An efficient synthesis of furano analogs of duocarmycin C1 and C2: seco-iso-cyclopropylfurano[e]indoline-trimethoxyindole and seco-cyclopropylfurano[f]quinoline-trimethoxyindole

seco-Iso-cyclopropylfurano[e]indoline-trimethoxyindole 1 and seco-cyclopropylfurano[f]quinoline-trimethoxyindole 2 are potent cytotoxic agents. Previous synthesis of these compounds was inefficient and the approach required separation of a mixture containing the isomeric indoline and quinoline intermediates 11 and 12, formed from radical cyclization of allylic bromide 10. Reported herein is an efficient and selective synthesis of either intermediate 11 or 12, thus product 1 or 2, as needed. The conditions of the Stobbe condensation, bromination, 5-exo-trig radical cyclization, amine-carboxylic acid coupling, and debenzylation were optimized for multi gram scale. As a result, the reaction times were shortened, the products were readily isolated, and the yields and purity improved.     

Favipiravir (SARS-CoV-2) degradation impurities: Identification and route of degradation mechanism in the finished solid dosage form using LC/LC–MS method

Favipiravir finished dosage was approved for emergency use in many countries to treat SARS-CoV-2 patients. A specific, accurate, linear, robust, simple, and stability-indicating HPLC method was developed and validated for the determination of degradation impurities present in favipiravir film-coated tablets. The separation of all impurities was achieved from the stationary phase (Inert sustain AQ-C18, 250 × 4.6 mm, 5-μm particle) and mobile phase. Mobile phase A contained KH₂PO₄ buffer (pH 2.5 ± 0.05) and acetonitrile in the ratio of 98:2 (v/v), and mobile phase B contained water and acetonitrile in the ratio of 50:50 (v/v). The chromatographic conditions were optimized as follows: flow rate, 0.7 mL/min; UV detection, 210 nm; injection volume, 20 μL; and column temperature, 33°C. The proposed method was validated per the current International Conference on Harmonization Q2 (R1) guidelines. The recovery study and linearity ranges were established from the limit of quantification to 150% optimal concentrations. The method validation results were found to be between 98.6 and 106.2% for recovery and r² = 0.9995–0.9999 for linearity of all identified impurities. The method precision results were achieved below 5% of relative standard deviation. Forced degradation studies were performed in chemical and physical stress conditions. The compound was sensitive to chemical stress conditions. During the study, the analyte degraded and converted to unknown degradation impurities, and its molecular mass was found using the LC–MS technique and established degradation pathways supported by reaction of mechanism. The developed method was found to be suitable for routine analysis of research and development and quality control.     

Lattice engineering route for self-assembled nanohybrids of 2D layered double hydroxide with 0D isopolyoxovanadate: chemiresistive SO2 sensor

Tuning the interior chemical composition of layered double hydroxides (LDHs) via lattice engineering route is a unique approach to enable multifunctional applications of LDHs. In this regard, the exfoliated 2D LDH nanosheets coupled with various guest species lead to the lattice-engineered LDH-based multifunctional self-assembly with precisely tuned chemical composition. This article reports the synthesis and characterization of mesoporous zinc–chromium-LDH (ZC-LDH) hybridized with isopolyoxovanadate nanohybrids (ZCiV) via lattice-engineered self-assembly between delaminated ZC-LDH nanosheets and isopolyoxovanadate (iPOV) anions. Electrostatic self-assembly between 2D ZC-LDH monolayers and 0D iPOV significantly altered structural, morphological, and surface properties of ZC-LDH. The structural and morphological study demonstrated the formation of mesoporous interconnected sheet-like architectures composed of restacked ZCiV nanosheets with expanded surface area and interlayer spacing. In addition, the ZCiV nanohybrid resistive elements were used as a room-temperature gas sensor. The selectivity of ZCiV nanohybrid was tested for various oxidizing (SO₂, Cl₂, and NO₂) gases and reducing (LPG, CO, H₂, H₂S, and NH₃) gases. The optimized ZCiV nanohybrid demonstrated highly selective SO₂ detection with the maximum SO₂ response (72%), the fast response time (20 s), low detection limit (0.1 ppm), and long-term stability at room temperature (27 ± 2 °C). Of prime importance, ZCiV nanohybrids exhibited moderately affected SO₂ sensing responses with high relative humidity conditions (80%–95%). The outstanding SO₂ sensing performance of ZCiV is attributed to the active surface gas adsorptive sites via plenty of mesopores induced by a unique lattice-engineered interconnected sheet-like microstructure and expanded interlayer spacing.     

Lanthanum sulfide-manganese sulfide/graphene oxide (La2S3-MnS/GO) composite thin film as an electrocatalyst for oxygen evolution reactions

Journal of Solid State Electrochemistry - In this study, the lanthanum sulfide-manganese sulfide (La2S3-MnS) nanosheet composite films with different thicknesses were grown on graphene oxide (GO)...     

One-pot multicomponent synthesis of N-sulfonyl amidines using magnetic separable nanoparticles-decorated N-heterocyclic carbene complex with copper

Research on Chemical Intermediates - Magnetic separable nanoparticles-decorated N-heterocyclic carbene complex with copper (MNP[1-Methyl benzimidazole]NHC@Cu) has been prepared by covalent grafting...     

Thermodynamic parameters of dilute solutions of a polymer in benzene at varying temperatures and concentrations

Dilatometric studies of solutions of four different mole fractions of poly(ethylene glycol) of average molecular mass 400 g mol^?1 dissolved in benzene have been performed to estimate molar volumes (V) and volume expansion coefficients (α) at different temperatures. From these, thermodynamic parameters appropriate to these solutions have been evaluated at different temperatures ranging from 299 to 328 K. These parameters have been employed to collect and discuss the information on molecular structure, molecular order, molecular packing, polymer segment extension, and molecular interactions.     

A Fluorescent and Colorimetric Sensor for Nanomolar Detection of Co2+ in Water

A new disulfide‐based, imine‐linked fluorescent receptor 1 was processed into organic nanoparticles (ONPs) with an average particle size of 79 nm. The photophysical properties of the ONPs were evaluated by UV/Vis absorption spectroscopy. Receptor 1 selectively recognized Co²⁺ ions in water with a detection limit down to 88 nm.     

Novel one-pot synthesis of 4H-chromene derivatives using amino functionalized silica gel catalyst

A simple, efficient, and environmentally benign method for the synthesis of 4H-chromene derivatives was developed using well ordered and recoverable amino functionalized silica gel as a base catalyst. The 4H-chromene derivatives were obtained in short time and excellent yield(87%–96%) by three component reaction of aldehydes, malononitrile and cyclic 1,3-diketones in water at 70 8C.     

Plant Extract: A Promising Biomatrix for Ecofriendly,Controlled Synthesis of Silver Nanoparticles

Uses of plants extracts are found to be more advantageous over chemical, physical and microbial (bacterial, fungal, algal) methods for silver nanoparticles (AgNPs) synthesis. In phytonanosynthesis, biochemical diversity of plant extract, non-pathogenicity, low cost and flexibility in reaction parameters are accounted for high rate of AgNPs production with different shape, size and applications. At the same time, care has to be taken to select suitable phytofactory for AgNPs synthesis based on certain parameters such as easy availability, large-scale nanosynthesis potential and non-toxic nature of plant extract. This review focuses on synthesis of AgNPs with particular emphasis on biological synthesis using plant extracts. Some points have been given on selection of plant extract for AgNPs synthesis and case studies on AgNPs synthesis using different plant extracts. Reaction parameters contributing to higher yield of nanoparticles are presented here. Synthesis mechanisms and overview of present and future applications of plant-extract-synthesized AgNPs are also discussed here. Limitations associated with use of AgNPs are summarised in the present review.