Thermoanalytical study of glibenclamide and excipients

Summary Taking into account the problems of desertification and agricultural practices able to provide income to the population at the semi-arid region of North-East Brazil, this work presents the results of the chemical and thermal characterization by TG and DSC of the seed derivatives of Cnidoscolus quercifolius, hereinafter called faveleira, aiming at the application of these materials as an alternative of food source for animals and for the human population at this region. The faveleira seed derivatives present thermodynamic properties similar to the ones of other foods utilized for human use, as well as an acceptable calorific value. According to TG and DSC results, was verified that the faveleira derivatives presents good thermal and oxidative stabilities.     

Studies on the encapsulation of diclofenac in small unilamellar liposomes of soya phosphatidylcholine

The encapsulation of acid (AD) and sodium diclofenac (SD) in small unilamellar liposomes (SUV) as well as the interactions of the drug with the bilayer was studied. SUV was prepared by sonication from multilamellar liposomes containing soya phosphatidylcholine and diclofenac at various proportions. The size distribution obtained from dynamic light scattering showed that the incorporation of SD decreases significantly the size of the liposomes suggesting that the drug interacts with the bilayer of the liposomes. This size decrease is related with the phase transition of liposomes to mixed micelar solution. The encapsulation of the hydrophilic dye indocyanine green in the aqueous compartment of liposomes showed that the rate of captured dye decreases with SD concentration suggesting the transition of liposomes to mixed micelles. The (31)P NMR analysis indicates that SD interacts with the phosphate of phosphatidylcholine head groups. A schematic model for interaction of SD with phosphatidylcholine of the liposomes in which the diclofenac anion interacts with the ammonium group of the phospholipid and the dichlorophenyl ring occupies a more internal site of bilayer near phosphate group was proposed.     

Dynamic contact angle and spreading rate measurements for the characterization of the effect of dentin surface treatments

A new methodology capable of providing reliable and reproducible contact angle (theta) data has been employed to study the effect of clinical treatments grinding, acid etching, and deproteinization on medial dentin tissue. It is based on the application of the ADSA-CD algorithm to the determination of low-rate dynamic contact angles, obtained from slowly growing drops, and on contact angle measurement, as well as spreading behavior analysis, during the relaxation of the system (water on treated dentin) after initial drop growth. The theta data obtained were substantially more reproducible than those obtained with classical methods. A net effect of the treatment on theta was found, increasing dentin wettability: theta (polished) >theta (etched) >theta (deproteinized). The spreading rates correlate with the angles and are adequate for the dentin surface characterization. ANOVA and SNK tests show that for advancing contact angles the means corresponding to all treatments are significantly different. In the relaxing phase, mean angle and spreading rates on polished dentin differ significantly from those on etched and deproteinized dentin, but the latter do not differ significantly from each other.     

Polystyrene/thermoplastic starch blends with different plasticizers

Conventional plastics has a large impact in increasing the environment’s pollution. That’s why the interest has turned towards novel partially and completely biodegradable polymers. In this work, blends of polystyrene and thermoplastic starch with glycerol and Buriti (Mauritia flexuosa L.) oil as plasticizers were prepared. Samples were analyzed using TG/DTG and DSC techniques. The TG results indicated that the blends with Buriti oil are thermally more stable than those with glycerol. The DSC analysis that Buriti oil provides a higher degree of plasticization of PS, compared to the blends plasticized using glycerol under the studied conditions.     

Determination of salicylate in blood serum using an amperometric biosensor based on salicylate hydroxylase immobilized in a polypyrrole-glutaraldehyde matrix

The use of an amperometric biosensor for the salicylate determination in blood serum is described. The biosensor is based on salicylate hydroxylase (EC 1.14.13.1) electropolymerized onto a glassy carbon-working electrode with polypyrrole and glutaraldehyde, to improve the biosensor lifetime. The hexacyanoferrate (II) was also incorporated to work as a redox mediator to minimize possible interferences. The salicylate is enzymatically converted to catechol, which is monitored amperometrically by its electrooxidation at+0.170 V versus SCE (saturated calomel electrode). Salicylate determination was carried out maintaining the ratio between beta-NADH and salicylate at 4:1 (30 degrees C). The amperometric response of the biosensor was linearly proportional to the salicylate concentration between 2.3x10(-6) and 1.4x10(-5) mol l(-1), in 0.1 mol l(-1) phosphate buffer (pH 7.8), containing 0.1 mol l(-1) KCl and 5.0x10(-4) mol l(-1) Na(2)H(2)EDTA, as supporting electrolyte. The recovery studies, in the presence of several interfering compounds, showed recoveries between 96.4 and 104.8%. The useful lifetime of the biosensor in the concentration range evaluated was at least 40 days, in continuous use. Blood serum samples analyzed by this biosensor showed a good correlation compared to the spectrophotometric method (Trinder) used as reference, presenting relative deviations lower than 7.0%.     

Analysis of sediments for heavy metals by a rapid electrothermal atomic-absorption procedure

A rapid electrothermal atomic-absorption spectrophotometric procedure with homogenization as the only pretreatment is compared with two wet pretreatment methods followed by flame atomic-absorption, in a statistically designed experiment. Samples from the top 5 cm of sediments at three different points of the Tejo estuary were used for the tests. The results show that the electrothermal procedure performed as well as whichever was the better of the flame methods for the determination of cadmium and nickel, irrespective of the sand content of the samples; although not statistically significant, there was apparently a decrease in recovery for chromium, copper and lead by the electrothermal method as the sand content of the sample increased. For zinc the electrothermal method gave results statistically different from those of the flame procedures when the sand content was high but not when the organic content of the sample was high. Because of the limited degree of replication (5 variates) the relative differences between the average values obtained by the three methods were significant only if they exceeded 15%. The electrothermal method has the advantage of substantially greater speed.     

Spectroscopic and electrochemical studies on (2-hydroxypicolinate)-bis(2,2′-bipyridine)ruthenium(II) and related complexes

Summary The synthesis, spectra and electrochemistry of [Ru(bipy)₂-(picOH)]⁺ and -picO-[Ru(bipy)₂]₂ ²⁺ (bipy = 2,2-bipyridine and picOH = 3-hydroxypicolinate ion) are described. The spectroscopic properties in the visible region are dominated by the intense Ru bipy chargetransfer transitions. In the binuclear complex, the two [Ru(bipy)₂L]²⁺ moieties are nonequivalent, exhibiting E _1/2 = 0.69 and 1.20 V versus s.h.e. The partially oxidized species exhibits a weak intervalence transfer band at 1085 nm, and is consistent with a Robin-Day class II mixed valence complex.     

Determination of triclosan in foodstuffs

A reverse-phase high-performance liquid chromatographic (RP-HPLC) method coupled with an ultraviolet detector was developed to determine triclosan which had migrated into foodstuffs from packaging materials. The method includes extraction with hexane, followed by evaporation to dryness and residue re-dissolution in ACN 90%. Chromatographic separation was performed with a Kromasil 100 C18 column (15 cm x 0.4 cm ID, 5 microm particle size) at 30 degrees C and using ACN and water as mobile phases. Regarding recoveries, good results (higher than 83% and lower than 112%) were obtained for the three representative food matrixes selected (orange juice, chicken breast meat, and Gouda cheese).     

Flexible square supramolecular rings with hydrogen-bonded bushing in solid-state oxalurate complexes: versatility of the oxalurate ligand in covalent and noncovalent binding

Isotypic pseudooctahedral complexes of Co, Ni, and Cu with two chelating oxalurate ligands and two water molecules, trans-[M(oxalurate)(2)(H(2)O)(2)], have been synthesized and isolated by a novel progressive crystallization technique. Diffraction analyses reveal that the three complexes form isotypic solid-state structures in which the molecular connectivity and complex network of noncovalent interactions are qualitatively identical throughout the series. The oxalurate groups form unbounded chains through two different self-recognition patterns-a typical DA-AD motif and an unusual DDA'-A'DD form (D = hydrogen bond donor, A' = double acceptor). The unsymmetrical oxalurate group possesses the topological properties necessary to form aggregates of higher symmetry, and the "M(oxalurate)(2)" fragments form a rhombic 2-D motif with hydrogen-bonded corners and with hydrogen-bond acceptors directed to the inside of the cyclic aggregate. The 2-D net is stacked to form a channeled 3-D structure, in which the coordinated aqua ligands form the principal interlayer interactions. The slanted channels are occupied by the axial waters and by waters of crystallization, which are hydrogen bonded to the channel walls to form an ordered bushing. The extensive 3-D hydrogen-bonded superstructure is flexible enough to accommodate the distortion produced by the Jahn-Teller effect in the copper compound without requiring a qualitative structural change. The bonds affected by Jahn-Teller distortion in the Cu complex [Cu-O = 2.3788(15) A] are significantly longer than their analogues in the Co and Ni complexes [Co-O = 2.175(2), Ni-O = 2.094(9) A].     

New Factorial Designs to Evaluate Chemisorption of Divalent Metals on Aminated Silicas

Adsorption processes of Cu(II), Co(II), and Hg(II) on two aminated silica gel surfaces with immobilized ethylenediamine and diethylenediamine groups were studied by a new 2(3) full factorial design. Two metal quantity levels, temperatures of 25 and 50 degrees C, and silica amounts of 100 and 200 mg were employed. Our study indicates that higher factorial design levels increase adsorption for all metals evaluated, with the exception of the mass parameter. Adsorption is also significantly affected by important antagonistic and synergistic effects involving all factors. Both functionalized silica gel surfaces present higher interactions and good perspectives in preconcentration studies for mercury. The factorial design results are also discussed in terms of some solvation properties for each of the metals studied. Copyright 2001 Academic Press.