Pyranoxanthones from Calophyllum Inophyllum

Phytochemical investigation of the stem bark of Calophyllum inophyllum resulted in the isolation of a new dipyrenoxanthone, calophinone ( 1 ), together with four related xanthones ( 2–5 ). Identification of the isolated compounds was achieved through intensive studies of their spectral data, especially 2D NMR.     

Dynamic Interfacial Tension Behavior of Water/Oil Systems Containing In situ-Formed Surfactants

Time-dependent interfacial tension (IFT) has been investigated for an interfacially reactive immiscible system composed of model-acidified oil and alkaline water. The acidified oil was composed of either lauric acid or linoleic acid dissolved in n-dodecane. Drop volume tensiometry was employed to measure the interfacial tension between the two phases. In the case of lauric acid, the IFT value was found to decrease sharply with increasing alkali concentration, even at low drop formation times. In the case of linoleic acid, the IFT decrease with the drop formation time was more gradual, especially at low alkali concentration. The rate of formation of the interfacial area was also found to be dependent on alkali concentration.     

Preparation of 188Re-labeled hydroxyapatite for radiosynovectomy

Hydroxyapatite (HA), a natural constituent of bone, was synthesized. HA particles were radiolabeled with ¹⁸⁸Re. Radiolabeling efficiency was 95%. In vitro studies showed 5% loss of activity from particles in normal saline over a period of 2 days, whereas a dissociation rate of 9% was observed in human serum albumin.     

Lavandulifolioside: A New Phenylpropanoid Glycoside from Stachys lavandulifolia

A new phenlypropanoid glycoside has been isolated from the methanolic extract of the aerial parts of Stachys lavandulifolia (Lamiaceae), lavandulifolioside (1) . On the basis of chemical and spectral data the structure of the new compound 1 has been elucidated as β-(3,4-dihydroxyphenyl)ethyl O-α-L -arabinopyranosyl-(1→2)-α-L -rhamnopyranosyl-(1→3)-4-O-caffeoyl-β-D -glucopyranoside.     

Organic–inorganic nanocomposites prepared from fluoro-aramid and silica

Fluoro-aramid-based sol/gel-derived nanocomposites were synthesized by condensing a mixture of 4,4′-(hexafluoro-isopropylidene)dianiline and 1,3-phenylenediamine with terephthaloylchloride (TPC) in dimethylacetamide. TPC was added in slight excess to produce amide chains with carbonyl chloride end groups and then replaced with alkoxy groups using aminophenyltrimethoxysilane to develop bonding with the silica network. Mechanical, dynamic mechanical thermal, water absorption and morphological measurements were carried out on the thin hybrid films. Increase in the tensile strength and modulus was observed as compared to pristine polyamide. The thermal decomposition temperature was found in the range of 400–500 °C. The water absorption was found to be reduced with higher silica content. The glass transition temperature and the storage moduli increased with increasing silica concentration. The maximum increase in the T _g value (345 °C) was observed with 20 wt% silica. Scanning electron microscopy revealed the uniform distribution of silica in the matrix with an average particle size ranging from 8 to 50 nm.     

Phase Diagram and Properties of Glasses of the System Sb<Subscript>2</Subscript>S<Subscript>3</Subscript>-AgI

The phase diagram of the system Sb₂S₃-AgI was constructed from data of the differential thermal and X-ray phase analyses. The physicochemical properties of glassy and crystalline alloys were studied.     

Uptake of Tm(III) ions onto polyurethane foam from H2O - ethanol mixture containing 1-(2-pyridylazo)-2-naphthol (PAN)

Summary The sorption of microquantities of Tm(III) ions on washed polyurethane foam (PUF) from a mixture of aqueous solution and ethanol containing PAN was examined. The maximum sorption of 3.18^. 10^-6M solution of Tm(III) ions was observed at pH 8 with 30-minute equilibration time. The optimum ratio of aqueous-ethanol phase for the sorption of Tm(III) ions was found to be 3:1 v/v, respectively. The sorption rate of metal ions on PUF is followed a first order kinetics and obeyed the equation for an intra particle diffusion process. The equilibrium concentration data of Tm(III) ions could be described satisfactorily by several adsorption isotherms. The Freundlich adsorption isotherm constants 1/nand K_Fare 0.66±0.02 and (5.7±0.3)^. 10^-3mol^. g^-1, respectively. The Langmuir isotherm constants for monolayer coverage (Q) and binding strength of sorption (b) are (2.5±0.7)^. 10^-5mol^. g^-1and (1.6±0.1)^. 10⁴l^. mol^-1, respectively. The sorption capacity derived from Dubinin-Radushkevich (D-R) isotherm is (1.7±0.2)^. 10^-4mol^. g^-1and the sorption free energy (E) is 9.8±0.2 kJ^. mol^-1indicating chemisorption phenomena. The thermodynamic parameters indicate that the sorption of Tm(III) ions onto PUF is endothermic, entropy driven and spontaneous in nature.     

New Group 6 metal carbonyl derivatives of 2-(2'(-pyridyl)benzimidazole: synthesis and spectroscopic studies

Reaction of Cr(CO)(6) with 2-(2'-pyridyl)benzimidazole (pbiH) under reduced pressure resulted in the formation of the dinuclear complex [Cr(2)(CO)(6)(pbiH)(2)]. Infra-red (IR) spectroscopy revealed the presence of terminal and bridge Cr-CO bonds. Interaction of M(CO)(6), M=Cr, Mo and W, with pbiH in the presence of 2,2'-bipyridine (bpy) gave the tetracarbonyl complexes [M(CO)(4)(pbiH)].bpy. Spectroscopic studies of the complexes indicated the presence of hydrogen bonding between the bpy nitrogen and the NH group of pbiH. Reactions of M(CO)(6) with pbiH in the presence of PPh(3) gave the tricarbonyl monosubstituted derivatives [M(CO)(3)(PPh(3))(pbiH)]. The spectroscopic studies of the complexes suggested the proposed structures.     

A thiazole-containing tripodal ligand: synthesis, characterization, and interactions with metal ions and matrix metalloproteinases

A new tripodal ligand, tris[2-(((2-thiazolyl)methylidene)amino)ethyl]amine (Tatren), has been synthesized and characterized by NMR, IR, and UV-visible absorbance spectroscopy and elemental analysis. Tatren forms stable complexes with transition metal ions (Zn(2+), 1; Mn(2+), 2; Co(2+), 3) and the alkaline earth metal ions (Ca(2+), 4; Mg(2+), 5). Single-crystal X-ray structures of 1, 2, and 5 revealed six-coordinate chelate complexes with formula [M(Tatren)](ClO(4))(2) in which the metal centers are coordinated by three thiazolyl N atoms and three acyclic imine N atoms. Crystals of 1, 2, and 5 are monoclinic, P2(1)/c space group. Crystals of 4 are triclinic, P space group. The Ca(2+) complex is eight-coordinate with all N atoms of Tatren and one water molecule coordinated to the metal ion. Spectrophotometric titrations show that formation constants for the chelates of metal ions are >1 in methanol. Free Tatren inhibits the catalytic domain of matrix metalloproteinase-13 (MMP-13, collagenase-3) with K(i) = 3.5 +/- 0.6 microM. Molecular mechanics-based docking calculations suggest that one leg of Tatren coordinates to the catalytic Zn(2+) in MMPs-2, -9, and -13 with significant hydrogen bonding to backbone amide groups. High-level DFT calculations suggest that, in the absence of nonbonded interactions between Tatren and the enzyme, the most stable first coordination sphere of the catalytic Zn(2+) is achieved with three imidazolyl groups from His residues and two imine N atoms from one leg of Tatren. While complexes (1-3) do not inhibit MMP-13 to a significant extent, 4 does (K(i) = 30 +/- 10 microM). Hence, this study shows that tripodal chelating ligands of this class and their Ca(2+) complexes have potential as active-site inhibitors for MMPs.     

Sensory, physicochemical and microbiological quality of irradiated minimally processed cauliflower

Minimally processed cauliflower samples were irradiated, stored at 5 °C for 2 weeks and analyzed for sensory, physicochemical and microbiological qualities at 0th, 7th and 14th days. The data showed highest mean values of 7.93 and 7.57 for appearance and flavor, respectively, for 1.0 kGy treated samples. The D₁₀ values of contaminating microorganisms on cauliflower were 0.20 (Escherischia coli) and 0.24 kGy (Salmonella paratyphae A.) and the resulting 5D₁₀ value was 1.2 kGy. The study revealed that a dose of 1.5 kGy is enough for retention of quality and reduction of microbial load to 5D₁₀ values in cauliflower during 2 weeks storage at refrigerated temperature.