Syntheses and structures of magnesium pyridine thiolates--model compounds for magnesium binding in photosystem I

Novel magnesium pyridine-2-thiolates were prepared by using alkane elimination chemistry. The resulting complexes display a metal coordination environment composed of sulfur/nitrogen bonding from the intramolecularly stabilized mercaptopyridine ligand, in addition to coordination by the oxygen centers from two THF donors. The compounds are well-suited model compounds for the magnesium centers in Photosystem I, in which magnesium, situated in the central chlorophyll ligand, is bound to sulfur from a nearby methionine residue. All compounds were characterized by (1)H, (13)C NMR, and IR spectroscopy, in addition to Xray crystallography.     

Two-step upflow anaerobic sludge bed system for sewage treatment under subtropical conditions with posttreatment in waste stabilization ponds

A pilot-scale sewage treatment system consisting of two upflow anaerobic sludge bed (UASB) reactors followed by five waste stabilization ponds (WSPs) in series was studied under subtropical conditions. The first UASB reactor started up in only 1 mo (stable operation, high chemical oxygen demand [COD] removal efficiency, low volatile fatty acids concentration in the effluent, alkalinity ratio above 0.7, biogas production above 0.1 Nm3/kg of CODremoved). Removal efficiencies up to 90% were obtained in the anaerobic steps at a hydraulic retention time of 6 + 4 h (80% removal in the first step). Fecal coliform removal in the whole system was 99.9999% (99.94% in anaerobic steps and 99.98% in WSPs). COD balances over UASB reactors are provided. A minimum set of data necessary to build COD balances is proposed. Intermittent sludge washout was detected in the reactors with the COD balances. Sludge washout from single-step UASB reactors should be monitored and minimized in order to ensure constant compliance with discharge standards, especially when no posttreatment is provided. The system combined high COD and fecal coliform removal efficiency with an extremely low effluent concentration, complying with discharge standards, and making it an attractive option for sewage treatment in subtropical regions.     

Dynamic contact angle and spreading rate measurements for the characterization of the effect of dentin surface treatments

A new methodology capable of providing reliable and reproducible contact angle (theta) data has been employed to study the effect of clinical treatments grinding, acid etching, and deproteinization on medial dentin tissue. It is based on the application of the ADSA-CD algorithm to the determination of low-rate dynamic contact angles, obtained from slowly growing drops, and on contact angle measurement, as well as spreading behavior analysis, during the relaxation of the system (water on treated dentin) after initial drop growth. The theta data obtained were substantially more reproducible than those obtained with classical methods. A net effect of the treatment on theta was found, increasing dentin wettability: theta (polished) >theta (etched) >theta (deproteinized). The spreading rates correlate with the angles and are adequate for the dentin surface characterization. ANOVA and SNK tests show that for advancing contact angles the means corresponding to all treatments are significantly different. In the relaxing phase, mean angle and spreading rates on polished dentin differ significantly from those on etched and deproteinized dentin, but the latter do not differ significantly from each other.     

Determination of triclosan in foodstuffs

A reverse-phase high-performance liquid chromatographic (RP-HPLC) method coupled with an ultraviolet detector was developed to determine triclosan which had migrated into foodstuffs from packaging materials. The method includes extraction with hexane, followed by evaporation to dryness and residue re-dissolution in ACN 90%. Chromatographic separation was performed with a Kromasil 100 C18 column (15 cm x 0.4 cm ID, 5 microm particle size) at 30 degrees C and using ACN and water as mobile phases. Regarding recoveries, good results (higher than 83% and lower than 112%) were obtained for the three representative food matrixes selected (orange juice, chicken breast meat, and Gouda cheese).     

Flexible square supramolecular rings with hydrogen-bonded bushing in solid-state oxalurate complexes: versatility of the oxalurate ligand in covalent and noncovalent binding

Isotypic pseudooctahedral complexes of Co, Ni, and Cu with two chelating oxalurate ligands and two water molecules, trans-[M(oxalurate)(2)(H(2)O)(2)], have been synthesized and isolated by a novel progressive crystallization technique. Diffraction analyses reveal that the three complexes form isotypic solid-state structures in which the molecular connectivity and complex network of noncovalent interactions are qualitatively identical throughout the series. The oxalurate groups form unbounded chains through two different self-recognition patterns-a typical DA-AD motif and an unusual DDA'-A'DD form (D = hydrogen bond donor, A' = double acceptor). The unsymmetrical oxalurate group possesses the topological properties necessary to form aggregates of higher symmetry, and the "M(oxalurate)(2)" fragments form a rhombic 2-D motif with hydrogen-bonded corners and with hydrogen-bond acceptors directed to the inside of the cyclic aggregate. The 2-D net is stacked to form a channeled 3-D structure, in which the coordinated aqua ligands form the principal interlayer interactions. The slanted channels are occupied by the axial waters and by waters of crystallization, which are hydrogen bonded to the channel walls to form an ordered bushing. The extensive 3-D hydrogen-bonded superstructure is flexible enough to accommodate the distortion produced by the Jahn-Teller effect in the copper compound without requiring a qualitative structural change. The bonds affected by Jahn-Teller distortion in the Cu complex [Cu-O = 2.3788(15) A] are significantly longer than their analogues in the Co and Ni complexes [Co-O = 2.175(2), Ni-O = 2.094(9) A].     

Preconcentration of heavy metals ions from aqueous solutions by means of cellulose phosphate: an application in water analysis

Cellulose phosphate (CELLPHOS) was studied as a collector for analytical preconcentration of traces of Cd(II), Cr(III), Cu(II) and Ni(II) from aqueous sample solution. It has been proved that using chromatographic columns packed with CELLPHOS for preconcentration and 1.0 mol 1(-1) HCl for elution the adsorbed analytes are quantitatively enriched. An enrichment factor of 20 (100 ml sample, 5 ml concentrate) was achieved by this separation procedure, which was applied to a series of water analyses (river, sea, bog water).     

Direct electrochemical synthesis and characterization of copper(II), iron(II) and iron(III) complexes with 1- and 2-substituted pyridines

Summary The electrochemical oxidation of anodic metals (iron and copper) in MeCN solutions of 2-pyridinone (HOPy), 1-hydroxy-2-pyridinethione (HPT), 2-pyridinemethanethiol-1-oxide (HPMTO) or its dimer 2,2-dithiodimethyldipyridine-1,1-dioxide (PMTO)₂, gave the simple complexes Fe(OPy)₂ · H₂O, Cu(OPy)₂ · 3H₂O, Fe(PT)₂ · 3H₂O, Fe(PT)₃, Cu(PT)₂, Fe(PMTO)₂·3H₂O and Cu(PMTO)₂·H₂O, respectively. When 1,10-phenanthroline (phen) was added to the electrolytic phase, only two mixed complexes were obtained: Cu(OPy)₂phen·3H₂O and Fe(PT)₂phen·2H₂O. The possible molecular structures of the complexes were studied on the basis of their i.r. spectra and magnetic properties.     

Diastereoselective synthesis of cularine alkaloids via enium ions and an easy entry to isoquinolines by aza-Wittig electrocyclic ring closure

In preliminary communications, we reported the diastereoselective synthesis of cularine and sarcocapnine via the intramolecular ring closure of nitrenium and oxenium ions, a new highly diastereoselective reductive methylation with (+)-8-phenylmenthyl chloroacetate followed by reduction with sodium borohydride, and a facile entry to the isoquinoline precursors by aza-Wittig electrocyclic ring closure. We now report the full details of the syntheses of (+)-O-demethylcularine, (+)-cularine, (+)-sarcocapnidine, (+)-sarcocapnine, and (+)-crassifoline and describe different methods of synthesis of their precursors.     

Electric field induced electron transfer at the adsorbate-surface interface. Effect of the type of metal surface

The ab initio two-state model for electron transfer induced by an external electric field has been applied to the chloride oxidation on Cu, Rh, Pd, Ag, Pt and Au (001) surface models. The two electronic states involved in the model represent physical situations where the electron transferred from the chloride anion to the metal surface lies either on the halide or on the metal substrate. The model assumes that electron transfer takes place when these two states become degenerate and this is achieved by applying an external electric field. Two different situations representing either ultrahigh vacuum or electrochemical conditions have been considered. For the former the present study shows that electric field necessary to achieve degeneracy of the two electronic states is directly related to the metal surface work function whereas for the latter, it is found to be rather insensitive to the metal surface.     

Determination of lead in seawater by inductively coupled plasma optical emission spectrometry after separation and pre-concentration with cocrystallized naphthalene alizarin

An analytical method for separation and pre-concentration of lead in seawater for determination by inductively coupled plasma optical emission spectrometry has been investigated. Lead was retained in the solid phase (0.5 g) composed of co-precipitated naphthalene and alizarin red. The solid phase quantitatively sorbs Pb(II) at pH 8–9, and the metal was eluted using 5.0 ml of 2 mol l⁻¹ nitric acid. The effect of NaCl, KCl, BaCl₂, CaCl₂, Na₂SO₄, MgCl₂ and Na₃PO₄ on the sorption of Pb(II) in the solid phase was studied. A set of solutions containing varying amounts of electrolytes (0.5; 1.0; 3.0 and 5.0% m/v) with Pb (50 μg) was prepared and the recommended procedure applied. The Na₃PO₄ was found to interfere; the other electrolytes did not interfere up to 5% m/v. A pre-concentration factor of 40 was obtained in this analytical procedure. The limit of detection and limit of quantification for Pb(II) were 53 and 176 μg l⁻¹, respectively. Lead was determined in seawater samples collected in Salvador city, Bahia, Brazil. The precision, expressed as R.S.D., was 1.8–4.6%, and the recovery of lead added to seawater samples was 95–97%.