Transient electrophoresis of a charged porous particle

The starting electrophoretic motion of a porous, uniformly charged, spherical particle, which models a solvent-permeable and ion-penetrable polyelectrolyte coil or floc of nanoparticles, in an arbitrary electrolyte solution due to the sudden application of an electric field is studied for the first time. The unsteady Stokes/Brinkman equations with the electric force term governing the fluid velocity fields are solved by means of the Laplace transform. An analytical formula for the electrophoretic mobility of the porous sphere is obtained as a function of the dimensionless parameters , , , and , where a is the radius of the particle, κ is the Debye screening parameter, λ is the reciprocal of the square root of the fluid permeability in the particle, ρ_p and ρ are the mass densities of the particle and fluid, respectively, ν is the kinematic viscosity of the fluid, and t is the time. The electrophoretic mobility normalized by its steady-state value increases monotonically with increases in and , but decreases monotonically with an increase in , keeping the other parameters unchanged. In general, a porous particle with a high fluid permeability trails behind an identical porous particle with a lower permeability and a corresponding hard particle in the growth of the normalized electrophoretic mobility The normalized electrophoretic acceleration of the porous sphere decreases monotonically with an increase in the time and increases with an increase in from zero at .     

Aggregation-driven growth of size-tunable organic nanoparticles using electronically altered conjugated polymers

A novel class of monodisperse conjugated polymer nanoparticles have been readily prepared by the facile reprecipitation of poly{1,3-bis[2-(3-alkylthienyl)]azulene} or poly{1,3-bis[2-(3-alkoxythienyl)]azulene}. The multicomponent poly(bithiophene-alt-azulene) macromolecules were efficiently self-assembled into a wide range of size-tunable nanoparticles from a few tens to five hundred nanometers via the hydrophobic and pi-stacking effects in the mixed chloroform/methanol solutions. Electronically altered polymer structures with different alkyl or alkoxy substitutes exhibited variable self-assembling behaviors to precisely tune the size and the optical/electronic properties of nanoparticles. A strong size dependence of continuous bathochromic absorption and significant enhanced emission were observed with the increase of particle size. A linear relationship between the absorption or fluorescence intensities and the particle size was demonstrated as well, and this is very useful to probe the intermolecular interactions and the size evolutions of conjugated polymer nanoparticles. After the size-dependent optical and electronic properties are created, they can be further optimized to improve the performance of materials prior to the use in novel organic nanodevices in a cost-effective way.     

Speciation analysis of chromium by separation on a 5-palmitoyl oxine-functionalized XAD-2 resin and spectrophotometric determination with diphenylcarbazide

The method developed in this work for the separation and preconcentration of Cr(III) is based on its retention by an Amberlite XAD-2 copolymer resin functionalized with 5-palmitoyl-8-hydroxyquinoline (oxine), abbreviated XAD-POx, with the ligand covalently bound to the copolymer. Cr(III) sorption was quantitative within the pH range 4.5–7.0 and Cr(VI) was not retained. The Cr(III) held by the resin column was eluted with a hot solution of H₂O₂ in pH9.0 aqueous NH₃–NH₄Cl buffer, and Cr oxidized to CrO₄^2– was rejected by the chelating cation-exchanger column. Any Cr(VI) originally present with Cr(III) could be reduced with an acidic solution of H₂O₂, and retained by the column yielding total Cr results, Cr(VI) being determined from the difference. The resin showed a maximal preconcentration factor of 60 for Cr(III), the LOD and LOQ being 9.3 and 30.1 nmol L^–1, respectively. The developed preconcentration-speciation analysis was finished with a diphenylcarbazide (DPC) spectrophotometric procedure suitable for conventional laboratories. The resin showed excellent salt tolerance, enabling Cr analysis in seawater, and was stable over extended use. All the interferents of this procedure that normally occur in an electroplating effluent, a blended coal CRM, and a standard steel sample could be removed by the recommended procedure, by use of partial and total selectivity at the adsorption and desorption stages, respectively, enabling preconcentration and colorimetric determination of chromium in various complex matrices.     

The binding ability of iron bonded to porphodimethene: structural, magnetic, and electronic relationship to iron porphyrin complexes

The availability of the parent compound, meso-hexaethylporphodimetheneiron(II), [(Et6N4)Fe] (2), of this report results from a novel synthetic methodology that makes [Et6N4Li2] (1) easily available. The major focus is on how the axial positions, which are the key reactive sites in metalloporphyrins, and the electronic configuration of the metal can be affected by the breakdown of the aromaticity of the porphyrin skeleton and by the nonplanar conformation of the ligand. DFT calculations indicate a 3B1(dz2)1(dyz)1 ground state for 2 versus the 3A2(dxz)1(dyz)1 ground state in the porphyrin analogue. The intermediate-spin state (S = 1) of 2 changed drastically upon addition of one or two axial ligands, as hexacoordination is preferred by iron(II). The hexacoordinate complexes [(Et6N4)Fe(L)(L')] (L = L' = THF, 3; L = L' = Py, 4; L = PhNO, L' = Py, 14) have been isolated and structurally characterized. Strong-field ligands lead to a low-spin diamagnetic state for iron(II), namely for complexes 4-7, 9, and 14, whereas 3 is a typical d6 high-spin complex, as is the pentacoordinate [(Et6N4)Fe(CN)]Bu4N (8). The structural analysis showed common features for 6, 7, 9, and 14: i) a small displacement of the metal from the N4 plane, and ii) an N4 cavity, larger than that in the corresponding porphyrins, affecting the Fe-N bond lengths. The 1H NMR spectrum is quite diagnostic of the two-fold symmetry in the diamagnetic hexacoordinate complexes, revealing either a D2h or a C2v symmetry. The CO stretching frequency (1951 cm(-1)) in complex 6 probes the good electron density at the metal. The one-electron oxidation of 2 led to pentacoordinate iron(III) derivatives [(Et6N4)Fe(Cl)] (10), [(Et6N4)2Fe2(mu-O)] (11), and [(Et6N4)2Fe2(mu-p-OC6H4-O)] (12). Complex 10 is a typical high-spin iron(III) (5.85muB at 298 K), while 11 and 12 behave as antiferromagnetic coupled iron(III) (J = -9.4cm(-1), 12, and J = -115cm(-1), 11). In complexes 10, 11, and 12 iron is sitting in a quite distorted square pyramidal geometry, in which the ligand displays a very distorted roof conformation with different degrees of ruffling. Distinctive structural and magnetic features have been found for the nitrosyl derivative [(Et6N4)Fe-NO], which has a low-spin state (S = 1/2) and the following structural parameters: Fe-N-O, 147.3(2) degrees; Fe-N, 1.708(2) A; N-O, 1.172(3) A. A comparative structural, magnetic, and theoretical analysis of the compounds listed above has been made with the analogous porphyrin derivatives. The detailed structural investigation has been mapped through the X-ray analysis of 2, 7, 8, 9, 11, 13, and 14.     

Reactions of RSe− (R = Me,Ph) Groups in [RSeFe(CO)4I and [RSeCr(CO)5−]

The anionic [MeSeFe(CO)₄] and [MeSeCr(CO)₅] complexes were synthesized by reaction of [PPN][HFe(CO)₄] and [PPN][HCr(CO)₅] with MeSeSeMe respectively via nucleophilic cleavage of the Se-Se bond. The ease of cleavage of the Se-Se bond follows the nucleophilic strength of metal-hydride complexes. Methylation of [RSeCr(CO)₅^?] by the soft alkylating agent MeI resulted in the formation of neutral (MeSeMe)Cr(CO)₅ in THF at 0°C. In contrast, the [ICr(CO)₅^?] was isolated at ambient temperature. Reaction of [MeSeFe(CO)₄^?] or [MeSeCr(CO)₅^?] with HBF₄ yielded (CO)₃Fc(μ-SeMe)₂Fe(CO)₃ dimer and anionic [(CO )₅Cr (μ-SeMe)Cr(CO)₅^?] respectively, and no neutral (HSeMe)Fe(CO)₄ and (HSeMe)Cr(CO)₅ were detected spectrally (IR) even at low temperature. Reaction of NOBF₄ or [Ph₃C][BF₄] and [MeSeCr(CO)₅^?] resulted in the neutral monodentate (MeSeSeMe)Cr(CO)₅ complex. Addition of 1 equiv CpFe(CO)₂I to 2 equiv [MeSeCr(CO)₅^?] gave CpFe(CO)₂(SeMe) and the anionic [(CO)₅Cr(μ-SeMe)Cr(CO)₅^?] in THF at ambient temperature.     

Oxidation-Induced Structural Alterations and Its Effect on Chaperone Function of Rat Lens α-Crystallin

An ascorbate-FeCl₃-EDTA-H₂O₂ system was used to oxidize rat lens α-crystallins. Under this oxidative insult, the chaperone activity of α-crystallin toward γ-crystallin was shown to decrease significantly, which is quite different from the result reported by Wang and Spector. (Invest. Ophthalmol. Vis. Sci. 1995 , 36, 311-321.) Fluorescence spectroscopy and circular dichroism were employed to characterize the structural changes of oxidized α-crystallin. It was found that fluorescence intensity of l-anilinonaphthalene-8-sul-phonate (ANS) bound to oxidized α-crystallin increased comparing to that bound to normal α-crystallin, suggesting oxidation causes the exposure of more hydrophobic regions. Further, α-crystallin's fluorescence intensity in response to tryptophan residues showed a pseudo first order decline. Amino acid analysis of normal versus oxidized α-crystallin confirmed actual decline in tryptophan levels, showing about 80% of tryptophan being modified after 10-hour oxidation. Circular dichroism showed both changes in the secondary and tertiary structures of oxidized α-crystallin, characterized by a large loss of aromatic-type amino acid interactions and a large loss of β-sheet structure. In conclusion, modified tryptophan, secondary and tertiary structural changes of α-crystallin correlate best with the reduction of chaperone function, the curves all showing a linear slope for 10 hours, then plateauing. These results indicate that the decrease of α-crystallin chaperone activity is attributed to the structural changes.     

Ferromagnetic NiII-GdIII interactions in complexes with NiGd, NiGdNi, and NiGdGdNi cores supported by tripodal ligands

Dinuclear [(NiL)Gd(hfac)(2)(EtOH)](H(3)L = 1,1,1-tris(N-salicylideneaminomethyl)ethane, Hhfac = hexafluoroacetylacetone), trinuclear [(NiL)(2)Gd(NO(3))], and tetranuclear [(NiL)Gd(CH(3)CO(2))(2)(MeOH)](2) complexes, were prepared by treating [Ni(HL)] with [Gd(hfac)(3)(H(2)O)(2)], Gd(NO(3))(3).6H(2)O, and Gd(CH(3)CO(2))(3).4H(2)O, respectively, in the presence of Et(3)N. All the complexes show that ferromagnetic interactions occur between the Ni(II) and Gd(III) ions.     

Determination of phenolic compounds using high-performance liquid chromatography with Ce-Tween 20 chemiluminescence detection

A novel method for the simultaneous determination of phenolic compounds such as salicylic acid, resorcinol, phloroglucinol, p-hydroxybenzoic acid, 2,4-dihydroxybenzoic acid, and m-nitrophenol by high-performance liquid chromatography (HPLC) coupled with chemiluminescence (CL) detection was developed. The procedure was based on the chemiluminescent enhancement by phenolic compounds of the cerium(IV)-Tween 20 system in a sulfuric acid medium. The separation was carried out with an isocratic elution or with a gradient elution using a mixture of methanol and 1.5% acetic acid. For six phenolic compounds, the detection limits (3σ) were in the range 1.40-5.02 ng/ml and the relative standard deviations (n=11) for the determination of 0.1 μg/ml compounds were in the range 1.9-2.9%. The CL reaction was well compatible with the mobile phase of HPLC, no baseline drift often occurred in HPLC-CL detection was observed with a gradient elution. The method has been successfully applied to the determination of salicylic acid and resorcinol in Dermatitis Clear Tincture and p-hydroxybenzoic acid in apple juices.     

Complexation of silver and co-recovered metals with novel aza-crown ether macrocycles by electrospray ionization mass spectrometry

Electrospray ionization mass spectrometry (ESI-MS) is used to evaluate the metal binding selectivities of an array of novel caged macrocycles for silver, gold, copper, nickel, zinc, iron, lead, manganese and alkali metal ions. It is found that five of the new compounds display silver selectivity, and their relative affinities for various metals depend on the type, number, and arrangement of heteroatoms (N, O), the cavity size, and the presence of aromatic substituents. Alkali metal cation binding studies are used to evaluate the size-selectivities of the cavities of the macrocycles. Electronic structure calculation by B3LYP density function theory methods were used to model the metal complexes. The presence of nitrogen atoms in the macrocyclic ring is essential for silver selectivity over other transition metals and alkali metal ions, and the presence of aromatic groups also enhances silver avidity. Macrocycle 3, a triaza-18-crown-6 analog modified with two phenyl groups and a cage group, is capable of selective extraction of Ag+ from aqueous solutions in the presence of other transition metal ions and the most common alkali and alkaline earth metal ions.