Imprinted ZnO nanostructure-based electrochemical sensing of calcitonin: A clinical marker for medullary thyroid carcinoma

The present work describes an exciting method for the selective and sensitive determination of calcitonin in human blood serum samples. Adopting the surface molecular imprinting technique, a calcitonin-imprinted polymer was prepared on the surface of the zinc oxide nanostructure. Firstly, a biocompatible tyrosine derivative as a monomer was grafted onto the surface of zinc oxide nanostructure followed by their polymerization on vinyl functionalized electrode surface by activator regenerated by electron transfer–atom transfer radical polymerization (ARGET–ATRP) technique. Such sensor can predict the small change in the concentration of calcitonin in the human body and it may also consider to be as cost-effective, renewable, disposable, and reliable for clinical studies having no such cross-reactivity and matrix effect from real samples. The morphologies and properties of the proposed sensor were characterized by scanning electron microscopy, cyclic voltammetry, difference pulse voltammetry and chronocoulometry. The linear working range was found to be 9.99 ng L⁻¹ to 7.919 mg L⁻¹ and the detection limit as low as 3.09 ± 0.01 ng L⁻¹ (standard deviation for three replicate measurements) (S/N = 3).     

Review of the preparation,characterization, and luminescence properties of Pr3+-doped CaTiO3 phosphors

Research on Chemical Intermediates - In this paper we review the luminescence properties of Pr3+-doped CaTiO3 phosphors, the different methods of sample preparation, and characterization of the...     

Effect of heterocyclic ring system on formation of dimeric quinolones under catalyst-free conditions: a green approach

The intermediate-dependent green and efficient synthesis of dimeric quinolones 4a–l and 7a–l by the Knoevenagel condensation followed by Michael-type addition of 4-hydroxy-1-methylquinolin-2(1H)-one 1a, b to indole-3-aldehydes 2a–f and aromatic aldehydes 5a–l in water through the condensed compound 3a–l under catalyst-free conditions is described. This reaction was found to be environmentally friendly, has easy-workup and shorter reaction times giving good yields of the product without the need for its isolation using column chromatography.     

Mild generation of selenolate nucleophiles by thiol reduction of diselenides: convenient syntheses of selenyl-substituted aryl aldehydes

Various selenyl-substituted aryl aldehydes were obtained using dithiothreitol (DTT) as a reducing agent for diselenides in the presence of a base. For electron-deficient haloaryl aldehydes, a weak base, such as K₂CO₃, performed well. However, for electron-rich haloaryl aldehydes, a stronger base, such as 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU), was required for successful substitution. The selenyl-substitution of heteroaryl substrates were also investigated to obtain satisfactory yields of the desired products.     

Detection and identification of alkylphosphonic acids by positive electrospray ionization tandem mass spectrometry using a tricationic reagent

The retrospective detection and identification of degradation products of chemical warfare agents are of immense importance in order to prove their spillage and use. A highly sensitive liquid chromatography/electrospray ionization tandem mass spectrometric (LC/ESI-MS/MS) method--using an imidazolium-based tricationic reagent--was developed for the detection and identification of the anionic degradation products of nerve agents. A commercially available solution of 1,3-imidazolium-bis-(1-hexylbenzylimidazolium) trifluoride (IBHBI) formed adducts with alkylphosphonic acids (APAs), allowing detection of the APAs by positive mode ESI-MS. Tandem mass spectrometry was used for the unambiguous identification of the APAs. Parameters influencing the formation and stability of these adduct during mass spectrometric analysis, such as solvent composition, concentration of IBHBI, effect of pH and interferences by salts, were optimized. The absolute limits of detection (0.1 ng) for achieved for the APAs were better than those previously reported, and linear dynamic ranges of 10-2000 ng mL(-1) were achieved. The method was repeatable with a relative standard deviation ≤7.3%. APAs present in aqueous samples provided by the Organization for the Prohibition of Chemical Weapons during the 22(nd) and 24(th) Official Proficiency tests were detected and identified as IBHBI adducts. The added advantage of this method is that low-mass analytes are detected at higher mass, thus obviating the problem with background noise at low mass.     

Gas chromatography-electron ionization-mass spectrometry analysis of O,O'- dialkyl methylphosphonites for verification analysis of the Chemical Weapons Convention

Gas chromatography-mass spectrometry (GC-MS) analysis of O,O'-dialkyl methylphosphonites (DAMPs) was carried out with a view to developing a database and understanding the mechanism of fragmentation. DAMPs are included in the list of schedule 2B4 chemicals of the Chemical Weapons Convention. GC-MS analysis of DAMPs and their deuterated analogs revealed that their fragmentations were dominated by α-cleavages, alkenyl radical loss and hydrogen rearrangements. Based on fragment ions of deuterated analogs and density functional theory calculations, the fragmentation routes were rationalized.     

Synthesis and characterization of Eu doped SrY2O4 phosphor

The present paper reports that TL glow curve and kinetic parameter of Eu³⁺ doped SrY₂O₄ phosphor irradiated by beta source. Sample was prepared by solid state preparation method. Sample was characterized by XRD analysis and particle size was calculated by Debye–Scherrer formula. The sample was irradiated with Sr-90 beta source giving a dose of 10 Gy and the heating rate used for TL measurements are 6.7 °C/s. The samples display good TL peaks at 106 °C, 225 °C and 382 °C. The corresponding kinetic parameters are calculated. The photoluminescence excitation spectrum at 247 and 364 nm monitored with 400 nm excitation and the corresponding emission peaks at 590, 612 and 624 nm are reported.     

Investigation of the Effect of Substituents on Electronic and Charge Transport Properties of Benzothiazole Derivatives

A series of new benzothiazole-derived donor–acceptor-based compounds (Comp1–4) were synthesized and characterized with the objective of tuning their multifunctional properties, i.e., charge transport, electronic, and optical. All the proposed structural formulations (Comp1–4) were commensurate using FTIR, ¹H NMR, ¹³C NMR, ESI-mass, UV–vis, and elemental analysis techniques. The effects of the electron-donating group (-CH₃) and electron-withdrawing group (-NO₂) on the optoelectronic and charge transfer properties were studied. The substituent effect on absorption was calculated at the TD-B3LYP/6-31+G** level in the gas and solvent phases. The effect of solvent polarity on the absorption spectra using various polar and nonpolar solvents, i.e., ethanol, acetone, DMF, and DMSO was investigated. Light was shed on the charge transport in benzothiazole compounds by calculating electron affinity, ionization potential, and reorganization energies. Furthermore, the synthesized compounds were used to prepare thin films on the FTO substrate to evaluate the charge carrier mobility and other related device parameters with the help of I-V characteristic measurements.     

Bimetallic TiO2 Nanoparticles for Lignin-Based Model Compounds Valorization by Integrating an Optocatalytic Flow-Microreactor

The challenge of improving the activity of TiO₂ by modifying it with metals and using it for targeted applications in microreactor environments is an active area of research. Recently, microreactors have emerged as successful candidates for many photocatalytic reactions, especially for the selective oxidation process. The current work introduces ultrasound-assisted catalyst deposition on the inner walls of a perfluoro-alkoxy alkane (PFA) microtube under mild conditions. We report Cu-Au/TiO₂ and Fe-Au/TiO₂ nanoparticles synthesized using the sol–gel method. The obtained photocatalysts were thoroughly characterized by UV–Vis diffuse-reflectance spectroscopy (DRS), high-resolution scanning electron microscopy (HR-SEM), high-resolution transmission electron microscopy (HR-TEM), X-ray diffraction analysis (XRD), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and N₂ physisorption. The photocatalytic activity under UV (375 nm) and visible light (515 nm) was estimated by the oxidation of lignin-based model aromatic alcohols in batch and fluoropolymer-based flow systems. The bimetallic catalyst exhibited improved photocatalytic selective oxidation. Herein, four aromatic alcohols were individually investigated and compared. In our experiments, the alcohols containing hydroxy and methoxy groups (coniferyl and vanillin alcohol) showed high conversion (93% and 52%, respectively) with 8% and 17% selectivity towards their respective aldehydes, with the formation of other side products. The results offer an insight into ligand-to-metal charge transfer (LMCT) complex formation, which was found to be the main reason for the activity of synthesized catalysts under visible light.