Pretransitional electro-optic response of 6CB liquid crystal in the isotropic phase

In this work, the electro-optic response of a 6CB liquid crystal layer is studied using a sensitive differential technique. The layer is held at a temperature just above the nematic to isotropic phase transition. Transverse magnetic (p) polarized light incident on the cell is coupled to guided modes in the liquid crystal layer using prism coupling. The modes manifest themselves as sharp dips in the reflectivity as the angle of incidence is scanned. When a low frequency sinusoidal voltage is applied to the cell, the resonant mode shapes and excitation angles are altered at a frequency which is twice that of the applied field, resulting in a modulation of the reflectivity for a given angle of incidence. By synchronous observation of the modulated signal, a differential signal is recorded. Comparing the data with modelling generated from multilayer optics theory, two effects are then quantified. The first of these is an induced birefringence, varying quadratically with applied voltage, which is well understood and can be expressed in terms of Landau-de Gennes theory. The second is a field induced perturbation in the imaginary part of the optical permittivity, δε_i, which implies a modification of the light scattering properties of the liquid crystal. The measurement of the latter effect is, as far as we know, a novel one, being only made possible by the remarkable sensitivity of the synchronous differential technique.     

Metal–Nitrosyl complexes as a source of new vasodilators: Strategies derived from systematic chemistry and nitrosyl ligand reactivity

A series of nitrosyl complexes of empirical formula K_n[M(CN)₅NO], where M = V, Cr, Mn and Co and n = 3, or M = Mo and n = 4, have been prepared which are notional analogues of the widely used vasodilator sodium nitroprusside. Their reactivity towards common nucleophiles (OH^?, NH₂R, NHR₂, HS^? and RS^?), acid and photolysis has been investigated to elucidate the desired properties required of new metal nitrosyls which may have some potential as new non-cyanide-based vasodilators.     

General base catalysis in the decomposition of N-Cl-Valine in aqueous solution

This article analyzes the kinetics of the decomposition of N-Cl-Valine in aqueous solution, which is formed rapidly by chlorination of Valine with sodium hypochlorite. A general-base catalyzed process not yet described is reported. The experimental evidence shows two competitive decomposition paths: an unimolecular concerted fragmentation process (k = (1.8 ± 0.1) · 10^?4 s^?1 at 298 K) and the other one is an E2 elimination process whose importance increases with pH and depends on the nature and the concentration of the bases present in the medium. © 1994 John Wiley & Sons, Inc.     

SOME GENERAL EFFECTS OF STRONG HIGH-FREQUENCY EXCITATION: STIFFENING, BIASING AND SMOOTHENING

Mechanical high-frequency (HF) excitation provides a working principle behind many industrial and natural applications and phenomena. This paper concerns three particular effects of HF excitation, that may change the apparent characteristics of mechanical systems: (1) stiffening, by which the apparent linear stiffness associated with an equilibrium is changed, along with derived quantities such as stability and natural frequencies; (2) biasing by which the system is biased towards a particular state, static or dynamic, which does not exist or is unstable in the absence of the HF excitation; and (3) smoothening, referring to a tendency for discontinuities to be effectively “smeared out” by HF excitation. Illustrating first these effects for a few specific systems, analytical results are provided that quantify them for a quite general class of mechanical systems. This class covers systems that can be modelled by a finite number of second order ordinary differential equations, generally non-linear, with periodically oscillating excitation terms of high frequency and small amplitude. The results should be useful for understanding the effects in question in a broader perspective than is possible with specific systems, for calculating effects for specific systems using well-defined formulas, and for possibly designing systems that display prescribed characteristics in the presence of HF excitation.     

LIDAR mapping of ozone-episode dynamics in Paris and intercomparison with spot analyzers Supplementary material available at http://link.springer.de/journals/apb

Continuous mapping of an ozone episode in Paris in June 1999 has been performed using a differential absorption lidar system. The 2D ozone concentration vertical maps recorded over 33 h at the Champ de Mars are compiled in a video clip that gives access to local photochemical dynamics with unprecedented precision. The lidar data are compared over the whole period with point monitors located at 0-, 50-, and 300-m altitudes on the Eiffel Tower. Very good agreement is found when spatial resolution, acquisition time, and required concentration accuracy are optimized. Sensitivity to these parameters for successful intercomparison in urban areas is discussed. Received: 11 February 2002 / Published online: 14 March 2002     

Physical aging of a polyetherimide: Creep and DSC measurements

Creep and differential scanning calorimetry (DSC) measurements have been used to study the physical aging behavior of a polyetherimide. Isothermal aging temperatures ranged from 160°C to T_g with aging times ranging from 10 min to 8 days. The only measurable effect of physical aging on the short-time creep curves is a shift of the creep compliance to longer times. Andrade plots of the compliance versus the cube root of time are linear at short times with the slope β decreasing with increasing aging time to a constant value once equilibrium is reached. Log β³ is related directly to the degree to which the creep curves shift to longer times with physical aging, and is used in this work as a measure of physical aging. A reduced curve of log β³ versus log aging time is obtained for the aging temperatures investigated by appropriate vertical and horizontal shifts. The enthalpy change during aging increases linearly with the logarithm of the aging time, t_a, leveling off at equilibrium at values which increase with decreasing aging temperature. Hence, both nonequilibrium and equilibrium temperature shift factors can be calculated from the DSC data. Good agreement is observed between the equilibrium temperature shift factors obtained from the creep and DSC data. The temperature dependence of the nonequilibrium temperature shift factors is found to be an order of magnitude smaller than that of the equilibrium shift factors. The time scales to reach equilibrium for enthalpy and for mechanical measurements are found to be the same within experimental error. © 1995 John Wiley & Sons, Inc.     

Distribution of melamine in polyester–melamine surface coatings cured under nonisothermal conditions

The influence of experimental cure parameters on the diffusion of reactive species in polyester–melamine thermoset coatings during curing has been investigated with X‐ray photoelectron spectroscopy and attenuated total reflectance Fourier transform infrared. The diffusion of melamine plays a vital role in the curing process and, therefore, in the ultimate properties of coatings. At a low (<20%) hexamethoxymethylmelamine (HMMM) crosslinker concentration, the matrix composition is uniform, but at high HMMM concentrations, excess HMMM rapidly segregates to the air–coating interface. The rate of migration is governed by the difference in the surface free energies of polyester and HMMM and the concentration gradient of HMMM between the bulk and the surface. An increased rate of energy absorption also increases the rate of migration of HMMM to the surface. A physical model has been proposed to explain this surface segregation phenomenon in terms of cocondensation and self‐condensation reactions. It suggests that an appropriate amount of melamine can be segregated on the surface and allowed to self‐condense to form a desired thickness of a melamine topcoat through the control of the binder composition and cure conditions. This technique can be implemented to apply a melamine topcoat during cure. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 83–91, 2004     

Feasibility Exploration of Laser‐based Techniques for Characterization of a Flashing Jet

Two‐phase flows hold an interest in many areas of science and engineering. In the safety field, one such topic is the accidental release of flammable and toxic pressure‐liquefied gases. In case of such a release, a flashing vapor explosion takes place resulting in a very dense two‐phase cloud. If the released substance is flammable, this cloud can be combustible and can lead to deflagration or detonation. For understanding the source processes of flashing and risk assessment, data related to cloud characteristics (i.e. droplet size, velocity etc.) is needed especially in the near region of the release. Due to the non‐equilibrium nature of the near field regions accurate data measurement is not possible with intrusive techniques. Therefore, laser‐based optical techniques (like Particle Image Velocimetry (PIV), Particle Tracking Velocimetry and Sizing (PTVS), Phase Doppler Anemometry (PDA) etc.) present the only possibility to obtain information for particle diameter and velocity evolution in this harsh environment.