Controlled release of ketorolac through nanocomposite films of hydrogel and LDH nanoparticles

A novel nanocomposite film for sustained release of anionic ophthalmic drugs through a double-control process has been examined in this study. The film, made as a drug-loaded contact lens, consists principally of a polymer hydrogel of 2-hydroxyethyl methacrylate (HEMA), in whose matrix MgAl-layered double hydroxide (MgAl-LDH) nanoparticles intercalated with the anionic drug are well dispersed. Such nanocomposite films (hydrogel-LDH-drug) contained 0.6–0.8 mg of MgAl-LDH and 0.08–0.09 mg of the ophthalmic drug (ketorolac) in 1.0 g of hydrogel. MgAl-drug-LDH nanoparticles were prepared with the hydrodynamic particle size of 40–200 nm. TEM images show that these nanoparticles are evenly dispersed in the hydrogel matrix. In vitro release tests of hydrogel-LDH-drug in pH 7.4 PBS solution at 32 °C indicate a sustained release profile of the loaded drug for 1 week. The drug release undergoes a rapid initial burst and then a monotonically decreasing rate up to 168 h. The initial burst release is determined by the film thickness and the polymerization conditions, but the following release rate is very similar, with the effective diffusion coefficient being nearly constant (3.0 × 10⁻¹² m²/s). The drug release from the films is mechanistically attributed to anionic exchange and the subsequent diffusion in the hydrogel matrix.     

Enhancement of Kerr nonlinearity at long wavelength in a quantum dot nanostructure

The giant Kerr nonlinearity with reduced linear and nonlinear absorption in a four-level quantum dot by employing the tunnel coupling is investigated. It is shown that by enhancement of tunnel coupling value the Kerr nonlinearity increases and at the same time linear and nonlinear absorption reduces at the long wavelength which is very important for communicational applications. Enhanced of Kerr nonlinearity in a double quantum dots is investigated. It is found that the electron tunneling has an essential role to reducing the linear absorption and increasing the Kerr nonlinearity at long wavelength.     

Investigation of a mutual interaction force at different pressure amplitudes in sulfuric acid

This paper investigates the secondary Bjerknes force for two oscillating bubbles in various pressure amplitudes in a concentration of 95% sulfuric acid.The equilibrium radii of the bubbles are assumed to be smaller than 10 μm at a frequency of 37 kHz in various strong driving acoustical fields around 2.0 bars (1 bar=10 5 Pa).The secondary Bjerknes force is investigated in uncoupled and coupled states between the bubbles,with regard to the quasi-adiabatic model for the bubble interior.It finds that the value of the secondary Bjerknes force depends on the driven pressure of sulfuric acid and its amount would be increased by liquid pressure amplitude enhancement.The results show that the repulsion area of the interaction force would be increased by increasing the driven pressure because of nonlinear oscillation of bubbles.     

Crack Tip Opening Angle as a Fracture Resistance Parameter to Describe Ductile Crack Extension and Arrest in Steel Pipes under Service Pressure

The angle between two element sides representing the crack tip is defined as the crack tip opening angle (CTOA). Its critical value is used as a criterion of fracture resistance for characterizing stable tearing in thin metallic materials. Various methods are used for determination of the CTOA. Optical microscopy is one of the most common methods as well as fitting of experimental load-displacement diagrams by the finite element method (DIC). Additionally, analytical analysis using the experimental load-displacement curve method (SSM) derived from the plastic hinge model of deflection in three-point bending of a ductile specimen is applied. This approach assumes a constant rotation centre distance. Values of CTOA for API 5L X65 pipe steel found by three methods—DIC, CNM, and SSM—are given. Values of CTOA given by these three methods are similar and close to 20°. A discussion on the different parameters used to characterize the fracture resistance of running cracks in a pipe under service pressure is presented. The energy of fracture at impact determined by Charpy or drop-weight tear test (DWTT) tests and the critical J energy parameter are considered as well as the yield locus after damage, cohesive zone energy, and CTOA is another approach. One notes that CTOA is assumed to be constant during stable crack extension and decreases linearly with crack length during the instable and primary phase. A numerical technique to describe a ductile running crack using the node release technique and using CTOA as the fracture resistance criterion is presented. This method is compared with three different two-curve methods (TCMs): the Battelle, high strength line pipe (HLP), and HLP-Sumitomo methods. The Batelle TCM, as the oldest method, based on Charpy energy, gives a strongly conservative prediction. Predictions by the CTOA method are close to those obtained by the HLP-Sumitomo one.     

Relativistic Oscillators in a Noncommutative Space and in a Magnetic Field

In this work, we study the relativistic oscillators in a noncommutative space and in a magnetic field. It is shown that the effect of the magnetic field may compete withthat of the noncommutative space and that is able to vanish the effect of the noncommutative space.     

Thermodynamics and Phase Transition of Topological Dilatonic Lifshitz-Like Black Holes

It is known that scalar-tensor gravity models can be studied in Einstein and Jordan frames. In this paper, a model of scalar-tensor gravity in Einstein's frame is considered to calculate the Lifshitz-like black hole solutions with different horizon topologies. Thermodynamic properties and first order van der Waals-like phase transition are studied, and it is found that the Lifshitz parameter affects the phase structure. In addition, thermal stability is investigated by using the behavior of heat capacity and various methods of geometrical thermodynamics.     

Carbonate adsorption on goethite in competition with phosphate

Competitive interaction of carbonate and phosphate on goethite has been studied quantitatively. Both anions are omnipresent in soils, sediments, and other natural systems. The PO4-CO3 interaction has been studied in binary goethite systems containing 0-0.5 M (bi)carbonate, showing the change in the phosphate concentration as a function of pH, goethite concentration, and carbonate loading. In addition, single ion systems have been used to study carbonate adsorption as a function of pH and initial (H)CO3 concentration. The experimental data have been described with the charge distribution (CD) model. The charge distributions of the inner-sphere surface complexes of phosphate and carbonate have been calculated separately using the equilibrium geometries of the surface complexes, which have been optimized with molecular orbital calculations applying density functional theory (MO/DFT). In the CD modeling, we rely for phosphate on recent parameters from the literature. For carbonate, the surface speciation and affinity constants have been found by modeling the competitive effect of CO3 on the phosphate concentration in CO3-PO4 systems. The CO3 constants obtained can also predict the carbonate adsorption in the absence of phosphate very well. A combination of inner- and outer-sphere CO3 complexation is found. The carbonate adsorption is dominated by a bidentate inner-sphere complex, (FeO)2CO. This binuclear bidentate complex can be present in two different geometries that may have a different IR behavior. At a high PO(4) and CO3 loading and a high Na+ concentration, the inner-sphere carbonate complex interacts with a Na+ ion, probably in an outer-sphere fashion. The Na+ binding constant obtained is representative of Na-carbonate complexation in solution. Outer-sphere complex formation is found to be unimportant. The binding constant is comparable with the outer-sphere complexation constants of, e.g., SO(2-)4 and SeO(2-)4.     

Hydrolytic degradation of POSS-PEG-lactide hybrid hydrogels

A polyhedral oligomeric silsesquioxane (POSS), functionalized with eight arms of poly(ethylene glycol) (PEG; MW 400) and then acrylated, was incorporated into a hydrogel network based on triblock copolymers of poly(lactide-b-ethylene glycol-b-lactide) diacrylates using a redox-initiated polymerization. The organic-inorganic hybrid hydrogels so prepared contained the inorganic crosslinker POSS from 1 to 28 wt.%. The degradation properties of the hydrogels in a pH 7.4 phosphate-buffered saline solution at 37 °C were studied using measurements of mass loss, cryogenic SEM, and ATR-FTIR spectroscopy. It was found that copolymerization of acrylated 1kPEG-lactide with increasing amounts of POSS created a more porous network which was more resistant to hydrolysis. The ATR-FTIR technique was used to monitor the progress of degradation with exposure time through the changes in the carbonyl and C-H deformation bands of the lactide and the Si-C stretching band of the POSS. Increasing POSS incorporation resulted in decreased rate of degradation due to its hydrophobic nature and inertness to hydrolysis. Conversely, an increase in lactide content increased the degradation rate due to the increased number of hydrolytically-sensitive ester groups in the network.     

Electrochemical determinations of 6-mercaptopurine on the surface of a carbon nanotube-paste electrode modified with a cobalt salophen complex

A mixture of multi-walled carbon nanotube/graphite paste electrode modified with a salophen complex of cobalt was prepared and was applied for the study of the electrochemical behavior of 6-mercaptopurine (MP) using cyclic and differential pulse voltammetry (DPV). An excellent electrocatalytic activity toward the oxidation of MP was achieved, which led to a considerable lowering in the anodic overpotential and remarkable increase in the response sensitivity in comparison with unmodified electrode. Utilizing DPV method, a linear dynamic range of 1–100 μM with detection limit of 0.1 μM was obtained in phosphate buffer of pH 3.0. The electrochemical detection system was very stable, and the reproducibility of the electrode response, based on the six measurements during 1 month, was less than 3.0% for the slope of the calibration curves of MP. The electrochemical method as a simple, sensitive, and selective method was developed for the determination of MP in pharmaceutical dosage form and human plasma without any treatments.