Multiquadric approximation scheme on the numerical solution of delay differential systems of neutral type

In this paper, the aim is to present the multiquadric approximation scheme on the numerical solution of delay differential systems of neutral type. In presenting the process of the solution, the error estimation and run time of the method is introduced. We present the advantages of using the method and compare it with other methods. Comparing the numerical results obtained from the other methods, demonstrate the high accuracy and the efficiency of the proposed method. Also, we present some experiments in which numerical results show that the method works excellently, even where the data points are scattered. This indicates that the method is stable too.     

Spectrophotometric determination of rifampicin through chelate formation and charge transfer complexation in pharmaceutical preparation and biological fluids

Two simple and accurate spectrophotometric methods for determination of Rifampicin (RIF) are described. The first method is based on charge transfer (CT) complex formation of the drug with three pi-electron acceptors either 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ), 7,7,7,8-Tetracyanoquinodimethane (TCNQ) or 2,3,5,6-Tetrachloro-1,4-benzoquinone (p-chloranil) in acetonitrile. The method is followed spectrophotometrically by measuring the maximum absorbance at 584 nm, 761 nm (680 nm) or 560 nm for DDQ, TCNQ and p-chloranil, respectively. Under the optimized experimental conditions, the calibration curves showed a linear relationship over the concentration ranges of 5-140 microg/ml, 2-45 microg/ml (5-120 microg/ml) and 15-200 microg/ml, respectively. The second method is based on the reaction of RIF with iron(III) forming a water insoluble violet complex which is extracted into chloroform. The method determines RIF in concentration range of 10-240 microg/ml at 540 nm. The proposed methods applied to determination of RIF in capsule, human serum and urine samples with good accuracy and precision. The results were compared statistically with the official method and showed no significant different between the methods compared in terms of accuracy and precision.     

Turbulent structures in an optimal Taylor–Couette flow between concentric counter-rotating cylinders

The turbulent structures formed in a Taylor–Couette (TC) flow established between two concentric counter-rotating cylinders were explored numerically. The shear Reynolds number was set to Re_shear = 8000 and the radius ratio was set to r_i/r_o = 0.5. An optimal flow corresponding to the maximal angular velocity transport between the cylinders was selected for the TC flow. The mean velocity profile reached its steepest value near the cylinders in the optimal TC flow. The streamwise velocity correlations at the outer cylinder in the gap exceeded those at the inner cylinder. The large convective transport of angular velocity in the gap generated a maximal angular velocity flux to achieve the optimal flow. The angular velocity flux generated by the momentum source exceeded that generated by the momentum sink. The vorticity dispersion was larger near the inner cylinder than near the outer cylinder, but vorticity stretching near the outer cylinder exceeded than that near the inner cylinder. The skin friction coefficient budgets were plotted using the velocity–vorticity correlation. The vortex stretching contributions dominated the skin friction budgets. The area near the inner cylinder was populated by stronger vortices, but their population density was smaller than the population density of the vortices near the outer cylinder. The probability density functions of the wall-normal and streamwise velocity fluctuations delineated the presence of the large wall-normal velocity fluctuations near the outer cylinder.     

Exploring Tripartite Quantum Correlations: Entanglement Witness and Quantum Discord

In this study, we explore the tripartite quantum correlations by employing the quantum relative entropy as a distance measure. First, we evaluate the explicit expression for nonlinear entanglement witness (EW) of tripartite systems in the four dimensional space that lends itself to a straightforward algorithm for finding closest separable state (CSS) to the generic state. Then using nonlinear EW with specific feasible regions (FRs), quantum discord is derived analytically for the three-qubit and tripartite systems in the four dimensional space. Furthermore, we explicitly figure out the additivity relation of quantum correlations in tripartite systems.     

Construction of the Superposition of Displaced Fock States and Entangled Displaced Fock States

In this paper, at first we will construct the superposition of two displaced Fock states and two-mode entangled displaced Fock states mathematically by presenting theoretical methods. In these methods, we will introduce new operators using the parity and displacement operators. It will be observed that the superposition of two displaced Fock states and two-mode entangled displaced Fock states are constructed via the action of the introduced operators on one-mode and two-mode Fock states, respectively. Next, we will show that the presented methods have the potential ability to produce the superposition consist of more than two displaced Fock states and multi-mode entangled displaced Fock states, too.     

Deformed photon-added entangled squeezed vacuum and one-photon states: Entanglement,polarization, and nonclassical properties

In this paper, after a brief review on the entangled squeezed states, we produce a new class of the continuous-variabletype entangled states, namely, deformed photon-added entangled squeezed states. These states are obtained via the iterated action of the f-deformed creation operator A = f(n)aon the entangled squeezed states. In the continuation, by studying the criteria such as the degree of entanglement, quantum polarization as well as sub-Poissonian photon statistics, the twomode correlation function, one-mode and two-mode squeezing, we investigate the nonclassical behaviors of the introduced states in detail by choosing a particular f-deformation function. It is revealed that the above-mentioned physical properties can be affected and so may be tuned by justifying the excitation number, after choosing a nonlinearity function. Finally, to generate the introduced states, we propose a theoretical scheme using the nonlinear Jaynes–Cummings model.     

Synthesis and Cytotoxic Evaluation of Novel 1,2,3‐Triazole‐4‐Linked (2E,6E)‐2‐Benzylidene‐6‐(4‐nitrobenzylidene)cyclohexanones

This work describes the synthesis of novel 1,2,3‐triazole‐4‐linked (2E,6E)‐2‐benzylidene‐6‐(4‐nitrobenzylidene)cyclo‐hexanones starting from cyclohexanone. 1‐(Cyclohex‐1‐en‐1‐yl)piperidine, the enamine from cyclohexanone and piperidine, reacted with 4‐nitrobenzaldehyde to obtain 2‐(4‐nitrobenzylidene)cyclohexanone. Condensation of the latter compound with (prop‐2‐yn‐1‐yloxy)benzaldehyde derivatives under acidic conditions gave (4‐nitrobenzylidene)‐[(prop‐2‐yn‐1‐yloxy)‐benzylidene]cyclohexanones. Finally, ‘click reaction’ of these derivatives and various organic azides led to the title compounds. All compounds were examined by MTT assay for cytotoxic activity in one human breast cancer cell line, MDA‐MB‐231.     

Effects of self-fields on electron trajectory and gain in planar wiggler free-electron lasers with two-stream and ion-channel guiding

The effects of self-fields on electron trajectories and gain in planar wiggler free-electron lasers with two-stream and ion-channel guiding are investigated. An analysis of the two-stream quasi-steady-state electron trajectories is given by solving the equation of motion in the presence of ion-channel guiding and the planar wiggler. The electron trajectories and the gain are derived. The stability of the trajectories, the characteristics of the linear gain, and the normalized maximum gain are studied numerically. The numerical calculations show that there are eight group trajectories rather than the two groups reported in the absence of the self-fields. It is also shown that the normalized gain group seven （G7） decreases while the rest increases with the increase in normalized ion-channel frequency. The two-stream instability and the self-field lead to a decrease in the maximum gain, except for G7.     

Evaluation of essential oils for maintaining postharvest quality of Thompson seedless table grape

The effects of postharvest spraying of essential oils from sweet basil (Ocimum basilicum), fennel (Foeniculum vulgare), summer savory (Satureja hortensis) and thyme (Thymus vulgaris) on fungal decay and quality parameters of the 'Thompson seedless' table grape stored at 0?±?1°C for 60 days were evaluated. Results showed that the essential oils, especially of thyme and fennel, have a good inhibitory effect on the development of fungal decay in Thompson table grapes. In addition, essential oils reduced weight loss, berry and rachis browning and had no considerable adverse effect on the flavour of the fruits. GC-MS analysis showed that the main compounds identified in sweet basil, fennel, summer savory and thyme oils are linalool (65.25%), trans-anethole (64.72%), carvacrol (54.14%) and β-ocimene (12.62%), respectively. Therefore, these essential oils have good potential for use as an alternative to synthetic fungicides for the preservation and storage of table grapes.     

Strain field and extrusion load in ECAE process of bi-metal circular cross section

In this paper the previous velocity field proposed by the authors for the prediction of strain field and deformation load of circular cross section billet in ECAE process has been extended to take into account the deformation behavior of bimetal circular billet in the same process. Accordingly, using Bezier method, as a robust method for determining the geometry of the streamlines, the strain field developed in the circular bimetal billet is calculated. Then, based on the kinematically admissible velocity and strain fields and using the upper bound theorem the ECAE load is predicted. It was found that at constant inner corner angle of ECAE die, with decreasing of outer curve corner the inhemogenity of strain distribution is decreased and the ECAE force is increased. Also, at a constant outer curve corner, by decreasing the inner corner angle, the extrusion load is increased. A good agreement was found between the predicted and experimental results.