Studies on exchange equilibria of cations between cation-exchange membranes and electrolytic solutions

The variations of the selectivity coefficient K(A)(B) between Na(+)-H(+), Na(+)-K(+), and Na(+)-Cu(2+) systems and the separation factor alpha(A)(B) between Na(+)-Cu(2+) and K(+)-Cu(2+) systems in cation-exchange membranes as functions of loading and particle size of resin have been measured. The exchange affinities of all the membranes increase as H(+)相似文献   

Structure and conformational equilibrium of thiacalix[4]arene by density functional theory

Density functional theory calculations for the structure and conformational equilibrium of thiacalix[4]arene are reported. The conformational equilibrium of thiacalix[4]arene, a heterocalixarene in which the phenol groups are bridged by sulphur atoms is compared to the conformational equilibrium of calix[4]arene. Thiacalix[4]arene conformational energies relative to the cone conformer (ΔE's) are reduced in comparison with calix[4]arene. This conformational change is in qualitative agreement with recent NMR spectroscopy measurements of the conformational equilibrium for a tetraethylether of thiacalix[4]arene in a CDCl₃ solution which indicates an enhanced chemical exchange of thiacalixarene conformers in comparison with similar methylene bridged structures. Density functional theory results for the structure of thiacalix[4]arene are in good agreement with recent X-ray diffraction measurements. The electrostatic potentials in the cone conformers of thiacalix[4]arene and calix[4]arene suggest that their complexation or recognition abilities can be significantly different. Dipole moments of the four thiacalix[4]arene conformers are in the order: cone>1,2-alternate>partial-cone>1,3-alternate.     

Linear theory of plasma filled backward wave oscillator

An analytical and numerical study of backward wave oscillator (BWO) in linear regime is presented to get an insight into the excitation of electromagnetic waves as a result of the interaction of the relativistic electron beam with a slow wave structure. The effect of background plasma on the BWO instability is also presented.     

Microdetermination of Mercury in Industrial Waste Waters by Stripping Voltammetry

Abstract

Low levels of mercury have been determined in industrial waste waters by differential pulse anodic stripping voltammetry with a precision of ±3.6 standard deviation. The limit of determination was observed to be 1.0 μg/L.     

Study of thickness-dependent magnetic and transport properties of Fe/Al nanostructures

The paper presents magnetic and transport properties of compositionally modulated Fe/Al multilayer structures (MLS), with an overall atomic concentration ratio of Fe:Al = 3:1, 2:1 and 1:1. All MLS show soft ferromagnetic behaviour at room temperature (RT) with an in-plane easy axis of magnetization. In each case, coercivity increases continuously and magnetization decreases with an increase in temperature due to enhancement in the anisotropy as a result of non-uniform and disordered formation of thin intermixed (dead) FeAl layer at the interfaces. The Curie temperature obtained for the MLS is much less than that of bcc Fe but is well above RT. The observed magnetic behaviour is mainly attributed to the formation of different FeAl phases and increase in anti-ferromagnetic interlayer coupling with addition of Al. The formation of these phases is also supported by resistivity results. The results of this research enabled us to understand that by controlling of layers thickness and temperature in multilayer systems, the nanogranular thin films with good resistive and soft magnetic properties can be obtained.     

Recovery and purification of Sr(II) in perchloric acid medium

Perchloric acid was found to be a suitable medium for the quantitative leaching of Sr(II) from homogeneous and calcined (Th,Sr)O₂ particularly with respect to the contamination from Th(IV). ⁹⁰Sr is a cause of major concern to the environment due to its long half life (28.6 years), significant abundance in large inventory of spent nuclear fuels (~350 thousand tons) awaiting geological disposal and its chemical similarity to Ca(II), an essential element for the living beings. Application of ⁹⁰Sr as a parent radionuclide for ⁹⁰Y (used in therapy radiopharmaceuticals) is possible provided it can be made available at desired high purity. In this context, the distribution coefficients of Sr(II), Th(IV), Zr(IV), Y(III), ¹⁵²Eu(III) and ¹³⁷Cs(I) were determined using Sr selective crown ether 4,4′(5′)-di-tert-butyl-dicyclohexano-18-crown-6 by solid–liquid extraction in perchloric acid medium. Feasibility of employing extraction chromatography using Sr selective resin for the recovery and purification of Sr(II) from leached perchloric acid medium was explored. Perchloric acid medium is better than nitric acid medium for the uptake of Sr by Sr selective chromatographic resin under varying loading conditions of Sr(II). Similarly pH 2 solution appears better eluent of Sr(II) than distilled water. Present work offers a novel approach for setting up a ⁹⁰Sr–⁹⁰Y generator.     

Distribution behavior of U(VI), Am(III) and Eu(III) on diglycolamide based extraction chromatographic resin in perchloric acid medium

An attempt has been made in the present work to investigate the role of anion for the uptake of Am(III)/Eu(III)/U(VI) by extraction chromatography (EXC) resin incorporating tetra-n-octyl-3-oxapentanediamide, commonly referred to as tetra-octyl diglycolamide (TODGA). In contrast to the nitric acid, perchloric acid medium favors extraction of trivalent metal ions even at low acidity (pH 2) and is almost insensitive to the acidity up to 5 M. Exceptionally large distribution coefficients (10⁵–10⁶) in the wide range of perchlorate concentration (10^?2–5 M) is quite unusual and is by far the largest reported in the literature for Am(III)/Eu(III). Thermodynamic data suggests the possibility of inner sphere/cation exchange mechanism involving TODGA aggregates at higher acidity but outer sphere/cation exchange mechanism at low acidity for Eu(III). There is a possibility of employing TODGA based EXC resin for the remediation of liquid waste (contaminated with long lived transuranics like ^241/243Am and ²⁴⁵Cm) in the wide range of acidity.     

In situ control of surface molecular order in liquid crystals using a localised polymer network and its application to electro-optical devices

A liquid crystal (LC) alignment technique has been developed that allows local control of the polar pretilt angle over the range of 0–90°. This was achieved through the formation of a polymer network localised in the vicinity of the LC cell substrates. The network was formed as a result of in situ UV-induced polymerisation of a photo-reactive monomer added at concentrations of 0.5–1%. Localisation of the polymer network at the LC–substrate boundary was achieved by the application of a high voltage before polymerisation. The resultant pretilt angle was determined by the voltage applied during the polymerisation and/or the duration of the voltage application before the polymerisation step. The desired pretilt angle could be set over a small area of the sample, which allows the fabrication of LC devices with spatially variable optical retardation. Using this method we fabricated a converging lens, a bi-prism, and a phase diffraction grating with resolution greater than 50 lines mm^?1.     

Silk‐Ion Jelly: a novel ion conducting polymeric material with high conductivity and excellent mechanical stability

In this work, a thin, flexible and mechanically stable polymer conducting material (Silk‐Ion Jelly) was developed though application of Ion Jelly on to silk fabrics. Ion Jelly was prepared through jellification of a room temperature ionic liquid, 1‐butyl‐3‐methyl‐imidazolium dicyanamide ([bmim][dca]) using gelatin and water and applied to silk fabrics using two different processes: impregnation and in‐situ. Various parameters influencing ionic conductivity such as Ion Jelly composition (ratio of [bmim][dca], water and gelatin) and incorporation as well as the type of application process were thoroughly investigated. It was observed that the Ion Jelly compositions containing lower gelatin and water ratio as well as application through in‐situ process at high temperature (200 °C) led to considerable improvement in conductivity, mainly due to increased [bmim][dca] concentration, structural flexibility and reduced silk crystallinity. Silk‐Ion Jelly prepared using optimized conditions showed excellent mechanical stability and possessed high room temperature conductivity (2.9 × 10^?3 S. cm^?1), similar to [bmim][dca], and therefore, this novel ion conducting material may find potential applications in electrochemical devices due to its eco‐friendly preparation route using biomaterials and green solvents. Copyright © 2012 John Wiley & Sons, Ltd.