A general synthetic approach for the synthesis of β-hydroxy-δ-lactones: asymmetric total synthesis of prelactones and epi-prelactones V and E

A general synthetic approach for the synthesis of prelactones and epi-prelactones V and E has been reported using an Evans’ aldol reaction as the key step.     

Catalytic Induced Thermal Conversion of Amorphous Carbon into Single Walled Carbon Nanotubes

Single walled carbon nanotubes (SWNTs) have caught extensive attention in the field of material science and electronics. Their formation typically uses plasma arc or CVD techniques [1–3]. So far, formation of SWCNTs just by thermal conversion of amorphous, non graphitic carbon which is a nearly ubiquitous carbon source is challenging but has not been reported so far. We herein demonstrate the catalytic growth of SWNTs from an amorphous carbon source (activated charcoal powder, ‘Aktivkohle’) mediated by three different catalytically active metals; metallic nickel, nickel derived from bis(η⁵‐cyclopentadienyl)nickel (nickelocene) and yttrium formed in situ from yttrium oxide.     

A novel transformation of 1-exo-substituted 2a-aroyl-1,2,2a,8b-tetrahydro-3H-benzo[b]cyclobuta[d]pyran-3-ones with sulfoxonium ylide to highly strained 2a-(1-arylethenyl)-1,2,2a,7b-tetrahydrocyclobuta[b]benzofurans

When 1-substituted 2a-aroyl-1,2,2a,8b-tetrahydro-3H-benzo[b]cyclobuta[d]pyran-3-ones (1) were treated with dimethylsulfoxonium methylide, 1-endo isomers (endo-1) gave 1-substituted 3-aroyl-1,2,4a,9b-tetrahydrodibenzofuran-4-ols (2) exclusively as expected. On the other hand, 1-exo isomers (exo-1) underwent a novel transformation to 1-substituted 2a-(1-arylethenyl)-1,2,2a,7b-tetrahydrocyclobuta[b]benzofurans (3), together with 2.     

Three-component coupling reactions of isoquinolines, dimethyl acetylenedicarboxylate and indoles: a facile synthesis of 3-indolyl-1,2-dihydro-2-isoquinolinyl-2-butenedioate

A three-component coupling of isoquinolines, dimethyl acetylenedicarboxylate (DMAD) and indoles is achieved for the first time to produce dimethyl (E)-2-[1-(1H-3-indolyl)-1,2-dihydro-2-isoquinolinyl]-2-butenedioates in excellent yields and with high selectivity. The reaction proceeds smoothly at room temperature without a catalyst. Quinoline, DMAD and indole also undergo smooth coupling to furnish dimethyl (E)-2-[2-(1H-3-indolyl)-1,2-dihydro-1-quinolinyl]-2-butenedioate under similar conditions. This method is very useful to functionalize both indoles and aza-aromatic compounds in a one-pot operation.     

Topological and thermodynamic investigations of molecular interactions of aniline and o-toluidine with chloroform

Molar excess volumes, V^E, molar excess enthalpies, H^E, and speeds of sound data, u, of chloroform (i) + aniline or o-toluidine (j) binary mixtures have been measured as a function of composition at 308.15 K. Isentropic compressibility changes of mixing, have been determined by employing speed of sound data. Topological investigations of V^E data reveals that aniline, chloroform and o-toluidine are associated entities and these (i + j) mixtures contain a 1:1 molecular complex. The IR studies lend further support to the nature and extent of interaction for the proposed molecular entity in the mixtures. H^E and values have also been calculated by employing Moelwyn-Huggins concept [Polymer 12 (1971) 387] taking topology of the constituents of the mixtures. It has been observed that calculated H^E and values compare well with their corresponding experimental values. The observed V^E, H^E and data have also been analyzed in terms of Flory theory.     

Kinetic determination of silver at trace level based on its catalytic effect on a ligand substitution reaction

It is observed that Ag(I) catalyzes the rate of substitution of phenylhydrazine (PhNHNH₂) into hexacyanoferrate(II), producing a cherry red colored complex, [Fe(CN)₅PhNHNH₂]³⁻. The reaction was monitored at 488 nm leading to the formation of the complex under the conditions: [Fe(CN)₆]⁴⁻ (5.0 × 10⁻³ mol dm⁻³), PhNHNH₂ (2.0 × 10⁻³ mol dm⁻³), temperature (25 ± 0.1 °C), pH (2.8 ± 0.02), and ionic strength, I (0.02 mol dm⁻³), (KNO₃). Under optimum conditions, absorbance at fixed times (A _t ) is linearly related to Ag(I) in the concentration range 10.79–97.08 ng cm⁻³, in the presence of several diverse ions. The highest percentage error and relative standard deviations in the entire range of Ag(I) determination are found to be 2.5% and 0.16, with a detection limit of 8.75 ng cm⁻³ of silver(I). The experimental accuracies expressed in terms of percentage recoveries are in the range of 97.87–102.50. The method was successfully applied for the determination of Ag(I) in a few synthetic samples and found to be in good agreement with those obtained from atomic absorption spectrophotometry (AAS). The validity of the proposed method has also been tested for Ag(I) determination in spiked drinking water samples. The present catalytic kinetic method (CKM) is highly sensitive, selective, reproducible, and inexpensive. A review of recently published catalytic spectrophotometric methods for determination of Ag(I) has also been presented for comparison.     

Drop retention force as a function of resting time

The force, f, required to slide a drop on a surface is shown to be a growing function of the time, t, that the drop waited resting on the surface prior to the commencement of sliding. In this first report on the resting time effect, we demonstrate the existence of this phenomenon in different systems, which suggests that this phenomenon is general. We show that d f/d t is never negative. The shorter the resting times, the higher d f/d t is. As the resting time increases, d f/d t decreases toward zero (plateau) as t --> infinity. The increase in the force, Delta f, due to the resting time effect (i.e., f( t --> infinity) - f( t --> 0)) correlates well with the vertical component of the liquid-vapor surface tension, and we attribute this phenomenon to the corrugation of the surface by the drop due to this unsatisfied normal component of Young's equation.     

Drop retention force as a function of drop size

The force, f, required to slide a drop past a surface is often considered in the literature as linear with the drop width, w, so that f/w = const. Furthermore, according to the Dussan equation for the case that the advancing and receding contact angles are constant with drop size, one can further simplify the above proportionality to f/V(1/3) = const where V is the drop volume. We show, however, that experimentally f/V(1/3) is usually a decaying function of V (rather than constant). The retention force increases with the time the drop rested on the surface prior to sliding. We show that this rested-time effect is similar for different drop sizes, and thus the change of f/V(1/3) with V occurs irrespective of the rested-time effect which suggests that the two effects are induced by different physical phenomena. The time effect is induced by the unsatisfied normal component of the Young equation which slowly deforms the surface with time, while the size effect is induced by time independent properties. According to the Dussan equation, the change of f/V(1/3) with V is also expressed in contact angle variation. Our results, however, show that contact angle variation that is within the scatter suffices to explain the significant force variation. Thus, it is easier to predict contact angle variation based on force variation rather than predicting force variation based on contact angle variation. A decrease of f/V(1/3) with V appears more common in the system studied compared to an increase.     

Liquid chromatography/mass spectrometric studies on atorvastatin and its stress degradation products

A comprehensive mass fragmentation pathway of atorvastatin, which has not been reported so far, was established by subjecting the drug to multi-stage mass spectrometric (MSn) studies. It was used along with liquid chromatography/mass spectrometric (LC/MS) and liquid chromatography/time-of-flight mass spectrometric (LC/TOFMS) analyses to identify the drug degradation products formed under stress conditions of hydrolysis, oxidation and photolysis. Other than lactone, which is a reported hydrolysis product, six unknown hydrolytic products could be identified, viz., dehydrated drug, dehydrated drug lactone, and diastereomers of the drug, drug lactone, dehydrated drug, and dehydrated drug lactone. Among the two products separated under oxidative conditions, one was lactone, again formed as a result of drug hydrolysis in an acidic environment of peroxide solution. The other was similar to a reported oxidative product. Under photolytic conditions in solution, one new product could be identified, while most of the others matched with those known from the literature. Hence overall a more complete degradation pathway of the drug was established than known at present, by using a stress testing approach and employing LC/MS techniques.