Activation of trimethylsilyl cyanide by potassium phthalimide for facile synthesis of TMS-protected cyanohydrins

Potassium phthalimide was found to be a highly effective and easily accessible organocatalyst for the cyanosilylation of various carbonyl compounds under extremely mild conditions. The corresponding cyanohydrin trimethylsilyl ethers were obtained in high to quantitative yields in solvent-free conditions at room temperature using 2.5 mol% catalyst loading.     

Application of H-point standard addition method and partial least squares to the simultaneous kinetic-potentiometric determination of hydrazine and phenylhydrazine

Simultaneous determination of hydrazine (HZ) and phenylhydrazine (PHZ) by H-point standard addition method (HPSAM) and partial least squares (PLS) regression was carried out based on kinetic data from novel potentiometry methods. The rate of chloride ion production in the reaction of HZ and PHZ with N-chlorosuccinimide (NCS) was monitored by a chloride ion-selective electrode. The experimental data show the good ability of ion-selective electrodes (ISEs) as detectors not only for the direct determination of chloride ion but also for simultaneous kinetic-potentiometric analysis using HPSAM and PLS methods. The methods are based on the differences observed in the production rate of chloride ions. The results show that simultaneous determination of HZ and PHZ can be performed in concentration ranges of 0.5 - 20.0 and 0.8 - 25.0 microg mL(-1), respectively. The total relative standard error for applying the PLS method to 8 synthetic samples in the concentration ranges of 1.0 - 16.0 microg mL(-1) for HZ and 2.0 - 16.0 microg mL(-1) for PHZ was 3.96. In order for the selectivity of the method to be assessed, we evaluated the effects of certain foreign ions upon the reaction rate and assessed the selectivity of the method. Both methods (PLS and HPSAM) were evaluated using a set of synthetic sample mixtures and then applied for simultaneous determination of HZ and PHZ in water samples.     

Unexpected regio- and stereoselective [4 + 3] cycloaddition reaction of azomethine ylides with benzylidene thiazolidinediones: synthesis of pharmacologically active spiroindoline oxazepine derivatives and theoretical study

Molecular Diversity - An unexpected regio- and stereoselective [4?+?3] cycloaddition reaction of azomethine ylides with 5-benzylidenethiazolidine-2,4-diones has been successfully...     

Preconcentration and spectrophotometric determination of low concentrations of malachite green and leuco-malachite green in water samples by high performance solid phase extraction using maghemite nanoparticles

A novel and sensitive extraction procedure using maghemite nanoparticles (γ-Fe₂O₃) modified with sodium dodecyl sulfate (SDS), as an efficient solid phase, was developed for removal, preconcentration and spectrophotometric determination of trace amounts of malachite green (MG) and leuco-malachite green (LMG). Combination of nanoparticle adsorption and easily magnetic separation was used to extraction and desorption of MG and LMG. The adsorption capacity was evaluated using both the Langmuir and Freundlich adsorption isotherm models. Maghemite nanoparticles were prepared by co-precipitation method and their surfaces were modified by SDS. The size and properties of the produced maghemite nanoparticles was determined by X-ray diffraction (XRD) analysis, scanning electron microscopy (SEM) and BET analysis. MG and LMG became adsorbed at pH 3.0. LMG was oxidized to MG by adsorption on maghemite nanoparticles. The adsorbed MG was then desorbed and determined spectrophotometrically. The calibration graph was linear in the range 0.50-250.00 ng mL⁻¹ of MG and LMG with a correlation coefficient of 0.9991. The detection limit of the method for determination of MG was 0.28 ng mL⁻¹ and the relative standard deviation (R.S.D.) for 10.00 and 50.00 ng mL⁻¹ of malachite green was 1.60% (n = 3) and 0.86% (n = 5), respectively. A preconcentration factor of 50 was achieved in this method. The Langmuir adsorption capacity (q_max) was found to be 227.3 mg g⁻¹ of the adsorbent. The method was applied to the determination of MG in fish farming water samples.     

Electrochemical Characterization of Gold 6‐Amino‐2‐mercaptobenzothiazole Self‐Assembled Monolayer for Dopamine Detection in Pharmaceutical Samples

A new sensor, gold‐6‐amino‐2‐mercaptobenzothiazole (6A2MBT), was fabricated via a self‐assembly procedure. Electrochemical properties of the monolayer were investigated by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The modified electrode showed excellent antifouling property against the oxidation products of DA, allowed us to construct a dynamic calibration curve with two linear parts, 1.00×10^?6 to 3.72×10^?4 and 3.72×10^?4 to 6.42×10^?4 M DA, with correlation coefficients of 0.997 and 0.992 and a detection limit of 1.57×10^?7 M DA by using differential pulse voltammetry (DPV), respectively. Finally, the performance of the Au‐6A2MBT modified electrode was successfully tested for electrochemical detection of DA in a pharmaceutical sample.     

A mild, clean, and simple synthesis of symmetrical carboxylic anhydrides from carboxylic acides using a polymer supported tosyl chloride

The use of polymeric reagents simplifies routine acylation of carboxylic acid because it eliminates the traditional purification. We describe the use of readily available cross-linked poly(4-vinylpyridine) supported tosyl chloride, [P₄VP].TsCl, in the suspended solution phase synthesis of symmetrical anhydrides from carboxylic acids in the presence of K₂CO₃ in high yields and purity. The products can be obtained by filtration and evaporation of the solvent.     

Linear and nonlinear intersubband optical absorption and refractive index changes of asymmetric double semi-parabolic quantum wells

The optical properties of the asymmetric double semi-parabolic quantum wells (DSPQWs) are investigated numerically for typical GaAs/Al_xGa_1−xAs. Optical properties are obtained using the compact density matrix approach. In this work, effects of the structure parameters such as the barrier width and the well widths on the optical properties of the asymmetric DSPQWs are investigated. The results show that the linear and nonlinear optical properties of asymmetric DSPQW are non-monotonic functions of these structure parameters. The behavior of the refractive index changes of asymmetric DSPQW with the variation of the barrier width is different substantially with that of symmetric DSPQW. Results reveal that the resonant peak values of the total absorption coefficient of asymmetric DSPQW is usually greater than that of symmetric DSPQW. Our calculations also show that the total absorption coefficient of asymmetric DSPQW is larger than that of asymmetric double square quantum well.     

A sunlight-induced method for rapid biosynthesis of silver nanoparticles using an <Emphasis Type="Italic">Andrachnea chordifolia</Emphasis> ethanol extract

In this study a sunlight-induced method for rapid synthesis of silver nanoparticles using an ethanol extract of Andrachnea chordifolia is described. The silver nitrate solutions (1 mM) containing the ethanol extract of Andrachnea chordifolia were irradiated by both sunlight radiation and by sunlight radiation passed through different colored filters (red, yellow or green). The smallest size of silver nanoparticles was obtained when a silver ion solution was irradiated for 5 minutes by direct sunlight radiation. Further examination of the shape and size and of the surface chemistry of these biogenic silver nanoparticles, which were prepared under sunlight radiation, was carried out using transmission electron microscopy and infrared spectroscopy, respectively. Transmission electron microscopy images show spherical particles with an average size of 3.4 nm. Hydroxyl residues were also detected on the surface of these biogenic silver nanoparticles fabricated using plant extract of Andrachnea chordifolia under sunlight radiation. Our study on the reduction of silver ions by this plant extract in darkness shows that the synthesis process can take place under dark conditions at much longer incubations (48 hours). Larger silver polydispersed nanoparticles ranging in size from 3 to 30 nm were obtained when the silver ions were treated with the ethanol extract of Andrachnea chordifolia under dark conditions for 48 hours.     

Proprietor and customer costs in the incomplete hub location-routing network topology

The hub location problem finds the location of hubs and allocates the other nodes to them. It is widely supposed the network created with the hub nodes is complete in the extensive literature. Relaxation of this basic supposition forms the present work. The model minimizes the cost of the proprietor, including the fixed costs of hubs, hub links and spoke links. Costs of hub and spoke links are contemplated as fixed cost or maintenance cost. Moreover, the model considers routing costs of customers who want to travel from origins to destinations. In this study, we offer a model to the multiple allocations of the hub location problems, under the incomplete hub location-routing network design. This model is easily transformed to other hub location problems using one or more constraints. No network format is dictated on the hub network. We suggest a set of valid inequalities for the formulation. Some lower bounds are developed using a Lagrangian relaxation approach and the valid inequalities. Computational analyses evaluate the performances of the lower bounding implementations and valid inequalities. Furthermore, we explore the effects of several factors on the design and solution time of the problem formulation.