Speciation of arsenic in ground water samples: A comparative study of CE-UV, HG-AAS and LC-ICP-MS

The performance of capillary electrophoresis-ultraviolet detector (CE-UV), hydride generation-atomic absorption spectrometry (HG-AAS) and liquid chromatography-inductively coupled plasma mass spectrometry (LC-ICP-MS) have been compared for the speciation of arsenic (As) in groundwater samples. Two inorganic As species, arsenite (As^III), arsenate (As^V) and one organo species dimethyl arsenic acid (DMA) were mainly considered for this study as these are known to be predominant in water. Under optimal analytical conditions, limits of detection (LD) ranging from 0.10 (As^III, AsT) to 0.19 (DMA) μg/l for HG-AAS, 100 (As^III, DMA) to 500 (As^V) μg/l for CE-UV and 0.1 (DMA, MMA) to 0.2 (As^III, As^V) μg/l for LC-ICP-MS, allowed the determination of the above three species present in these samples. Results obtained by all the three methods are well correlated (r² = 0.996*** for total As) with the precision of <5% R.S.D. except CE-UV. The effect of interfering ions (e.g. Fe²⁺, Fe³⁺, SO₄²⁻ and Cl⁻) commonly found in ground water on separation and estimation of As species were studied and corrected for. Spike recovery was tested and found to be 80-110% at 0.5 μg/l As standard except CE-UV where only 50% of the analyte was recovered. Comparison of these results shows that LC-ICP-MS is the best choice for routine analysis of As species in ground water samples.     

Isometric graphing and multidimensional scaling for reaction-diffusion modeling on regular and fractal surfaces with spatiotemporal pattern recognition

Heterogeneous surface reactions exhibiting complex spatiotemporal dynamics and patterns can be studied as processes involving reaction-diffusion mechanisms. In many realistic situations, the surface has fractal characteristics. This situation is studied by isometric graphing and multidimensional scaling (IGMDS) of fractal surfaces for extracting geodesic distances (i.e., shortest scaled distances that obtain edges of neighboring surface nodes and their interconnections) and the results obtained used to model effects of surface diffusion with nonlinear reactions. Further analysis of evolved spatiotemporal patterns may be carried out by IGMDS because high-dimensional snapshot data can be efficiently projected to a transformed subspace with reduced dimensions. Validation of the IGMDS methodology is carried out by comparing results with reduction capabilities of conventional principal component analysis for simple situations of reaction and diffusion on surfaces. The usefulness of the IGMDS methodology is shown for analysis of complex patterns formed on both regular and fractal surfaces, and using generic nonlinear reaction-diffusion systems following FitzHugh Nagumo and cubic reaction kinetics. The studies of these systems with nonlinear kinetics and noise show that effects of surface disorder due to fractality can become very relevant. The relevance is shown by studying properties of dynamical invariants in IGMDS component space, viz., the Lyapunov exponents and the KS entropy for interesting situations of spiral formation and turbulent patterns.     

Determination of H2 and D2 content in metals and alloys using hot vacuum extraction

A hot vacuum extraction technique for the determination of hydrogen in metal and alloy samples has been standardised. After measuring the total pressure of the evolved gases, individual hydrogen and deuterium intensities are measured using an on-line quadrupole mass spectrometer. Synthetic mixtures of H₂ and D₂, in known concentrations, have been analysed by QMS and an analytical expression correlating the measured [D₂]/[HD] intensity ratio with the mole fraction of deuterium in the synthetic mixture has been arrived at. The precision and accuracy in the measurement of hydrogen is about 10% at 50 ppmw level.     

Natural radioactivity distribution in geological matrices around Kaiga environment

Summary The activity and absorbed dose rate of the naturally occurring radionuclides, viz. ²³⁸U, ²³² Th and ⁴⁰K were determined in soil and rock samples collected around Kaiga site. The mean activity levels (Kaiga soil) of naturally occurring ²³² Th are comparable with that in worldwide soil, while concentrations of ²³⁸U and ⁴⁰K are lower than those in worldwide soil. The absorbed dose rate in outdoor air ranged 20-58 nGy ^. h^-1 with a mean of 33.3 nGy ^. h^-1, which is below the world average of 60 nGy ^. h^-1. The total effective dose rate in outdoor air for soils ranged 25.6-74.4 mSv ^. y^-1 with a mean of 43.0 mSv ^. y^-1. The estimated dose rate at Kaiga is comparable with that estimated at Kakrapar and Rawatbhata and much less than that estimated at coastal sites of India.     

Construction of 4D-QSAR Models for Use in the Design of Novel p38-MAPK Inhibitors

The p38-mitogen-activated protein kinase (p38-MAPK) plays a key role in lipopolysaccharide-induced tumor necrosis factor-alpha (TNF-alpha) and interleukin-1 (IL-1) release during the inflammatory process, emerging as an attractive target for new anti-inflammatory agents. Four-dimensional quantitative structure-activity relationship (4D-QSAR) analysis [Hopfinger et al., J. Am. Chem. Soc., 119 (1997) 10509] was applied to a series of 33 (a training set of 28 and a test set of 5) pyridinyl-imidazole and pyrimidinyl-imidazole inhibitors of p38-MAPK, with IC50 ranging from 0.11 to 2100 nM [Liverton et al., J. Med. Chem., 42 (1999) 2180]. Five thousand conformations of each analogue were sampled from a molecular dynamics simulation (MDS) during 50 ps at a constant temperature of 303 K. Each conformation was placed in a 2 angstroms grid cell lattice for each of three trial alignments. 4D-QSAR models were constructed by genetic algorithm (GA) optimization and partial least squares (PLS) fitting, and evaluated by leave-one-out cross-validation technique. In the best models, with three to six terms, the adjusted cross-validated squared correlation coefficients, Q2adj, ranged from 0.67 to 0.85. Model D (Q2adj = 0.84) was identified as the most robust model from alignment 1, and it is representative of the other best models. This model encompasses new molecular regions as containing pharmacophore sites, such as the amino-benzyl moiety of pyrimidine analogs and the N1-substituent in the imidazole ring. These regions of the ligands should be further explored to identify better anti-inflammatory inhibitors of p38-MAPK.     

Intramolecular 1,3-dipolar cycloaddition of cyclo-1,3-diene-tethered nitrile oxides

Intramolecular 1,3-dipolar cycloaddition of cyclo-1,3-diene- and -1,3,5-triene-tethered nitrile oxides gave tricyclic isoxazolines as a single stereoisomer in most cases. The relative stereochemistry of tricycle-fused isoxazolines resulting from 1,3-dipolar cycloaddition of cyclo-1,3-diene-tethered nitrile oxides is cis-cis, whereas from cyclohepta-1,3,5-triene-tethered nitrile oxides the cis-trans isomer predominates.     

Synthesis of Pharmaceutical Intermediates by Toluene Benzylation over Heteropoly Acids on Different Support

Selective formation of pharmaceutical intermediates like diphenylmethane, dimethyl- diphenylmethane, benzyl toluene and benzoic acid by liquid phase, toluene benzylation with benzyl chloride as a benzylating agent, was systematically studied over plane clay (K-10, montmorillonite), plane H-Beta, plane MFI structured titanosilicate (TS-1) and heteropoly acids [HPA, namely dodeca-tungstophosphoric acid [H3PO4.12WO3.xH2O] (TPA), dodeca-molybdo phosphoric acid ammonium salt hydrate [H12Mo12N3O40P aq] (DMAA), sodium tungstate hydrated purified [Na12WO4.2H2O] (STH)] supported on clay, H-beta and TS-1. The 20%TPA/Clay, 30%TPA/H-Beta and 30%TPA/TS-l, were observed to be the best catalyst samples over plane clay, plane H-Beta and plane TS-1. The catalyst samples are compared with respect to benzyl chloride conversion and selectivities for diphenylmethane, dimethyl-diphenylmethane, benzyl toluene and benzoic acid. The reaction follows the pseudo-first order rate power law model. The apparent rate constants are calculated and compared with the reported ones.     

In vitro and in vivo investigations on the photodynamic activity of core-modified expanded porphyrin--ammonium salt of 5,10,15,20-tetrakis-(meso-p-sulfonato phenyl)-25,27,29-trithia sapphyrin

The core modification of expanded porphyrins has been proved to have better photochemical properties, which are favorable for photodynamic therapy (PDT) applications. In this context, this study was aimed to investigate the in vitro and in vivo photodynamic activity of one such core-modified expanded porphyrin, namely, ammonium salt of 5,10,15,20-tetrakis-(meso-p-sulfonato phenyl)-25,27,29-trithia sapphyrin. For the in vitro studies, human erythrocytes were used as a membrane semimodel system to investigate the partitioning ability and drug-uptake characteristics. The partition studies on the membrane semimodel system revealed that maximum partitioning occurs at 12 microgm/mL concentration, and from the drug-uptake studies it is observed that maximum amount of the sensitizer is bound to the erythrocyte membranes during a 45 min incubation period. Photohemolysis studies at different concentrations of the sensitizer and exposure time showed maximum damage at 5 microgm/mL and 30 min exposure time. In vivo studies were performed on 7,12-dimethylbenz(a)nthracene-induced superficial squamous cell carcinoma on mouse skin. The sensitizer at a concentration of 2.5% in 2.0% dimethyl sulfoxide was applied topically on the tumor spot. After 1 h incubation the tumor spot was exposed to laser irradiation from Nd-YAG laser at its second harmonic wavelength of 532 nm. The photodynamic efficacy was estimated by tumor volume measurements at regular intervals after the treatment. One month after PDT exposure a 3.9-fold decrease in the tumor volume was observed with respect to the tumor volume before treatment. The treatment efficacy was further confirmed by histological and fluorescence spectroscopic evaluations of the tissue biopsy sample from the treated area. The results of our study suggest that the ammonium salt of 5,10,15,20-tetrakis-(meso-p-sulfonato phenyl)-25,27,29-trithia sapphyrin may find possible applications in the new modality of cancer treatment.     

Estimation of 90Sr in reprocessed uranium oxide samples

Summary A method has been developed for the estimation of ⁹⁰Sr in reprocessed uranium oxide samples obtained from the Purex processing of natural uranium spent fuel discharged from the research reactor. The method employs a combination of precipitation and solvent extraction procedure to eliminate other beta-impurities prior to resorting to the estimation of ⁹⁰Sr by beta-counting. ¹⁰⁶Ru was eliminated by volatalizing with perchloric acid, uranium was removed by carrier precipitation with strontium as sulphate. The sulphate precipitate was converted to carbonate and dissolved in nitric acid. ²³⁴Th and ²³⁴Pa were eliminated by synergistic solvent extraction using tri-n-butyl phosphate and thenoyl trifluoroacetone extractant mixture in xylene. An iron scavenging step was included to remove any residual impurities. Finally, strontium is precipitated as SrC₂O₄^. H₂O. The separated ⁹⁰Sr activity was followed to check the equilibrium growth of ⁹⁰Y.