DMAP-catalyzed synthesis of 2-oxazolidinones from corresponding halohydrins using KOCN/DMF

We report facile and simple synthesis of a variety of 2-oxazolidinones from the corresponding halohydrins by reaction with KOCN in DMF catalyzed by DMAP. DMAP and temperature play key roles in enriching the yield of 2-oxazolidinones. A few examples in this Letter are applicable to pharmaceutically important processes.     

High-performance liquid chromatographic enantioseparation of (R,S)-fluoxetine using Marfey's reagent and (S)-N-(4-nitrophenoxycarbonyl) phenylalanine methoxyethyl ester as chiral derivatizing reagents along with direct thin-layer chromatographic resolution and isolation of enantiomers using L-tartaric acid as mobile phase additive

Chiral assay of enantiomers of fluoxetine was achieved in pharmaceutical formulations using direct and indirect methods. L-tartaric acid was used as a mobile phase additive in thin-layer chromatography; the enantiomers were separated and isolated and were used to determine the elution order in HPLC. (R,S)-flouxetine was derivatized with (S)-N-(4-nitrophenoxycarbonyl)phenylalanine methoxyethyl ester [(S)-NIFE], Marfey's reagent and 1-fluoro-2,4-dinitrophenyl-L-methionine amide (FDNP-L-Met-NH?. The diastereomers were separated using RP-HPLC. The effect of flow rate and TFA concentration on resolution was studied. The diastereomers obtained by derivatization with FDNP-L-Met-NH? were also separated by RP-TLC.     

Nanofibrous polyaniline thin film prepared by plasma‐induced polymerization technique for detection of NO2 gas

A nanofibrous polyaniline (PANI) thin film was fabricated using plasma‐induced polymerization method and explored its application in the fabrication of NO₂ gas sensor. The effects of substrate position, pressure, and the number of plasma pulses on the PANI film growth rate were monitored and an optimum condition for the PANI thin film preparation was established. The resulting PANI film was characterized with UV–visible spectrophotometer, FTIR, scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The PANI thin film possessed nanofibers with a diameter ranging from 15 to 20 nm. The NO₂ gas sensing behavior was studied by measuring the change in electrical conductivity of PANI film with respect to NO₂ gas concentration and exposure time. The optimized sensor exhibited a sensitivity factor of 206 with a response time of 23 sec. The NO₂ gas sensor using nanofibrous PANI thin film as sensing probe showed a linear current response to the NO₂ gas concentration in the range of 10–100 ppm. Copyright © 2009 John Wiley & Sons, Ltd.     

A Structural Diversity of Molecular Alkaline-Earth-Metal Polyphosphides: From Supramolecular Wheel to Zintl Ion

A series of molecular group 2 polyphosphides has been synthesized by using air-stable [Cp*Fe(η⁵-P₅)] (Cp*=C₅Me₅) or white phosphorus as polyphosphorus precursors. Different types of group 2 reagents such as organo-magnesium, mono-valent magnesium, and molecular calcium hydride complexes have been investigated to activate these polyphosphorus sources. The organo-magnesium complex [(^DippBDI−Mg(CH₃))₂] (^DippBDI={[2,6-ⁱPr₂C₆H₃NCMe]₂CH}⁻) reacts with [Cp*Fe(η⁵-P₅)] to give an unprecedented Mg/Fe-supramolecular wheel. Kinetically controlled activation of [Cp*Fe(η⁵-P₅)] by different mono-valent magnesium complexes allowed the isolation of Mg-coordinated formally mono- and di-reduced products of [Cp*Fe(η⁵-P₅)]. To obtain the first examples of molecular calcium-polyphosphides, a molecular calcium hydride complex was used to reduce the aromatic cyclo-P₅ ring of [Cp*Fe(η⁵-P₅)]. The Ca-Fe-polyphosphide is also characterized by quantum chemical calculations and compared with the corresponding Mg complex. Moreover, a calcium coordinated Zintl ion (P₇)³⁻ was obtained by molecular calcium hydride mediated P₄ reduction.     

Mechanoluminescence and thermoluminescence of Mn doped ZnS nanocrystals

This paper reports the synthesis of ZnS:Mn nanocrystals by the chemical route in which mercaptoethanol was used as the capping agent. The particle size of such nanocrystals was measured using XRD and TEM patterns and was found to be in between 3and 5 nm. It was found that the peak position of TL glow curve and the TL intensity of ZnS:Mn nanoparticles increases as the particle size is decreased. The isothermal decay technique is used to determine the trap-depth. The stability of the charge carriers in the traps increase with the decrease in size of the nanoparticles. The higher stability may be attributed to the higher surface/volume ratio and also to the increase in the trap-depth with decreasing particle size. When a ZnS:Mn nanocrystal is deformed the peak intensity I_m increases linearly with the increasing height of the load. After I_m, initially the ML intensity decreases at a fast rate, and later on it decreases at a slow rate. The ML in ZnS:Mn nanocrystals can be understood on the basis of the piezoelectrically induced electron detrapping model.     

VEGFR-2 targeted cellular delivery of doxorubicin by gold nanoparticles for potential antiangiogenic therapy

We report a novel gold nanobioconjugate system that achieves targeted delivery of the small molecule drug doxorubicin to endothelial cells using anti-VEGFR-2 antibody conjugated gold nanoparticles (GNPs). The reported nanobioconjugate system combines the inherent ability of GNPs to undergo high levels of derivatization with the precision of antibody recognition of a cell surface antigen. Transmission electron microscopy (TEM) and surface-enhanced Raman spectroscopy (SERS) confirmed intracellular presence of the GNPs. Using a VEGFR-2 expressing cell line and a cell line that is negative for the receptor, in combination with competition assay we established the cell specific targeted delivery of the nanobioconjugate. The nanobioconjugate system described here may have potential drug delivery applications for antiangiogenic cancer therapy.     

Controlled hydrothermal growth of ZnO nanostructures by sequestering the Zn metal ions with the chelating agent EDTA

In the present work, a controlled growth of ZnO nanostructures by manipulating Zn metal ion concentration by the chelating action of ethylene diaminetetra acetic acid in hydrothermal method is studied. EDTA produces metal–chelate complex by the formation of bidentate ligand with Zn²⁺ in the solution and diminishes the reactivity of Zn metal cations. Concentration of EDTA in the mother solution was varied in different ranges like 3, 5 and 10 mM while retaining the zinc metal salt and the NaOH concentration the same. Three different morphologies of wurtzite structured ZnO nanostructures such as nanorods-bunch, separate/discrete uniformly sized hexagonal nanorods and tapered flower petals like shapes are achieved by 3, 5 and 10 mM strengths of EDTA, respectively. The medium concentration 5 mM of EDTA is found to have moderate control over producing ZnO nanostructures of uniform diameter and a high aspect (length to diameter) ratio. An array of vertically aligned free standing ZnO nanorods with uniform spacing is successfully achieved by the addition of 5 mM of EDTA in the mother solution and the same is studied for its fluorescence property at an excitation of 325 nm and it has exhibited a characteristic UV emission of ZnO around 383 nm.     

Simultaneous velocity and temperature measurements in gaseous flow fields using the VENOM technique

We present an initial demonstration of simultaneous velocity and temperature mapping in gaseous flow fields using a new nitric oxide planar laser-induced fluorescence-based method. The vibrationally excited NO monitoring (VENOM) technique is an extension of two-component velocimetry using vibrationally excited NO generated from the photodissociation of seeded NO(2) [Appl. Opt. 48, 4414 (2009)], where the two sequential fluorescence images are obtained probing two different rotational states to provide both velocity and temperature maps. Comparisons to computational fluid dynamics simulations show that the initial VENOM measurements provide good velocity and temperature maps in the relatively high-density regions of the flow, where the rms uncertainties are approximately 5% for velocity and 9% for temperature.     

Engineering the plasmon resonance of large area bimetallic nanoparticle films by laser nanostructuring for chemical sensors

Large area fabrication of metal alloy nanoparticles with tunable surface plasmon resonances on low-cost substrates is reported. A UV excimer laser was used to anneal 5 nm thick Ag Au bilayer films deposited with different composition ratios to create alloy nanoparticles. These engineered surfaces are used to investigate how the wavelength of the surface plasmon resonance affects the optical detection capability of chemical species by surface-enhanced Raman spectroscopy.