Comparative Study of the Synthetic Approaches and Biological Activities of the Bioisosteres of 1,3,4-Oxadiazoles and 1,3,4-Thiadiazoles over the Past Decade

The bioisosteres of 1,3,4-oxadiazoles and 1,3,4-thiadiazoles are well-known pharmacophores for many medicinally important drugs. Throughout the past 10 years, 1,3,4-oxa-/thiadiazole nuclei have been very attractive to researchers for drug design, synthesis, and the study of their potential activity towards a variety of diseases, including microbial and viral infections, cancer, diabetes, pain, and inflammation. This work is an up-to-date comparative study that identifies the differences between 1,3,4-thiadiazoles and 1,3,4-oxadiazoles concerning their methods of synthesis from different classes of starting compounds under various reaction conditions, as well as their biological activities and structure–activity relationship.     

A validated HPLC‐PDA method for identification and quantification of two bioactive alkaloids,ephedrine and cryptolepine,in different Sida species

A simple, rapid, accurate and reproducible reverse‐phase HPLC method has been developed for the identification and quantification of two alkaloids ephedrine and cryptolepine in different extracts of Sida species using photodiode array detection. Baseline separation of the two alkaloids was achieved on a Waters RP‐18 X‐terra column (250 × 4.6 mm, 5 µm) using a solvent system consisting of a mixture of water containing 0.1% Trifluoroacetic acid (TFA) and acetonitrile in a gradient elution mode with detection at 210 and 280 nm for ephedrine and cryptolepine, respectively. The calibration curves were linear in a concentration range of 10–250 µg/mL for both the alkaloids with correlation coefficient values >0.99. The limits of detection and quantification for ephedrine and cryptolepine were 5 and 10 µg/mL and 2.5 and 5 µg/mL, respectively. Relative standard deviation values for intra‐day and inter‐day precision were 1.22 and 1.04% for ephedrine and 1.71 and 2.06% for cryptolepine, respectively. Analytical recovery ranged from 92.46 to 103.95%. The developed HPLC method was applied to identify and quantify ephedrine and cryptolepine in different extracts of Sida species. Copyright © 2013 John Wiley & Sons, Ltd.     

Effect of Pr-Ca substitution on the transport and magnetic behavior of LaMnO3 perovskite

The effect of simultaneous substitution of a fluctuating cation and a divalent cation in LaMnO₃ perovskite modifies the properties of the material to exhibit large valence colossal magnetoresistance (CMR) effect. A good example of these properties is (La_1−2x Pr _x Ca _x )MnO₃ (LPCMO) type CMR material. In this communication it is reported that, with the increase in x (for x=0.1, 0.15, 0.2), the T _c varies between 100 and 120 K with improvisation in metal-insulator transition. Interestingly, resistance increases with x from few hundred ohms to few kilo ohms with corresponding decrease in the unit cell volume. The results of the studies using X-ray diffraction (XRD), electrical resistivity, magnetoresistance and ac susceptibility measurements on LPCMO samples for understanding the structural, transport and magnetic properties are discussed in detail.     

Theoretical analysis of the multi-rotational line TEA CO2 laser

A theoretical model for the multiline TEA CO₂ laser has been developed which takes into account the overlap of the P(20) line of (00⁰1) (10⁰0) regular band transition with the R(23) line of (01¹1) (11¹0) hot band transition. The model is used for the study of the influence of different parameters like laser gas temperature, gas mixture and pump rates on laser intensities of different rotational lines. This study explains the experimental results of the high power multiline TEA CO₂ laser very well.     

Statistics-Based Outlier Detection and Correction Method for Amazon Customer Reviews

People nowadays use the internet to project their assessments, impressions, ideas, and observations about various subjects or products on numerous social networking sites. These sites serve as a great source to gather data for data analytics, sentiment analysis, natural language processing, etc. Conventionally, the true sentiment of a customer review matches its corresponding star rating. There are exceptions when the star rating of a review is opposite to its true nature. These are labeled as the outliers in a dataset in this work. The state-of-the-art methods for anomaly detection involve manual searching, predefined rules, or traditional machine learning techniques to detect such instances. This paper conducts a sentiment analysis and outlier detection case study for Amazon customer reviews, and it proposes a statistics-based outlier detection and correction method (SODCM), which helps identify such reviews and rectify their star ratings to enhance the performance of a sentiment analysis algorithm without any data loss. This paper focuses on performing SODCM in datasets containing customer reviews of various products, which are (a) scraped from Amazon.com and (b) publicly available. The paper also studies the dataset and concludes the effect of SODCM on the performance of a sentiment analysis algorithm. The results exhibit that SODCM achieves higher accuracy and recall percentage than other state-of-the-art anomaly detection algorithms.     

Spectral,electron microscopic and chemical investigations of gamma-induced purple color zonings in amethyst crystals from the Dursunbey-Balıkesir region of Turkey

Amethyst crystals on matrix specimens from the Dursunbey-Bal?kesir region in Turkey have five representative purple color zonings: dark purple, light purple, lilac, orchid, and violet. The purple color zonings have been analyzed with optical absorption spectra in the visible wavelength region, chemical full trace element analyses (inductively coupled plasma-atomic emission spectroscopy and inductively coupled plasma-mass spectroscopy), and scanning electron microscopic images with high magnification. It can be proposed that the production of the purple color in amethyst crystals is due to three dominant absorption bands centered at 375, 530, and 675 nm, respectively. In addition, the purple color zonings are also due to four minor absorption bands centered at 435, 480, 620, and 760 nm. X-ray diffraction graphics of the investigated amethyst crystals indicate that these crystals are composed of a nearly pure alpha-quartz phase and do not include any moganite silica phase and/or other mineral implications. Trace element analyses of the amethyst crystals show five representative purple color zonings, suggesting that the absorption bands can be mainly attributed to extrinsic defects (chemical impurities). However, another important factor that influences all structural defects in amethyst is likely to be the gamma irradiation that exists during amethyst crystallization and its inclusion in host materials. This gamma irradiation originates from the large underlying intrusive granitoid body in the region of amethyst formation. Irradiation modifies the valence values of the impurity elements in the amethyst crystals. It is observed that the violet-colored amethyst crystals have the most stable and the least reversible coloration when exposed to strong light sources. This situation can be related to the higher impurity content of Fe (2.50 ppm), Co (3.1 ppm), Ni (38 ppm), Cu (17.9 ppm), Zn (10 ppm), Zr (3.9 ppm), and Mo (21.8 ppm).     

Deformation and annealing behaviour of a low carbon high Mn TWIP steel microalloyed with Ti

ABSTRACT

A low carbon high Mn, Ti microalloyed dual phase TWIP steel has been processed through cold rolling and annealing. X-ray diffraction reveals the maximum austenite (≈92%) in HRACST sample whereas, the 50CD sample shows 29% ferrite. The microstructure of HRAC and HRACST samples reveal austenite grains with annealing twins and deformation induced ferrite (DIF). The higher amount of DIF along with deformation twins form during cold deformation. Annealing at 500°C shows recovery, whereas at 700°C shows partial recrystallisation and at 900°C reveals almost full recrystallisation. TEM microstructures of the 900°C for 30?min samples reveal annealing twins with TiC particle. Strong Brass {110}<112> and Goss{110}<001> texture components are observed in HRAC, HRACST and 50CD samples. Goss Twin (GT) {113}<332> and Copper Twin (Cu-T) {552}<115> components are observed in 50CD sample. Addition of Ti results in an average grain size of 20?μm. Maximum YS (1176?MPa) and UTS (1283?MPa) values with the lowest ductility of 11% have been obtained for the 50CD sample which is related to the formation of extensive deformation twin and a higher fraction of DIF. 700°C-30?min and 700°C-60?min samples show an increase in ductility (23% and 34%, respectively) with a marginal decrease in tensile strength (1054?MPa). Annealing at 900°C shows ductility restoration up to 60% with higher tensile strength compared to HRACST sample. Ductile fracture of HRAC and HRACST samples transform to brittle fracture in the 50CD sample. Annealing at 900°C for 30?min shows ductile fracture with some (Fe, Mn)S and TiC particles.     

In-situ and ex-situ study of crystallization behaviour of magnetron sputtered Ni63Zr37 amorphous thin film

ABSTRACT

The stages of crystallization of magnetron sputter-deposited Ni₆₃Zr₃₇ film with mostly amorphous structure have been investigated by differential scanning calorimetry (DSC) and in-situ annealing at 300°C by use of heating stage on a high-resolution transmission electron microscope (HRTEM). These results have been further confirmed by grazing incidence X-ray diffraction analyses of thin film specimens annealed ex-situ at 300°C for various durations. The temperature for crystallization found by DSC has been found to increase from 371°C to 434°C with an increase in heating rate from 3°C/min to 10°C/min, and the apparent activation energy for amorphous to crystalline transformation has been found as ～260.2?kJ/mol from the Kissinger plot. Studies on HRTEM using in-situ heating stage have shown the crystallization to occur on annealing at 300°C for ～10?min. Crystallization at a temperature lower than that found by DSC is attributed to structural relaxation with reduction of free volume due to thermal activation. It has been observed that Ni₃Zr forms first due to its large negative enthalpy of formation, and is followed by the formation of Ni-rich solid solution (Ni_ss) grains. HRTEM studies have shown grain rotation with the formation of partial dislocations at Ni₃Zr-Ni_ss interfaces as well as twinning followed by detwinning with dislocation formation in the Ni_ss matrix possibly to reduce the interfacial energy.