Tetrakis(bicyclo[2.2.2]oct‐2‐ene)‐Fused Calix[4]pyrrole

Tetrakis(bicyclo[2.2.2]oct‐2‐ene)‐fused calix[4]pyrrole, 5 , was obtained starting from (E)‐1,2‐bis(phenylsulfonyl)ethylene. This new calixpyrrole derivative is the prospective precursor of tetrabenzocalix[4]pyrrole, a potential ion‐pair receptor and an attractive species as a possible deep‐walled ‘molecular container’.     

Facile and convenient synthesis of new thieno[2,3-b]-thiophene derivatives

A facile and convenient synthesis of bis(2-(1H-benzo[d]imidazol-2(3H)-ylidene)-3-oxopropanenitrile), bis((3-amino-5-(methylthio)-1H-pyrazol-4-yl)methanone) and bis(2-thioxo-1,2-dihydropyrimidine-5-carbonitrile) derivatives incorporating a thieno- [2,3-b]thiophene moiety via versatile, readily accessible diethyl 3,4-dimethylthieno-[2,3-b]thiophene-2,5-dicarboxylate is described.     

Reinforcement of natural rubber/high density polyethylene blends with electron beam irradiated liquid natural rubber-coated rice husk

Coating of rice husk (RH) surface with liquid natural rubber (LNR) and exposure to electron beam irradiation in air were studied. FTIR analysis on the LNR-coated RH (RHR) exposed to electron beam (EB) showed a decrease in the double bonds and an increase in hydroxyl and hydrogen bonded carbonyl groups arising from the chemical interaction between the active groups on RH surface with LNR. The scanning electron micrograph showed that the LNR formed a coating on the RH particles which transformed to a fine and clear fibrous layer at 20 kGy irradiation. The LNR film appeared as patches at 50 kGy irradiation due to degradation of rubber. Composites of natural rubber (NR)/high density polyethylene (HDPE)/RHR showed an optimum at 20–30 kGy dosage with the maximum stress, tensile modulus and impact strength of 6.5, 79 and 13.2 kJ/m², respectively. The interfacial interaction between the modified RH and TPNR matrix had improved on exposure of RHR to e-beam at 20–30 kGy dosage.     

Spectrofluorimetric determination of fexofenadine hydrochloride in pharmaceutical preparation using silver nanoparticles

A novel sensitive fluorimetric method was investigated for the assay of fexofenadine hydrochloride (FEX) using silver nanoparticles (NPs) as a fluorescence probe. The NPs, which were prepared by chemical reduction of silver nitrate with sodium borohydride (reducing agent) in aqueous solution (without organic stabilizers) were water soluble, stable and had narrow emission band. The addition of drug to NPs solution caused considerable quenching of the emission band of silver NPs, which was likely due to the complexation of the drug to silver NPs. Under the optimum conditions, the quenched fluorescence (FL) intensity was linear with the concentration of FEX in the range of 1 × 10^?7 to 2.5 × 10^?5 mol L^?1 (0.9985) with a detection limit of 1.2 × 10^?8 mol L^?1. The quenching mechanism of the studied drug on the emission band of silver NPs was explained by Stern–Volmer law. The developed method was applied to FEX determination in a pharmaceutical formulation (allegra tablets) and biological fluids (human serum and urine).     

Enzyme-free impedimetric glucose sensor based on gold nanoparticles/polyaniline composite film

A non-enzymatic impedimetric glucose sensor was fabricated based on the adsorption of gold nanoparticles (GNPs) onto conductive polyaniline (PANI)-modified glassy carbon electrode (GCE). The modified electrode (GCE/PANI/GNPs) was characterized by using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and scanning electron microscopy (SEM). The determination of glucose concentration was based on the measurement of EIS with the mediation of electron transfer by ferricyanide ([Fe(CN)₆]^3?). The [Fe(CN)₆]^3? is reduced to ferrocyanide ([Fe(CN)₆]^4?), which in turn is oxidized at GCE/PANI/GNPs. An increase in the glucose concentration results in an increase in the diffusion current density of the [Fe(CN)₆]^4? oxidation, which corresponds to a decrease in the faradaic charge transfer resistance (R _ct). A wide linear concentration range from 0.3 to 10 mM with a lower detection limit of 0.1 mM for glucose was obtained. The proposed sensor shows high sensitivity, good reproducibility, and stability. In addition, the sensor exhibits no interference from common interfering substances such as ascorbic acid, acetaminophen, and uric acid.     

Synthesis of the possible carcinogenic dihydrodiol and diol epoxide of phthalazine

Inverse-Diels-Alder reaction of dimethyl 1,2,4,5-tetrazine-3,6-dicarboxylate with benzene cis-diol gave dihydrodiol containing the 1,4-dihydropyridazine ring. Attempts at oxidation of the dihydropyridazine ring with PIFA and MnO₂ resulted in the formation of 5- and 5,6-dihydroxy-phthalazine derivatives. The oxidation of the dihydropyridazine ring was achieved by way of photooxygenation. The phthalazine type dihydrodiol is unstable and easily undergoes aromatization. The Diels-Alder reaction of tetrazine with cyclohexadiene acetonide and epoxy-ketal cyclohexene as a dienophile was investigated. These reactions led to the possible carcinogenic phthalazine type of dihydrodiol and diol epoxide where the hydroxyl groups are protected.     

Time‐Varying Flexible Least Squares for Thermal Desorption of Gases

Time‐varying linear regression via flexible least squares is used to determine temperature‐dependent kinetic parameters during low‐pressure, steady‐state, temperature‐programmed desorption from catalytic surfaces. The flexible least squares approach optimizes time‐varying parameters by minimizing dynamic and measurement discrepancies between a linear theoretical model and experimental data using linear regression. The effectiveness of this approach is demonstrated by calculation of accurate temperature‐dependent activation energies, preexponential factors, and differential conversion functions for the evolution of 3‐methyl‐2‐oxetanone (β‐lactone) during the selective oxidation of isobutane over aluminum phosphomolybdates.     

Silver(I)‐N‐heterocyclic carbene complexes of bis‐imidazol‐2‐ylidenes having different aromatic‐spacers: synthesis,crystal structure,and in vitro antimicrobial and anticancer studies

A series of Ag(I) complexes ( 6 , 7 , 8 , 9 ) derived from imidazol‐2‐ylidenes was synthesized by reacting Ag₂O with an o‐, m‐, p‐xylyl or 1,3,5‐triazine‐linked imidazolium salts ( 1 , 2 , 3 , 4 ) and then characterizing these using various spectro‐analytical techniques. Additionally, triazine‐linked bis‐imidazolium salt 5 was characterized using the single‐crystal X‐ray diffraction method. Complexes 6–9 were formed from the N‐heterocyclic carbene ligand precursors 1–3 as PF₆^‐ salts in good yields. Conversely, salt 5 does not form Ag(I) complex even under various reaction conditions. Using ampicillin as a standard, complexes 6–9 were tested against bacteria strains Escherichia coli and Staphylococcus aureus as Gram‐negative and Gram‐positive bacteria, respectively, showing potent antimicrobial activities against the tested bacteria even at minimum inhibition concentration and bacterial concentration levels. Furthermore, the potential anticancer activities of the reported complexes were evaluated against the human colorectal cancer (HCT 116) cell lines, using 5‐fluorouracil as a standard drug. The highest anticancer activities were observed for complex 8 with an IC₅₀ value of 3.4 μm , whereas the lowest was observed for complex 9 with an IC₅₀ value of 18.1 μm . Copyright © 2013 John Wiley & Sons, Ltd.     

Effects of quantum confined stark effect and well thickness on optical properties of double quantum wells violet InGaN laser diodes

The effects of quantum confined stark effect (QCSE) and quantum well (QW) thickness on the optical properties of violet InGaN laser diodes (LDs) have numerically been investigated. The simulation results indicated that the QCSE greatly effects the optical properties of LDs, where QCSE relates to the QW thickness and it increases when the QW thickness is wider which leads to deteriorating of the optical proprieties of the violet InGaN LD. The polarization in the active region of the InGaN LD has been estimated by the blue shift of the wavelength and it is found that the blue shift of the wavelength depends on the QW thickness. The major simulation result has shown that the best properties of violet InGaN LD can be obtained with smaller QW thickness, where more carriers can be restricted, stayed and overlapped inside the QW which leads to a larger stimulated recombination rate and optical material gain which in turn increase the output power of the LD; while decreasing the threshold current of the LD.     

Synthesis and Characterization of Aminophosphines,Bis(amino)phosphine Derivatives,and Their Molybdenum(0) Complexes

Functionalized bis(amino)phosphines of the type PhP(NHR)₂ ( 1a–c ) and aminophosphines of the type Ph₂PNHR ( 2a–c ) have been synthesized by treating PhPCl₂ or Ph₂PCl with corresponding primary amines of H₂N-R where R = -CH₂SO₃H, -C₆H₄SO₃H, and benzo-15-crown-5. The molybdenum(0) complex of the aminophosphine ( 3 ) has been obtained by reacting cis-[Mo(CO)₄(bipy)] with aminophosphine ( 2c ). The synthesized aminophosphines, bis(amino)phosphines, and the molybdenum(0) complex have been characterized by IR, ¹H NMR, ³¹P NMR, and MS spectroscopic techniques and by elemental analysis.