared and ratios determined for clear sky conditions when the scans from each instrument were within 2 min of each other. While wavelengths below 305 nm showed substantial differences between the PHE unit and the two other systems, overall the intercomparison results were encouraging, with mean differences in measured UV Index between the BOM/NIWA and those of PHE and ARPANSA of <0.1% and 7.5%, respectively.