Characterization of anthocyanin extracts from maize kernels

The aim of the present work is to characterize the pigments present in the kernel of four native maize varieties related to the races Arrocillo, Cónico, Peruano, and Purepecha to determine their possible use as natural dyes. Total anthocyanin content is determined by a conventional spectrophotometric method, and anthocyanin analysis is done by high-performance liquid chromatography. The stability of the pigment at pH is also evaluated. The four maize samples contained anthocyanin in both the pericarp and aleurone layer. Total anthocyanin content among samples ranged from 54 mg/100 g of sample to 115 mg/100 g of sample. Anthocyanin profiles are almost the same among the four samples. Differences are observed only in the relative percentage of each anthocyanin. The anthocyanins identified are cyanidin-3-glucoside, pelargonidin- 3-glucoside, peonidin-3-glucoside, cyanidin-3-(6" malonylglucoside), and cyanidin-3-(3",6"-dimalonylglucoside). Anthocyanin extracts showed similar behavior in solutions with different pH. From pH 1-6 lambdamax values are maintained almost constant; however, above this pH value, a marked increase is observed in the bathochromic shifts, but the bluish color did not continue to change above pH 8.     

Chiral comprehensive two-dimensional gas chromatography with electron-capture detection applied to the analysis of chiral polychlorinated biphenyls in food samples

The feasibility of comprehensive two-dimensional gas chromatography with electron-capture detection (GC x GC-ECD) for the enantioseparation of chiral PCBs from other possible interfering compounds has been evaluated. Three commercially available enantioselective beta-cyclodextrin-based capillary columns (Chirasil-Dex, BGB-172 and BGB-176SE) have been tested as first-dimension columns. Three non-enantioselective stationary phases (HT-8, BPX-50 and Supelcowax-10) were combined with the enantioselective columns to allow the unambiguous determination of the enantiomers of the target chiral PCBs. Each enantioselective first-dimension column tested was able to separate into enantiomers different PCB congeners, but in all cases, the use of Supelcowax-10 as second-dimension column provided the most satisfactory results. The Chirasil-Dex x Supelcowax-10 column combination allowed the determination of the enantiomeric fraction (EF) of PCBs 84, 91, 95, 132, 136, 149, 174 and 176 in the working standard solution, while that of congener 135 was hindered. The BGB-172 x Supelcowax-10 column set allowed a proper EF determination of congeners 45, 84, 131, 132, 135, 171, 174 and 183, while that of PCB 91 was interfered with co-elutants. The column combination BGB-176SE x Supelcowax-10 allowed the determination of all congeners that this enantioselective stationary phase was able to separate into enantiomers, i.e. PCBs 45, 91, 95, 136, 149 and 176. These column combinations have also been evaluated for the simultaneous determination of the 12 congeners with a toxic equivalency factor assigned by the WHO (PCBs 77, 81, 105, 114, 118, 123, 126, 156, 157, 167, 169, 189) and the seven indicator congeners (PCBs 28, 52, 101, 118, 138, 153 and 180), and evaluated for the analysis of food samples.     

In situ assessment of atorvastatin impurity using MALDI mass spectrometry imaging (MALDI-MSI)

The analysis of impurities and degradation products in pharmaceutical preparations are usually performed by chromatographic techniques such as high-performance liquid chromatography (HPLC). This approach demands extensive analysis time, mostly due to extraction and separation phases. These steps must be carried out in samples in order to adapt them to the requirements of the analytical method of choice. In the present contribution, matrix-assisted laser desorption/ionization mass spectrometry imaging (MALDI-MSI) was employed to quantify an important degradation product in atorvastatin calcium 80 mg tablets: the atorvastatin lactone. Through the standard of the impurity, it was possible to perform quantitative analysis directly on the drug tablet, using a quick and novel approach, suitable for quality control processes in the pharmaceutical industry.     

Density-functional study of mechanisms for the cofactor-free decarboxylation performed by uroporphyrinogen III decarboxylase

Uroporphyrinogen III decarboxylase catalyzes the fifth step in heme biosynthesis: the elimination of carboxyl groups from the four acetate side chains of uroporphyrinogen III to yield coproporphyrinogen III. The enzyme acts by successively protonating each of the four pyrrole rings present in the substrate, thereby allowing decarboxylation of their side chains, but the identity of the proton donors has not been established yet. Tyr164 has been suggested as a proton donor, and Asp86 has been proposed to act either as a proton donor or as an intermediate-stabilizing residue. We have performed density-functional calculations to study this reaction mechanism, and found that the rate-limiting step is substrate protonation, rather than decarboxylation. Surprisingly, whereas Tyr164 is unable to protonate the substrate, this protonation can be effected by a nearby arginine residue (Arg37), with a free energy barrier of 21.4 kcal.mol(-1), in remarkable agreement with the experimental value of 19.5 kcal.mol(-1). The central positioning of this residue in close proximity to all four pyrrole rings in the substrate may play a key role in the sequential activation of each of these moieties.     

Preparation and Characterization of Graphite‐Epoxy Composite Modified with Zinc Hexacyanoferrate and Their Electrochemical Behaviour in Presence of Substituted Anilines

The growth of zinc hexacyanoferrate (ZnHCF) hybrid film on the surface of graphite‐epoxy composite (GEC) electrodes was demonstrated by cyclic voltammetry. Surface morphology of the hybrid film was investigated by using scanning electron microscopy. The effect of the type of monovalent cations on the redox behaviour of hybrid film was also studied. This effect indicated that the radius of the hydrated cation mainly determines the ion permeability of the film.     

Use of hydrogen peroxide to achieve interference-free stripping voltammetric determination of copper at the bismuth-film electrode

In this work, a new approach is presented to allow interference-free determination of Cu (II) by stripping voltammetry using the bismuth-film electrode. The addition of hydrogen peroxide to the electroanalytical cell has promoted complete resolution between re-dissolution peaks of Bi (III) and Cu (II). The absence of interference could be evaluated by the correlation coefficient (r > 0.99) between Cu (II) concentration and its shifted current peak (at +212 mV) while achieving a slightly fluctuation of the bismuth current peak at −180 mV. Studies were performed aiming towards the optimum conditions for trace determination of Cu (II) using hydrogen peroxide. The methodology was applied to a real sample (sugarcane spirits) and the results were compared to those from graphite furnace atomic absorption spectrometry. The analytical parameters of merit and the results of the analysis indicated that the analytical methodology could be readily used for trace determination of Cu (II).     

Recycled high-density polyethylene/gypsum composites: evaluation of the microscopic,thermal, flammability,and mechanical properties

Sustainable composites comprising scraps of high-density polyethylene (HDPE) and gypsum waste in proportions HDPE/gypsum 100/0, 50/50, 40/60, and 30/70 wt% were prepared. The morphology of the injected specimens was core-shell. Thermal, flammability, water absorption, and compression resistance were also evaluated. Progressively, the presence of gypsum increased the HDPE crystallinity and T_onset. Concerning the flammability, the composite 30/70 exhibited the burning rate three times lower than HDPE, indicating that the gypsum played a role as a flame retardant. The HDPE acted as waterproofing for gypsum. The compression resistance of the composites was similar to HDPE.