Discovery of powerful uranyl ligands from efficient synthesis and screening

New tripodal gem-(bis-phosphonates) uranophiles were discovered by a screening method that allowed for the selection of ligands with strong uranyl-binding properties in a convenient microtiter-plate format. The method is based on competitive uranium binding by using Sulfochlorophenol S as chromogenic chelate. This dye compound was found to present high uranyl complexation properties and allowed to highlight ligands presenting association constants for UO(2+)(2) up to 10(18) at pH 7.4 and 10(20) at pH 9. A collection of 40 known ligands including polycarboxylate, hydroxamate, catecholate, hydroxypyridonate and hydroxyquinoline derivatives was tested. Also screened was a combinatorial library prepared from seven amine scaffolds and eight acrylates bearing diverse chelating moieties. Among these 96 tested candidates, a tripod derivative bearing gem-bis-phosphonates moieties was found to present the highest complexation properties over a wide range of pH and was further studied.     

Computer simulation of a nitrogen ICP discharge

A theoretical model for calculating radial and axial temperature profiles in a nitrogen ICP discharge was improved to include the normal distribution of magnetic flux density and a three-gas flow pattern commonly used in spectrochemical applications. Calculated radial temperature and particle velocity distributions for nitrogen ICP discharges compare well with experimentally obtained data.     

Heterocycles contenant du phosphore-XXI. Etude par RMP de déeriveés de l'oxazaphospholane-l,3,2: I-Analyse des spectres des composksés non substitués en 4 et 5.

The PMR spectra of the title 1,3,2-oxazaphospholane derivatives present an ABKLX pattern. The subspectral analysis of such a system shows that there are eight solutions. INDOR experiments permit the establishment of the energy diagram and the selection of the correct solution.     

Iminodiacetic acid/ethylcellulose as a chelating ion exchanger: Part 2. Determination of trace metals by inductively-coupled plasma atomic emission spectrometry

A chelate-forming cellulose, iminodiacetic acid/ethylcellulose (IDAEC), is applied to the collection of metals from ammonium citrate and acetate solutions. A method is devised for the i.c.p./a.e.s. determination of metal contaminants in magnesium by separation and preconcentration of the metals with IDAEC.     

Coordination ability of trans-cyclohexane-1,2-diamine-N,N,N',N'-tetrakis(methylenephosphonic acid) towards lanthanide(III) ions

The proton and metal complex equilibria of trans-cyclohexane-1,2-diamine-N,N,N',N'-tetrakis(methylenephosphonic acid) (CDTP) with lanthanide(iii) ions, where Ln(III) = La(III), Nd(III), Sm(III), Eu(III), Gd(III), Tb(III), Ho(III) and Lu(III) were studied. The stoichiometry, protonation and complex formation constants were determined by potentiometric titration at 25.0 degrees C and ionic strength of 0.1 mol dm(-3) (KCl). All metal ions form several species: [LnH4L]-, [LnH3L](2-), [LnH2L](3-), [LnHL](4-), [LnL](5-), [LnH(-1)L](6-) and [LnH(-2)L](7-) in the pH range between 2 and 11. The stability constants log beta(LnL) were found to be between 14.7 and 16.7. The studied complexes were also characterized by spectroscopic methods (31P NMR, UV-Vis absorption and emission spectroscopy). These studies allowed to reveal a distinct structural change of the Ln(III)-CDTP complex which occurs between protonated and hydroxy species in solutions at pH around 7.5. The major change is caused by the involvement of both nitrogen donors in the metal ion coordination occurring in ML species. The data obtained from UV-Vis spectroscopy allowed to draw conclusions about complex symmetry and to estimate a number of coordinated water molecules. The hydration number or more precisely the number of two OH oscillators was found to be approximately one in all species formed over the pH range between 5 and 10. The structure of the major hydroxy complex was supported by X-ray crystallographic data. The crystal structures of the Eu(III) and Tb(III) complexes clearly show that the CDTP ligand is coordinated to the Ln(III) ion by two nitrogen and four oxygen atoms in such a way that only one oxygen atom from each phosphonic group is placed in the lanthanide inner sphere. The monomeric complex anion is connected to a symmetry related ion through short hydrogen bonds formed by two hydroxy ions and one water molecule. In this way the two neighbouring anions form a quasi-dimer in which one of the Ln(III) ion is seven-coordinate (two N atoms, four O atoms and one hydroxy ion) and the other is eight-coordinate (two N atoms, four O atoms, one hydroxy ion and one water molecule).     

Designer variable repeat length polypeptides as scaffolds for surface immobilization of quantum dots

We demonstrate the use of a series of engineered, variable-length de novo polypeptides to discretely immobilize luminescent semiconductor nanocrystals or quantum dots (QDs) onto functional surfaces. The polypeptides express N-terminal dicysteine and C-terminal hexahistidine residues that flank a variable number (1, 3, 5, 7, 14, 21, 28, or 35) of core beta-strand repeats, with tyrosine, glutamic acid, histidine, and lysine residues located at the turns. Polypeptides have molecular weights ranging from 4 to 83 kDa and retain a rigid structure based on the antiparallel beta-sheet motif. We first use a series of dye-labeled polypeptides to test and characterize their self-assembly onto hydrophilic CdSe-ZnS QDs using fluorescence resonance energy transfer (FRET). Results indicate that peptides maintain their beta-sheet conformation after self-assembly onto the QD surfaces, regardless of their length. We then immobilize biotinylated derivatives of these polypeptides on a NeutrAvidin-functionalized substrate and use them to capture QDs via specific interactions between the peptides' polyhistidine residues and the nanocrystal surface. We found that each of the polypeptides was able to efficiently capture QDs, with a clear correlation between the density of the surface-tethered peptide and the capacity for nanocrystal capture. The versatility of this capture strategy is highlighted by the creation of a variety of one- and two-dimensional polypeptide-QD structures as well as a self-assembled surface-immobilized FRET-based nutrient sensor.     

Chlorofluoroiodomethane as a potential candidate for parity violation measurements

CHFClI is among the more favorable molecules for parity violation (PV) measurements in molecules. Despite the fact that calculated PV effects are two orders of magnitude smaller than in some organometallic compounds, CHFClI displays interesting features which could make possible a new experimental PV test on this molecule. Indeed, ultrahigh resolution spectroscopy using an ultrastable CO(2) laser is favored by several intrinsic properties of this molecule. For example, the high vapor pressure of CHFClI allows investigation by supersonic beam spectroscopy. Indeed, the spectroscopic constants have been accurately determined by microwave and millimetre wave spectroscopy. This is important for the subsequent selection of an appropriate absorption band of CHFClI that could be brought to co?ncide with the absorption of CO(2). Partially resolved (+)- and (-)-CHFClI enantiomers with respectively 63.3 and 20.5% ee's have been recently prepared and analyzed by molecular recognition using chiral hosts called cryptophanes. Finally, the S-(+)/R-(-) absolute configuration was ascertained by vibrational circular dichro?sm (VCD) in the gas phase.     

Quantification of abscisic acid in grapevine leaf (Vitis vinifera) by isotope-dilution liquid chromatography–mass spectrometry

A specific, sensitive, precise, and accurate method for the determination of abscisic acid (ABA) in grapevine leaf tissues is described. The method employs high-performance liquid chromatography and electrospray ionization–mass spectrometry (LC-ESI-MS) in selected ion monitoring mode (SIM) to analyze ABA using a stable isotope-labeled ABA as an internal standard. Absolute recoveries ranged from 72% to 79% using methanol/water pH 5.5 (50:50 v/v) as an extraction solvent. The best efficiency was obtained when the chromatographic separation was carried out by using a porous graphitic carbon (PGC) column. The statistical evaluation of the method was satisfactory in the work range. A relative standard deviation (RDS) of < 5.5% and < 6.0% was obtained for intra-batch and inter-batch comparisons, respectively. As for accuracy, the relative error (%Er) was between −2.7 and 4.3%, and the relative recovery ranged from 95% to 107%.     

Capillary electrophoresis–electrospray mass spectrometry and HR–ICP–MS for the detection and quantification of 10B-boronophenylalanine (10B–BPA) used in boron neutron capture therapy

Boron neutron capture therapy (BNCT) is a bimodal radiotherapeutic treatment based on the irradiation of neoplastic tissues with neutrons after the tissues have selectively accumulated molecules loaded with nuclides with large neutron capture cross-sections (such boron-10). Boron-10 carriers have been tested to a limited extent, and clinical trials have been conducted on sulfhydryl borane (¹⁰B-BSH) and boronophenylalanine (¹⁰B-BPA). However, precise and accurate measurements of boron-10 concentrations (0.1–100 μg/g) in specimens and samples of limited size (μg scale) are needed in order to be able to biologically characterise new compounds in predictive tissue dosimetry, toxicology and pharmacology studies as well as in clinical investigations. A new approach based on fast separation and detection of ¹⁰B-BPA performed by coupling capillary electrophoresis to electrospray mass spectrometry is reported. This method allows the quantitative analysis and characterisation of ¹⁰B-BPA in a short time with a high separation efficiency. Detection limits of 3 μM for ¹⁰B-BPA and 30 ng/mL for ¹⁰B were obtained with CE–ESI–MS. A quantification limit of 10 μM for ¹⁰B-BPA (100 ng/mL for ¹⁰B) was attained. The total boron-10 concentration was determined by high-resolution inductively coupled mass spectrometry in order to validate the method. Boron-10 isotope measurements were carried out by HR–ICP–MS at medium resolution (R=4000) due to the presence of an isobaric interference at mass 10. Good agreement was obtained between the values from CE–ESI–MS and those from HR–ICP–MS. The method has been successfully used to determine the ¹⁰B-BPA in two lines of cultured cells.     

Numerical resolution of an exact heat conduction model with a delay term

In this paper we analyze, from the numerical point of view, a dynamic thermoelastic problem. Here, the so-called exact heat conduction model with a delay term is used to obtain the heat evolution. Thus, the thermomechanical problem is written as a coupled system of partial differential equations, and its variational formulation leads to a system written in terms of the velocity and the temperature fields. An existence and uniqueness result is recalled. Then, fully discrete approximations are introduced by using the classical finite element method to approximate the spatial variable and the implicit Euler scheme to discretize the time derivatives. A priori error estimates are proved, from which the linear convergence of the algorithm could be derived under suitable additional regularity conditions. Finally, a two-dimensional numerical example is solved to show the accuracy of the approximation and the decay of the discrete energy.