Two-step upflow anaerobic sludge bed system for sewage treatment under subtropical conditions with posttreatment in waste stabilization ponds

A pilot-scale sewage treatment system consisting of two upflow anaerobic sludge bed (UASB) reactors followed by five waste stabilization ponds (WSPs) in series was studied under subtropical conditions. The first UASB reactor started up in only 1 mo (stable operation, high chemical oxygen demand [COD] removal efficiency, low volatile fatty acids concentration in the effluent, alkalinity ratio above 0.7, biogas production above 0.1 Nm3/kg of CODremoved). Removal efficiencies up to 90% were obtained in the anaerobic steps at a hydraulic retention time of 6 + 4 h (80% removal in the first step). Fecal coliform removal in the whole system was 99.9999% (99.94% in anaerobic steps and 99.98% in WSPs). COD balances over UASB reactors are provided. A minimum set of data necessary to build COD balances is proposed. Intermittent sludge washout was detected in the reactors with the COD balances. Sludge washout from single-step UASB reactors should be monitored and minimized in order to ensure constant compliance with discharge standards, especially when no posttreatment is provided. The system combined high COD and fecal coliform removal efficiency with an extremely low effluent concentration, complying with discharge standards, and making it an attractive option for sewage treatment in subtropical regions.     

Dynamic contact angle and spreading rate measurements for the characterization of the effect of dentin surface treatments

A new methodology capable of providing reliable and reproducible contact angle (theta) data has been employed to study the effect of clinical treatments grinding, acid etching, and deproteinization on medial dentin tissue. It is based on the application of the ADSA-CD algorithm to the determination of low-rate dynamic contact angles, obtained from slowly growing drops, and on contact angle measurement, as well as spreading behavior analysis, during the relaxation of the system (water on treated dentin) after initial drop growth. The theta data obtained were substantially more reproducible than those obtained with classical methods. A net effect of the treatment on theta was found, increasing dentin wettability: theta (polished) >theta (etched) >theta (deproteinized). The spreading rates correlate with the angles and are adequate for the dentin surface characterization. ANOVA and SNK tests show that for advancing contact angles the means corresponding to all treatments are significantly different. In the relaxing phase, mean angle and spreading rates on polished dentin differ significantly from those on etched and deproteinized dentin, but the latter do not differ significantly from each other.     

Determination of triclosan in foodstuffs

A reverse-phase high-performance liquid chromatographic (RP-HPLC) method coupled with an ultraviolet detector was developed to determine triclosan which had migrated into foodstuffs from packaging materials. The method includes extraction with hexane, followed by evaporation to dryness and residue re-dissolution in ACN 90%. Chromatographic separation was performed with a Kromasil 100 C18 column (15 cm x 0.4 cm ID, 5 microm particle size) at 30 degrees C and using ACN and water as mobile phases. Regarding recoveries, good results (higher than 83% and lower than 112%) were obtained for the three representative food matrixes selected (orange juice, chicken breast meat, and Gouda cheese).     

Phospholipid mesophases at solid interfaces: in-situ X-ray diffraction and spin-label studies

In this work, we report on recent investigations, both on the global and on the local molecular architecture of supported phospholipid model membranes. A brief theoretical introduction explains how global structural information on supramolecular lipid ensembles can be retrieved from surface X-ray diffraction measurements as well as how spin-label electron paramagnetic resonance spectroscopy (EPR) provides complementary information on the local environment of probe molecules. The combination of especially designed X-ray cells with the technique of small- and wide-angle X-ray surface scattering makes it possible to explore various fields of lipid research and its applications. Examples for different physico-chemical conditions are presented: (i) in situ chemistry under excess of water conditions demonstrating how solid-supported lipid films sense salinity, (ii) the 3D electron density reconstruction of a vesicle-fusion intermediate under controlled humidity, and (iii) complementary temperature and pressure effects on oriented phospholipid samples. Further, special attention has been given to the influence of different film preparation techniques with respect to quality and the defect structure manifestation. To resolve the proportions and local properties of defects in a hydrated lipid-deposited surface, spin-label EPR was applied. The results from 9.6 GHz EPR as well as from 1.2 GHz EPR suggest the alignment to be in the range between 30% and 80%. In addition, slow time-dependent EPR measurements point to nano-structural rearrangements due to water flow and reduction of alignment quality.     

Flexible square supramolecular rings with hydrogen-bonded bushing in solid-state oxalurate complexes: versatility of the oxalurate ligand in covalent and noncovalent binding

Isotypic pseudooctahedral complexes of Co, Ni, and Cu with two chelating oxalurate ligands and two water molecules, trans-[M(oxalurate)(2)(H(2)O)(2)], have been synthesized and isolated by a novel progressive crystallization technique. Diffraction analyses reveal that the three complexes form isotypic solid-state structures in which the molecular connectivity and complex network of noncovalent interactions are qualitatively identical throughout the series. The oxalurate groups form unbounded chains through two different self-recognition patterns-a typical DA-AD motif and an unusual DDA'-A'DD form (D = hydrogen bond donor, A' = double acceptor). The unsymmetrical oxalurate group possesses the topological properties necessary to form aggregates of higher symmetry, and the "M(oxalurate)(2)" fragments form a rhombic 2-D motif with hydrogen-bonded corners and with hydrogen-bond acceptors directed to the inside of the cyclic aggregate. The 2-D net is stacked to form a channeled 3-D structure, in which the coordinated aqua ligands form the principal interlayer interactions. The slanted channels are occupied by the axial waters and by waters of crystallization, which are hydrogen bonded to the channel walls to form an ordered bushing. The extensive 3-D hydrogen-bonded superstructure is flexible enough to accommodate the distortion produced by the Jahn-Teller effect in the copper compound without requiring a qualitative structural change. The bonds affected by Jahn-Teller distortion in the Cu complex [Cu-O = 2.3788(15) A] are significantly longer than their analogues in the Co and Ni complexes [Co-O = 2.175(2), Ni-O = 2.094(9) A].     

Potentiometric, luminescence and NMR study of the interaction of Eu with glyceryl phosphates

Complexation of europium(III) with glyceryl-1- and -2-phosphates has been studied by metal ion luminescence, ¹H and ¹³C NMR spectroscopy and potentiometry. From the luminescence and NMR studies, the formation of a 1:1 inner-sphere complex, in which the glyceryl phosphate is directly bound to the metal, is confirmed. Similar apparent binding constants at pH 2 were obtained by the three methods. Values obtained by NMR at pH 2 are 53 M⁻¹ and 12 M⁻¹ for glyceryl-1- and -2-phosphate, respectively. By comparison with literature data on related systems it is suggested that the ligands bind through the phosphate group. To obtain structural information from the NMR data, complexation has also been studied with the lanthanide ions Dy(III), Er(III) and Gd(III) using both chemical shift and relaxation data. From this, metal-proton distance ratios have been calculated. Comparison of ¹H and ¹³C NMR spectral data in the presence of paramagnetic lanthanides suggests conformational equilibria in the solutions. From the potentiometric studies, global formation constants have been determined, and speciation diagrams obtained over the pH range 1.5pH7.0 for ligand/metal ratios of 1 and 30. Implications of these results on lanthanide induced fusion of phospholipid membranes are discussed.     

The partial hydrogenation of benzene to cyclohexene by nanoscale ruthenium catalysts in imidazolium ionic liquids

The controlled decomposition of an Ru(0) organometallic precursor dispersed in 1-n-butyl-3-methylimidazolium hexafluorophosphate (BMI.PF(6)), tetrafluoroborate (BMI.BF(4)) or trifluoromethane sulfonate (BMI.CF(3)SO(3)) ionic liquids with H(2) represents a simple and efficient method for the generation of Ru(0) nanoparticles. TEM analysis of these nanoparticles shows the formation of superstructures with diameters of approximately 57 nm that contain dispersed Ru(0) nanoparticles with diameters of 2.6+/-0.4 nm. These nanoparticles dispersed in the ionic liquids are efficient multiphase catalysts for the hydrogenation of alkenes and benzene under mild reaction conditions (4 atm, 75 degrees C). The ternary diagram (benzene/cyclohexene/BMI.PF(6)) indicated a maximum of 1 % cyclohexene concentration in BMI.PF(6), which is attained with 4 % benzene in the ionic phase. This solubility difference in the ionic liquid can be used for the extraction of cyclohexene during benzene hydrogenation by Ru catalysts suspended in BMI.PF(6). Selectivities of up to 39 % in cyclohexene can be attained at very low benzene conversion. Although the maximum yield of 2 % in cyclohexene is too low for technical applications, it represents a rare example of partial hydrogenation of benzene by soluble transition-metal nanoparticles.     

Determination of lead in seawater by inductively coupled plasma optical emission spectrometry after separation and pre-concentration with cocrystallized naphthalene alizarin

An analytical method for separation and pre-concentration of lead in seawater for determination by inductively coupled plasma optical emission spectrometry has been investigated. Lead was retained in the solid phase (0.5 g) composed of co-precipitated naphthalene and alizarin red. The solid phase quantitatively sorbs Pb(II) at pH 8–9, and the metal was eluted using 5.0 ml of 2 mol l⁻¹ nitric acid. The effect of NaCl, KCl, BaCl₂, CaCl₂, Na₂SO₄, MgCl₂ and Na₃PO₄ on the sorption of Pb(II) in the solid phase was studied. A set of solutions containing varying amounts of electrolytes (0.5; 1.0; 3.0 and 5.0% m/v) with Pb (50 μg) was prepared and the recommended procedure applied. The Na₃PO₄ was found to interfere; the other electrolytes did not interfere up to 5% m/v. A pre-concentration factor of 40 was obtained in this analytical procedure. The limit of detection and limit of quantification for Pb(II) were 53 and 176 μg l⁻¹, respectively. Lead was determined in seawater samples collected in Salvador city, Bahia, Brazil. The precision, expressed as R.S.D., was 1.8–4.6%, and the recovery of lead added to seawater samples was 95–97%.     

Investigations of a novel process to the framework of benzo[c]cinnoline

A novel synthetic process leading to the framework of benzo[c]cinnoline has been discovered and investigated. The process is composed of two separate reactions, the first of which is a partial reduction of the nitro groups of the 2,2'-dinitrobiphenyl, a process that we believe proceeds via a SET mechanism to yield the hydroxyamino and nitroso groups. In the following step the cyclization takes place under formation of the -N=N- bond. We believe that this process take place via a radical mechanism through the nitroso radical anion. The novel process affords either benzo[c]cinnoline or benzo[c]cinnoline N-oxide, both in high yields, 93% and 91%, respectively. To obtain benzo[c]cinnoline, the reaction is conducted with an alcohol as solvent and an alkoxide as the base, while for benzo[c]cinnoline N-oxide, water is used as solvent with sodium hydroxide as the base. To establish the latter procedure, statistical experimental design and multivariate modeling were utilized to reveal the response surface for the reaction and to determine the optimal conditions for the reaction. A proposal for the complex reaction mechanism is given. During the corroboration of the mechanism, a new deoxygenation reaction for converting benzo[c]cinnoline N-oxide into benzo[c]cinnoline was discovered. The reaction is conducted by treating the N-oxide with sodium ethoxide at elevated temperature to achieve near-quantitative conversion into benzo[c]cinnoline in a yield of 96%.     

Determination of organophosphorus and triazine pesticides in olive oil by on-line coupling reversed-phase liquid chromatography/gas chromatography with nitrogen-phosphorus detection and an automated through-oven transfer adsorption-desorption interface

A method is described for the simultaneous determination of organophosphorus and triazine pesticides in olive oil, whereby reversed-phase liquid chromatography (LC) is coupled to gas chromatography by means of an automated through-oven transfer adsorption-desorption (TOTAD) interface. The olive oil needs to be filtered only before it is loaded into the liquid chromatograph, where preseparation of the pesticide residues from the other olive oil components is carried out by using methanol-water as the eluant. The LC fraction containing the pesticides is automatically transferred to the gas chromatograph by using the TOTAD interface, which almost totally eliminates the solvent, so that water-sensitive detectors such as the nitrogen-phosphorus detector can be used. Detection limits range from 0.07 to 0.38 microg/L for organophosphorus pesticides and from 6.0 to 7.0 microg/L for triazines. The results were compared with those obtained by flame ionization detection.