Rhodathiaboranes with `anomalous' electron counts: synthesis, structure and reactivity

Analysis of the structures of 8,8-(PPh₃)₂-8,7-nido-RhSB₉H₁₀ and 9,9-(PPh₃)₂-9,7,8-nido-RhC₂B₈H₁₁ by RMS misfit calculations has confirmed that these rhodaheteroboranes possess nido 11-vertex cluster geometries in apparent contravention of Wade's rules. However, examination of the molecular structures of both species shows that the {RhP₂} planes are inclined by ca. 66° with respect to the metal-bonded SB₃ or CB₃ faces, and that two weak ortho-CHRh agostic interactions occupy the vacant co-ordination position thereby created. As a consequence of these agostic bonds the Rh atom, and hence the overall cluster, is provided with an additional electron pair, meaning that their nido structures are now fully consistent with Wade's rules. The chelated diphosphine compound 8,8-(dppe)-8,7-nido-RhSB₉H₁₀ is similar to the PPh₃ compound in showing the same agostic bonding. Attempts to prepare a bis-P(OMe)₃ analogue result in ligand scavenging and the formation of 8,8,8-{P(OMe)₃}₃-8,7-nido-RhSB₉H₁₀. Similarly, reaction between Cs[6-arachno-SB₉H₁₂] and RhCl(dmpe)CO does not result in CO loss but in formation of 8,8-(dmpe)-8-(CO)-8,7-nido-RhSB₉H₁₀, shown to exist as a mixture of two of three possible rotamers. Deprotonation of 8,8-(PPh₃)₂-8,7-nido-RhSB₉H₁₀ and 8,8-(dppe)-8,7-nido-RhSB₉H₁₀ with MeLi yields the anions [1,1-(PPh₃)₂-1,2-closo-RhSB₉H₉]⁻ and [1,1-dppe-1,2-closo-RhSB₉H₉]⁻, respectively, with octadecahedral cage structures. It is argued that anion formation causes the agostic bonding to be `switched-off' and results in the cluster adopting the closo architecture predicted by Wade's rules. This structural change is fully reversible on reprotonation, and if reprotonation of [1,1-(dppe)-1,2-closo-RhSB₉H₉]⁻ is carried out in MeCN, the product 8,8-(dppe)-8-(MeCN)-8,7-nido-RhSB₉H₁₀ forms. Interestingly, 8,8-(dppe)-8-(MeCN)-8,7-nido-RhSB₉H₁₀ reconverts to 8,8-(dppe)-8,7-nido-RhSB₉H₁₀ on standing in CDCl₃, suggesting that the agostic bonding is sufficiently strong to displace co-ordinated MeCN. All new compounds are fully characterised by multinuclear NMR spectroscopy and, in many cases, by single crystal X-ray diffraction.     

Automated data reduction for hydrogen/deuterium exchange experiments,enabled by high-resolution fourier transform ion cyclotron resonance mass spectrometry

Mass analysis of proteolytic fragment peptides following hydrogen/deuterium exchange offers a general measure of solvent accessibility/hydrogen bonding (and thus conformation) of solution-phase proteins and their complexes. The primary problem in such mass analyses is reliable and rapid assignment of mass spectral peaks to the correct charge state and degree of deuteration of each fragment peptide, in the presence of substantial overlap between isotopic distributions of target peptides, autolysis products, and other interferant species. Here, we show that at sufficiently high mass resolving power (m/Δm_50% ≥ 100,000), it becomes possible to resolve enough of those overlaps so that automated data reduction becomes possible, based on the actual elemental composition of each peptide without the need to deconvolve isotopic distributions. We demonstrate automated, rapid, reliable assignment of peptide masses from H/D exchange experiments, based on electrospray ionization FT-ICR mass spectra from H/D exchange of solution-phase myoglobin. Combined with previously demonstrated automated data acquisition for such experiments, the present data reduction algorithm enhances automation (and thus expands generality and applicability) for high-resolution mass spectrometry-based analysis of H/D exchange of solution-phase proteins.     

Quartz crystal microbalance with dissipation monitoring and surface plasmon resonance studies of carboxymethyl cellulose adsorption onto regenerated cellulose surfaces

Adsorption of anionic polyelectrolytes, sodium salts of carboxymethyl celluloses (CMCs) with different degrees of substitution (DS = 0.9 and 1.2), from aqueous electrolyte solutions onto regenerated cellulose surfaces was studied using quartz crystal microbalance with dissipation monitoring (QCM-D) and surface plasmon resonance (SPR) experiments. The influence of both calcium chloride (CaCl(2)) and sodium chloride (NaCl) on CMC adsorption was examined. The QCM-D results demonstrated that CaCl(2) (divalent cation) caused significantly greater CMC adsorption onto regenerated cellulose surfaces than NaCl (monovalent cation) at the same ionic strength. The CMC layers adsorbed onto regenerated cellulose surfaces from CaCl(2) solutions exhibited greater stability upon exposure to flowing water than layers adsorbed from NaCl solutions. Both QCM-D and SPR results showed that CMC adsorption onto regenerated cellulose surfaces from CaCl(2) solutions increased with increasing CaCl(2) concentration up to the solubility limit (10 mM). Voigt-based viscoelastic modeling of the QCM-D data indicated that the CMC layers adsorbed onto regenerated cellulose surfaces had shear viscosities of η(f) ≈ 10(-3) N·s·m(-2) and elastic shear moduli of μ(f) ≈ 10(5) N·m(-2). Furthermore, the combination of SPR spectroscopy and QCM-D showed that the CMC layers contained 90-95% water. Adsorption isotherms for CMCs in CaCl(2) solutions were also obtained from QCM-D and were fit by Freundlich isotherms. This study demonstrated that CMC adsorption from CaCl(2) solutions is useful for the modification of cellulose surfaces.     

Synthesis and characterization of diiron dithiolate complexes containing a quinoxaline bridge

A potential model complex for the hydrogenase active site, [Fe(2){(μ-CH(2)S)(2)R}(CO)(6)] (1) (R = quinoxaline), was synthesized by condensation of [(μ-LiS)(2)Fe(2)(CO)(6)] with 2,3-bis(bromomethyl)quinoxaline. Reactions of 1 with bis(diphenylphosphino)methane (dppm) under a range of conditions yielded substituted complexes [Fe(2){(μ-CH(2)S)(2)R}(CO)(5)(dppm)] (2), [Fe(2){(μ-CH(2)S)(2)R}(CO)(4)(k(2)-dppm)] (3) and [Fe(2){(μ-CH(2)S)(2)R}(CO)(4)(μ-dppm)] (4). X-ray crystallography confirms that in 2, the dppm is terminally bonded to an iron atom via one phosphorus atom, whereas in 3, it acts as a chelating ligand to coordinate to an iron center in a dibasal-substituted manner. In 4, the dppm bridges the two iron atoms in a cis basal/basal fashion with one phosphorus bonded to each iron atom. Treatment of 1 with various tertiary phosphines at room temperature in acetonitrile (MeCN) generates a range of mono-substituted products [Fe(2){(μ-CH(2)S)(2)R}(CO)(5)L] (5, L = PEt(3); 6, PMe(3); 7, PPh(3); 8, Me(2)PPh). With Bu(t)NC, mono- and di-substituted [Fe(2){(μ-CH(2)S)(2)R}(CO)(5)(Bu(t)NC)] (9) and [Fe(2){(μ-CH(2)S)(2)R}(CO)(4)(Bu(t)NC)(2)] (10) complexes are generated. All the complexes were characterized by elemental analysis, IR, MS and NMR spectroscopy. IR and NMR spectroscopic studies suggest that addition of excess HBF(4)·OEt(2) acid to 1-4 led to the protonation of quinoxaline nitrogen atoms. In contrast, 5-10 were not stable in acidic media. Electrochemistry of 1-4 was investigated in the acetonitrile medium (0.1 M Bu(4)NPF(6)). The electrochemical instability of the reduced ligand, quinoxaline, and the reduced forms of these complexes revealed from the electrochemical studies suggests that they do not provide ideal models of the hydrogenase active site.     

Theoretical investigation into competing unimolecular reactions encountered in the pyrolysis of acetamide

Motivated by the necessity to understand the pyrolysis of alkylated amines, unimolecular decomposition of acetamide is investigated herein as a model compound. Standard heats of formation, entropies, and heat capacities, are calculated for all products and transition structures using several accurate theoretical levels. The potential energy surface is mapped out for all possible channels encountered in the pyrolysis of acetamide. The formation of acetamedic acid and 1-aminoethenol and their subsequent decomposition pathways are found to afford the two most energetically favored pathways. However, RRKM analysis shows that the fate of acetamedic acid and 1-aminoethenol at all temperatures and pressures is to reisomerize to the parent acetamide. 1-Aminoethenol, in particular, is predicted to be a long-lived species enabling its participation in bimolecular reactions that lead to the formation of the major experimental products. Results presented herein reflect the importance of bimolecular reactions involving acetamide and 1-aminoethenol in building a robust model for the pyrolysis of N-alkylated amides.     

Synthesis of 1,2,3-triazole linked galactopyranosides and evaluation of cholera toxin inhibition

We report the synthesis of a series of bivalent 1,2,3-triazole linked galactopyranosides as potential inhibitors of cholera toxin (CT). The inhibitory activity of the bivalent series was examined (ELISA) and the series showed low inhibitory activity (millimolar IC(50)s). Conversely, the monomeric galactotriazole analogues were strong inhibitors of cholera toxin (IC(50) = 71-75 μM).     

Synthesis and application of isocyanates radiolabeled with carbon-11

Carbon-11 labeled isocyanates are efficiently prepared by dehydration of [(11) C]carbamate salts, which in turn are easily formed from cyclotron-produced [(11) C]CO(2) and amines in the presence of a CO(2) fixation agent. The [(11) C]isocyanates are useful radiosynthons for the synthesis of a variety of [carbonyl-(11) C]-labeled asymmetrical ureas and carbamate esters. The method is well suited to incorporate any isotope of carbon, and is especially useful for positron emission tomography (PET) radiotracers for in vivo imaging. This is demonstrated by using the method to make [carbonyl-(11) C]-6-hydroxy-[1,1'-biphenyl]-3-yl cyclohexylcarbamate which is a novel radiotracer for PET imaging of fatty acid amide hydrolase.     

Carbene-mediated transformations of 1-(benzylideneamino)benzimidazoles

Carbene-mediated transformations of N-(3-butylbenzimidazol-3-ium-1-yl)-1-arylmethanimine iodides with carbon disulfide and benzoyl isothiocyanate gave the corresponding NHC·CS(2) betaines in 68-85% and benzoyl-[1-butyl-3-[(E)-(aryl)methyleneamino]benzimidazol-1-ium-2-carbothioyl]azanides, respectively, in 74-85% yields. However, reaction with excess isopropyl isothiocyanate in NaH/THF at room temperature yielded the 1-butyl-1',3'-diisopropyl-3-[(E)-(aryl)methyleneamino]spiro[benzimidazole-2,5'-imidazolidine]-2',4'-dithiones (74-77%).     

A recyclable, self-supported organocatalyst based on a poly(N-heterocyclic carbene)

We report the synthesis and catalytic activity of a polymeric imidazolium salt. In contrast to the well-known resin-supported N-heterocyclic carbenes (NHCs), the material described herein affords a polymer with NHCs orthogonally positioned along a main chain upon generation in situ. The unique structural characteristics of the corresponding poly(NHC)s enabled the materials to display catalytic activities that were similar or superior to those displayed by monomeric analogues. Moreover, the new catalyst was successfully recovered and reused with minimal loss of performance over several cycles.