浙江发展会展旅游的战略构想

通过对浙江会展旅游现状的分析和研究,总结了浙江会展旅游业的现状与优势,指出了面临的问题,进而从政府与会展企业角度提出了发展浙江会展旅游业的对策.     

HL－1装置辅助加热等对能量约束的影响

在ＨＬ－１托卡马克上进行了辅助加热、加料、电流驱动的物理实验研究。在改善等离子体约束方面，某些实验取得了较好的结果。在适当的稳定放电条件下，低杂波电流驱动和弹丸注入辅助加料，均能使等离子体能量约束得到一定程度的改善，与相同密度条件下的欧姆加热放电相比，能量约束时间提高了约３０％。在电子回旋共振加热等离子体实验中，等离子体总能量明显增加，但与相同密度条件下的欧姆加热放电相比，能量约束时间减少了约２０％。     

不同倾角的脉管制冷机内自然对流影响的研究

本文通过对脉管内自然对流的数值模拟，讨论了当脉管冷端处在不同方向时，脉管内的自然对流对脉管制冷机性能的影响．数值模拟结果表明，当冷端在下时获得的制冷温度最低；当热端在下并与重力方向成３０°时制冷温度最高．结论与实验测量结果定性一致．所做的理论分析对实现脉管制冷机的良好运行有指导意义。     

The layered compound poly[μ2‐4,4′‐bipyridyl‐di‐μ2‐chlorido‐mercury(II)]

The title compound, [HgCl₂(C₁₀H₈N₂)]_n, features two‐dimensional [HgCl₂(4,4′‐bipy)]_n neutral networks (4,4′‐bipy is 4,4′‐bipyridine), based on an octahedral Hg atom coordinated by four μ₂‐Cl atoms and two μ₂‐4,4′‐bipy ligands in trans positions, yielding a HgCl₄N₂ octahedron. The structure has mmm symmetry about the Hg atoms, with most of the atoms on at least one mirror plane, but the unsubstituted C atoms of the 4,4′‐bipy rings are disordered across a mirror plane. Photoluminescent investigations reveal that the title compound displays a strong emission in the green region, which probably originates from a ligand‐to‐ligand charge‐transfer transition.     

Aggregation Properties of an Amphiphilic Methanofullerene Derivative in THFH_2O Solvent Mixtures

Water-soluble fullerenes not only have a number of important applications in biological chemistry1, but also form ordered aggregate structures that can be utilized in materials science2. There are reports that some water-soluble fullerene derivatives can form ordered structures in water, such as vesicle, nanorod and nanoparticle2-5. However, relatively few reports on the aggregation process have been reported. Knowledge of factors that affect the cluster formation in solution is of consider…     

Synthesis of the D-Galactopyranoside Derivative of C_(60)

ThefascinatingsbocturesandpropertiesoffullereneshaveoPeneduPanewfieldofchendstry.Inparticular,F.Wudletal.l'2haveshownthatwatersofubleC6ocomPoundsinhibittheHITVen-zymesprotease(HIVP)andreversetranscriPtase(HIVRT).IthasbeenafocusofstUdytoinvestigatethebiologicalactivitiesofthesenovelsubstances.Fortheirpossiblemedicaluses,tolinkC6omoleculetonaturalProductssuchassugars,pephdes,amioacides,andsoonisanimPortantmethodinthisfield.Vasella3reportedthefirstglucosidederivativeofC6o'InthispaPer,w…     

氩等离子体物态方程的TF简化模型

对于高温高压下氩等离子体的电离度和物态方程,本文给出了一种基于Thomas-Feimi(TF)统计模型的简化计算新方法:首先将TF模型电离势的数值结果进行函数逼近,给出一个便于数值求解的计算电离度的近似计算方法,并由此计算了局部热动平衡下的氩等离子体在10～1000 eV高温范围内的物态方程.计算结果与国外报道的其他几种理论模型的计算结果均符合很好,与实验值也吻合较好.本文所提出的简单模型也适用于计算混合物物态方程,可以在电磁发射技术领域中的强电离等离子体中有更为广阔的应用前景.     

Monte Carlo simulation of grain growth in polycrystalline materials

Understanding the kinetics of grain growth, under the influence of second phase (such as impurities, voids and bubbles) is fundamental to advances in the control of microstructural evolution. As a precursor to this objective, we have investigated the grain growth kinetics in a polycrystalline material using a standard Q-state Potts’ model under Monte Carlo settings. Based on physical reasoning, new modifications are suggested to circumvent some of the disadvantages in the basic Potts model. The efficacy of these modifications vis-à-vis the basic model is verified. The influence of second phase particles on the impurity loaded grain boundaries is investigated for the study of grain growth kinetics.     

超模的同构定理

本文利用模论导出超模的三个同构定理,同时,给出超模的Jordan-Holder定理,最后,探讨了超模的基本关系∈~*,并研究其性质．     

Boiling heat transfer characteristics of nanofluids in a flat heat pipe evaporator with micro-grooved heating surface

An experimental study was performed to understand the nucleate boiling heat transfer of water–CuO nanoparticles suspension (nanofluids) at different operating pressures and different nanoparticle mass concentrations. The experimental apparatus is a miniature flat heat pipe (MFHP) with micro-grooved heat transfer surface of its evaporator. The experimental results indicate that the operating pressure has great influence on the nucleate boiling characteristics in the MFHP evaporator. The heat transfer coefficient and the critical heat flux (CHF) of nanofluids increase greatly with decreasing pressure as compared with those of water. The heat transfer coefficient and the CHF of nanofluids can increase about 25% and 50%, respectively, at atmospheric pressure whereas about 100% and 150%, respectively, at the pressure of 7.4 kPa. Nanoparticle mass concentration also has significant influence on the boiling heat transfer and the CHF of nanofluids. The heat transfer coefficient and the CHF increase slowly with the increase of the nanoparticle mass concentration at low concentration conditions. However, when the nanoparticle mass concentration is over 1.0 wt%, the CHF enhancement is close to a constant number and the heat transfer coefficient deteriorates. There exists an optimum mass concentration for nanofluids which corresponds to the maximum heat transfer enhancement and this optimum mass concentration is 1.0 wt% at all test pressures. The experiment confirmed that the boiling heat transfer characteristics of the MFHP evaporator can evidently be strengthened by using water/CuO nanofluids.