Miniaturization of GPS patch antennas based on novel dielectric ceramics Zn(1−x)MgxAl2O4 by sol–gel method

The need for miniaturization and weight reduction of GPS patch antennas has prompted the search for new microwave dielectric materials. In this study, a sol–gel method was used to prepare Zn_(1?x)Mg_xAl₂O₄ thin films and fabricate GPS patch antennas at a low annealing temperature (700 °C). X-ray diffraction (XRD) patterns, field emission scanning electron microscopy images, Fourier transform infrared spectra, and optical band gap analyses confirmed the nanostructure of (Mg/Zn)Al₂O₄. The XRD patterns displayed the characteristic peaks of (Mg/Zn)Al₂O₄ with a face-centered cubic structure. Mg addition decreased the crystallite size, surface morphology, and lattice parameters of the resultant films, evidently affecting their density and dielectric constant (? _r ). Based on the material investigated and microwave antenna theory, GPS patch antennas were fabricated using Zn_(1?x)Mg_xAl₂O₄ and then studied using a PNA series network analyzer. The fabricated patch antennas with different ? _r ceramics decreased in size from 12.5 to 10.8 cm². The patch antennas resonated at a frequency of 1.570 GHz and provided a return loss bandwidth between ?16.6 and ?20.0 dB; their bandwidth also improved from 90 to 255 MHz. The GPS patch antenna fabricated from Zn_0.70Mg_0.30Al₂O₄ showed an excellent combination of return loss (?20.0 dB), small size (10.8 cm²), and wide bandwidth (255 MHz). Therefore, addition of Mg improves antenna performance and decreases the dimensions of the device.     

Environmentally Benign Synthesis of 2-Pyrazolines and Cyclohexenones Incorporating Naphthalene Moiety and Their Antimicrobial Evaluation

We reported the environmental benign synthesis of chalcones,2-pyrazolines and cyclohexanones under microwave irradiation.Chalcones were obtained by the condensation of each of 2-hydroxyacetophenone derivatives with a-naphthaldehyde under microwave irradiation.The condensation reactions of each of synthesized chalcones with phenyl hydrazine under microwave irradiation in the presence of dry acetic acid as a cyclizing agent gave 2-pyrazolines.Also,the new cyclohexenone derivatives,valuable intermediates to synthesize fused heterocycles,have been prepared by the cyclocondensation of each of hydroxychalcones with ethyl acetoacetate.The structures of the synthesized compounds were elucidated by infrared（IR） spectrometry,nuclear magnetic resonance（NMR）,mass spectrometry（MS） and elmental analysis.The results indicate that unlike classical heating,microwave irradiation results in higher yields with shorter and cleaner reactions.The synthesized compounds were screened for antimicrobial activity against Staphylococcus aureus,Escherichia coli,Candida Albicans and Aspergillus niger.We clarified the effects of different substituents in the tested compounds on the obtaind antibacterial activities and antifungal activities.     

Fast and efficient immunoaffinity column cleanup and liquid chromatography–tandem mass spectrometry method for the quantitative analysis of aflatoxins in baby food and feeds

An ultra high performance liquid chromatography‐tandem mass spectrometric method has been developed for the highly sensitive and selective determination of regulated aflatoxins. The extraction of aflatoxins from baby food matrices were performed using liquid–liquid extraction procedure followed by immunoaffinity column cleanup. The higher sensitivity for the determination of target aflatoxins was fulfilled by applying a preconcentration step with immunoaffinity columns after acetonitrile–water extraction. The enhanced selectivity was attained with the triple quadrupole mass analyzer operated in electrospray positive ionization mode. Method validation was tested in five different baby food matrices by recovery experiments. Satisfactory recoveries, between 92 and 103%, with relative standard deviations lower than 8% were achieved in all the tested matrices. The proposed method was found to be specific as no interference peaks were observed for blank samples. The limit of detection of the method was found to be in the range of 0.003–0.008 ng/mL. The validated method was fruitfully applied to the screening of aflatoxins in baby foods and feeds sample retailed in local markets of Riyadh, Saudi Arabia. The obtained levels of all analyzed aflatoxins were below the regulation limits set by European Agency.     

Enzyme-free impedimetric glucose sensor based on gold nanoparticles/polyaniline composite film

A non-enzymatic impedimetric glucose sensor was fabricated based on the adsorption of gold nanoparticles (GNPs) onto conductive polyaniline (PANI)-modified glassy carbon electrode (GCE). The modified electrode (GCE/PANI/GNPs) was characterized by using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and scanning electron microscopy (SEM). The determination of glucose concentration was based on the measurement of EIS with the mediation of electron transfer by ferricyanide ([Fe(CN)₆]^3?). The [Fe(CN)₆]^3? is reduced to ferrocyanide ([Fe(CN)₆]^4?), which in turn is oxidized at GCE/PANI/GNPs. An increase in the glucose concentration results in an increase in the diffusion current density of the [Fe(CN)₆]^4? oxidation, which corresponds to a decrease in the faradaic charge transfer resistance (R _ct). A wide linear concentration range from 0.3 to 10 mM with a lower detection limit of 0.1 mM for glucose was obtained. The proposed sensor shows high sensitivity, good reproducibility, and stability. In addition, the sensor exhibits no interference from common interfering substances such as ascorbic acid, acetaminophen, and uric acid.     

Decomposition behaviors of various crystalline celluloses as treated by semi-flow hot-compressed water

Various types of crystalline cellulose consisting of group I (cell I, III_I, IV_I) and group II (cell II, III_II, IV_II) prepared from cotton linter were adjusted for their degree of polymerization (DP) as starting materials. These celluloses were then treated by semi-flow hot-compressed water (HCW) at 230–270 °C/10 MPa/2–15 min to study their decomposition behaviors. The treatments performed resulted in residues of celluloses and water-soluble (WS) portions. Consequently, the crystallinity of the residues was found to remain the same, but the DP was reduced as the temperature increased. Additionally, X-ray diffractometry and Fourier transform-infrared analyses demonstrated that crystallographic changes occurred for residues of cell III_I, IV_I and III_II. Despite these changes, the overall results of the residues showed that group I has higher resistance to decomposing than group II. As for the WS portions, the yields of the hydrolyzed and degraded products were higher in group II than group I, indicating that group II is less resistant to decomposition by HCW treatment. Results for both the residues and WS portions are in agreement with each other, showing that the degree of difficulty of decomposition was higher in group I than group II. Therefore, the decomposition behaviors of the celluloses are due to differences in the crystalline forms.     

Physicochemical Investigation of HDDP Azomethine Dye as Turn-On Fluorescent Chemosensor for High Selectivity and Sensitivity of Al<Superscript>3+</Superscript> Ions

4-[(2-Hydroxy-naphthalen-1-ylmethylene)-amino]-1,5-dimethyl-2-phenyl-1,2-dihydro-pyrazol-3-one (HDDP) was synthesized by the reaction of 4-amino-1,5-dimethyl-2-phenyl-1,2-dihydro-3H-pyrazol-3-one with 2-hydroxy-l-naphthaldehyde. The structure was confirmed by the IR, ¹H-NMR, ¹³C-NMR, and EI-MS spectra and elemental analysis. Physicochemical parameters of the HDDP such as extinction coefficient, oscillator strength, transition dipole moment, Stokes shift, and fluorescence quantum yield in different solvents were studied on the basis of polarities. The interactions of various metal ions with HDDP were also studied using steady state fluorescence measurements. The emission profile reveals that it acts as off–on type fluorescent chemosensor for selective and sensitive detection of Al³⁺ ions. Complexation stoichiometry and mechanism of enhancement were determined from a Benesi–Hildebrand plot.     

Electrical and electrochemical characteristics of La<Subscript>0.6</Subscript>Sr<Subscript>0.4</Subscript>CoO<Subscript>3-δ</Subscript> cathode materials synthesized by a modified citrate-EDTA sol-gel method assisted with activated carbon for proton-conducting solid oxide fuel cell application

The electrical conductivity and electrochemical performance of a La_0.6Sr_0.4CoO_3-δ (LSC) cathode produced by a modified citrate-EDTA sol-gel method assisted with activated carbon are characterized for a proton-conducting solid oxide fuel cell (H⁺??SOFC) application at intermediate temperature. Thermogravimetric analysis revealed that the decomposition of the unrequired intermediate compounds in the precalcined powder was completed at 800?°C. A single LSC perovskite phase was formed at a calcination temperature of 900?°C, as confirmed by X-ray diffraction analysis. The particle size, crystallite size, and BET-specific surface area of the powder are 219–221?nm, 18?nm, and 9.87?m²?g^?1, respectively. The high index value of the extent of agglomeration (5.53) showed that the powder was barely agglomerated. Bulk LSC sintered at 1200?°C for 2?h showed the highest direct-current electrical conductivity (σ_d.c) compared to that of bulk LSC sintered at 1000?°C and 1100?°C. The value of σ_d.c was affected by the density and porosity of the sintered samples. The area specific resistance (ASR) of screen-printed LSC working on a proton conductor of BaCe_0.54Zr_0.36Y_0.1O_2.95 (BCZY) decreased from 5.0?Ω?cm²–0.06?Ω?cm² as the temperature increased from 500?°C to 800?°C with an activation energy of 1.079?eV. Overall, in this work, the LSC material produced with the aid of activated carbon meet the requirements for the application as a cathode in an intermediate temperature H⁺-SOFC.

Open image in new window

     

Exploring the Role of Surface States in Emissive Carbon Nanodots: Analysis at Single-Particle Level

Fluorescent carbon nanodots (CDs) have been highlighted as promising semiconducting materials due to their outstanding chemical and optical properties. However, the intrinsic heterogeneity of CDs has impeded a clear understanding of the mechanisms behind their photophysical properties. In this study, as-prepared CDs are fractionated via chromatography to reduce their structural and chemical heterogeneity and analyzed through ensemble and single-particle spectroscopies. Many single particles reveal fluorescence intensity fluctuations between two or more discrete levels with bi-exponential decays. While the intrinsic τ₁ components are uniform among single particles, the τ₂ components from molecule-like emissions spans a wider range of lifetimes, reflecting the inhomogeneity of the surface states. Furthermore, it is concluded that the relative population and chemical states of surface functional groups in CDs have a significant impact on emissive states, brightness, blinking, stability, and lifetime distribution of photoluminescence.     

Functional Properties and Molecular Degradation of Schizostachyum Brachycladum Bamboo Cellulose Nanofibre in PLA-Chitosan Bionanocomposites

The degradation and mechanical properties of potential polymeric materials used for green manufacturing are significant determinants. In this study, cellulose nanofibre was prepared from Schizostachyum brachycladum bamboo and used as reinforcement in the PLA/chitosan matrix using melt extrusion and compression moulding method. The cellulose nanofibre(CNF) was isolated using supercritical carbon dioxide and high-pressure homogenisation. The isolated CNF was characterised with transmission electron microscopy (TEM), FT-IR, zeta potential and particle size analysis. The mechanical, physical, and degradation properties of the resulting biocomposite were studied with moisture content, density, thickness swelling, tensile, flexural, scanning electron microscopy, thermogravimetry, and biodegradability analysis. The TEM, FT-IR, and particle size results showed successful isolation of cellulose nanofibre using this method. The result showed that the physical, mechanical, and degradation properties of PLA/chitosan/CNF biocomposite were significantly enhanced with cellulose nanofibre. The density, thickness swelling, and moisture content increased with the addition of CNF. Also, tensile strength and modulus; flexural strength and modulus increased; while the elongation reduced. The carbon residue from the thermal degradation and the glass transition temperature of the PLA/chitosan/CNF biocomposite was observed to increase with the addition of CNF. The result showed that the biocomposite has potential for green and sustainable industrial application.     

Labelling of castor oil for myocardial study

The labelling of castor oil, hydrolyzed castor oil and oleic acid by iodine monochloride and chloramine-T has been investigated. The effect of iodinating agent and concentration of castor oil on labelling yield has been studied. A comparative pharmacological study with analogous aliphatic fatty acids was caried out. Castor oil labelled with iodine monochloride concentrates in heart and liver in good proportion, better than other natural fatty acids and nearly equal to analogous fatty acids. Infrared study revealed that the OH group in ricinoleic acid may protect the¹²⁵I added across the double bond with minor changes in biochemical properties and better extraction by the muscle of the heart.