Application of titanium catalysts for the syntheses of heterocycles

The metal catalyzed synthesis of heterocycles is becoming an important and highly rewarding protocol in organic synthesis. Traditional approaches require expensive or highly specialized equipment or would be of limited use to the synthetic organic chemist due to their highly inconvenient approaches. Titanium-mediated cyclization reactions have been recognized as some of the simplest and useful tools for regio- as well as stereoselective syntheses of five-membered N-heterocycles. This review summarizes the applications of titanium catalysts with emphasis of their synthetic applications for different heterocylces. This review covered interesting discoveries in the past few years.     

Analysis of inter-satellite free-space optical link performance considering different system parameters

The welcome and adaptation of optical wireless technology by the modern era has brought forward the concept of an inter-satellite free-space optical communication system. In the present work, I study the combined effect of selection of different operating wavelengths and detector types along with the pointing errors at the transmitter and receiver side on the performance of an inter-satellite free-space optical link. The link performance has been optimized by measuring and analyzing the bit error rate and quality-factor of received signal under different scenarios. Performance of the inter-satellite link has also been investigated considering different modulation formats and data rates for LEO and MEO distances.     

Design,optimization and critical analysis of graphene based surface plasmon resonance sensor for DNA hybridization

Optical and Quantum Electronics - We have investigated the potential of using the E-field induced birefringence for improving the sensitivity of uniaxial anisotropic slab waveguide sensor based on...     

Enhanced Performance of CNT‐doped Imine Based Receptors as Fe(III) Sensor Using Potentiometry and Voltammetry

A highly sensitive and selective potentiometric and voltammteric assay for the detection of Fe³⁺ using (E)‐3‐((2‐(2‐(2‐aminoethylamino) ethylamino) ethylimino)methyl)‐4H‐chromen‐4‐one (IFE(III)) ionophore was developed. To demonstrate the ion‐to‐electron transfer ability of MWCNT, these were incorporated in the ion‐selective membrane and response characteristics of Fe³⁺ electrode was compared with those of the traditional ion selective electrode. The electrode showed an improved Nernstian slope, lower detection limit, response time of less than 5 s and working in a pH range of 3.0 to 8.0. Differential pulse voltammetric studies were performed for IFE(III)‐Fe³⁺ complex in DMSO solvent medium at glassy carbon (GC) electrode. A linear relationship between the cathodic peak current and concentration of Fe³⁺ was observed in the range of 1.6×10^?5 to 4.4×10^?5 mol/L with a detection limit of 5.2×10^?8 mol/L. The electrode shows remarkable selectivity for Fe³⁺ ions over alkali, alkaline earth, transition and heavy metal ions. The optimized electrode was successfully applied for the determination of Fe³⁺ ion in different real‐life samples using potentiometric technique. Theoretical calculations were used to support the complexation behavior of Fe³⁺ with IFE(III).     

Fabric phase sorptive extraction/GC‐MS method for rapid determination of broad polarity spectrum multi‐class emerging pollutants in various aqueous samples

A rapid extraction and cleanup method using selective fabric phase sorptive extraction combined with gas chromatography and mass spectrometry has been developed and validated for the determination of broad polarity spectrum emerging pollutants, ethyl paraben, butyl paraben, diethyl phthalate, dibutyl phthalate, lidocaine, prilocaine, triclosan, and bisphenol A in various aqueous samples. Some important parameters of fabric phase sorptive extraction such as extraction time, matrix pH, stirring speed, type and volume of desorption solvent were investigated and optimized. Calibration curves were obtained in the concentration range 0.05–500 ng/mL. Under the optimum conditions, the limits of detection were in the range 0.009 –0.021 ng/mL. This method was validated by analyzing the compounds in spiked aqueous samples at different levels with recoveries of 93 to 99% and relative standard deviations of <6%. The developed method was applied for the determination of the emerging contaminants in tap water, municipal water, ground water, sewage water, and sludge water samples. The results demonstrate that fabric phase sorptive extraction has great potential in the preconcentration of trace analytes in complex matrix.     

Dynamic heterogeneities in a simple liquid over different time scales

The heterogeneous features of the supercooled state over different time regimes are explored in a self-consistent mode-coupling mode. The exponent a for the mean-square displacement approximately t(a), of a tagged particle is computed. The non-Gaussian parameter alpha(2)(t) shows a peak in the short time regime in addition to a second peak over longer times. The position of the short-time peak in alpha(2)(t) hardly shifts, while that of the other grows with density.     

Rate acceleration and diastereoselectivity in chelation-controlled indium-promoted Barbier allylation of pyridine-2- and quinoline-2-imines in aqueous solvents

The imines generated in situ from 2-pyridinecarboxaldehyde/2-quinolinecarboxaldehyde and aryl amines undergo indium-mediated Barbier allylation in aqueous media to provide homoallylic amines. Crotyl and cinnamyl bromides lead to diastereoselective allylation with d.r. up to 98:2.     

Preparation and characterization of diphenyllead(IV) and triphenyllead(IV) complexes with N-protected amino-acids and the dipeptides

The diphenyllead(IV) derivatives of N-benzoyl-(glycine, DL -alanine); N-formyl and N-acetyl-L -phenylalanine; N-monochloroacetyl-L -phenylalanine; N-benzoyl-(glycylglycine, DL -alanylglycine), and N-formyl- N-acetyl- and N-monochloroacetyl-(L -phenylalanylglycine) have been prepared in 1:2 molar ratio by reaction of diphenyllead dichloride with the appropriate amino-acid or dipeptide. Corresponding triphenyllead(IV) derivatives have been prepared in 1:1 molar ratio by reaction of triphenyllead chloride with the thallium(I) salts of the amino-acid or the dipeptide. These complexes have been characterized by elemental analysis, IR and ¹H NMR spectral studies. A polymeric hexacoordinated octahedral structure for diphenyllead(IV), and a five-coordinated distorted trigonalbipyramidal chain-type structure for triphenyllead(IV), complexes is confirmed by IR spectra. The carboxylate group acts in a bidentate manner, not as in diorgano and triorganotin(IV) complexes with these acids, where it is monodentate. The available bonding sites such as amide and peptide carbonyl (CO) and amide and peptide nitrogen atoms are not involved in bonding with lead (IV) and thus are available for bonding with the biological systems. The presence of different N-protecting groups does not affect the coordination sites around lead(IV). The triphenyllead(IV) compounds are relatively more stable than the diphenyllead(IV) compounds.     

Progress in Boronic Acid-Based Fluorescent Glucose Sensors

Effective management of diabetes relies on the frequent monitoring of blood glucose concentrations. The current approach of blood sampling and glucose concentration determination in vitro) presents many problems. Therefore, there is a drive for the development of non-invasive and continuous monitoring of glucose concentrations. The use of implanted glucose fluorescent sensors represents a promising approach. Due to its strong interaction with diol moieties, the boronic acid group often plays a critical role in the design of such glucose sensors. This paper reviews the progress in this area during the last ten years.     

Mixed micelles of benzyldimethyltetradecylammonium chloride with tetradecyltrimethylammonium and tetradecyltriphenylphosphonium bromides: a head group contribution

Mixed micelle formation by tetradecyltrimethylammonium (TTAB) and tetradecyltriphenylphosphonium bromides (TTPB) with benzyldimethyltetradecylammonium chloride (BTDACl) was studied with the help of conductivity and Kraft point measurements. The BTDACl + TTAB mixtures showed synergistic interactions whereas those of BTDACl + TTPB indicated weak antagonistic behavior. From Kraft temperature measurements, the enthalpy of fusion (H(1)(0)) from solid hydrated BTDACl to the liquid state in the presence of TTAB or TTPB was computed. It was found that DeltaH(1)(0) was much more positive for BTDACl + TTPB than for BTDACl + TTAB mixtures.