Direct determination of copper and zinc in cow milk, human milk and infant formula samples using electrothermal atomization atomic absorption spectrometry

Infant formula and powdered milk samples were suspended in a medium containing 20% ethanol, 0.65% nitric acid, 6% hydrogen peroxide and 0.1% ammonium dihydrogenphosphate and directly introduced in the electrothermal atomizer. Liquid milk samples were diluted with this suspension solution. The build-up of carbonaceous residues inside the atomizer was avoided by using a combination of hydrogen peroxide and nitric acid. Fast programs were used to simplify the heating cycles. Calibration was carried out using aqueous standards and the detection limits for copper and zinc were found to be 70 and 15 pg, respectively. The metal contents of several milk samples obtained by direct introduction of the samples agree with those obtained by means of a conventional procedure based on the total dissolution of the samples. The reliability of the methods was also confirmed by analyzing three certified reference materials. The free and protein binding fractions were measured by ultrafiltration membrane permeability of the milk samples.     

Determination of fungicide residues in fruits by coupled-column liquid chromatography

Coupled-column liquid chromatography with fluorescence detection was applied to the determination of o-phenylphenol and bitertanol residues in orange and banana fruits. After extraction with a mixture of acetone, dichloromethane-petroleum ether, and ethyl acetate, an extract aliquot of 100 microL was injected directly without any additional clean-up into the chromatographic system using two reversed phase C18 coupled columns. The LC-LC approach allowed automated sample clean up of the vegetal extracts, leading to a simple and rapid analytical procedure, with limits of quantification between 0.01 and 0.05 mg kg(-1). Recovery experiments performed on orange and banana samples fortified at different concentrations (0.01 - 4 mg kg(-1)) gave average recoveries between 70 and 113% with relative standard deviations lower than 15%. The procedure developed was finally applied to orange and banana samples from different geographical locations and the results were confirmed by GC-MS.     

Conformation of glycomimetics in the free and protein-bound state: structural and binding features of the C-glycosyl analogue of the core trisaccharide alpha-D-Man-(1 --> 3)-[alpha-D-Man-(1 --> 6)]-D-Man

The conformational properties of the C-glycosyl analogue of the core trisaccharide alpha-D-Man-(1 --> 3)-[alpha-D-Man-(1 --> 6)]-D-Man in solution have been carefully analyzed by a combination of NMR spectroscopy and time-averaged restrained molecular dynamics. It has been found that both the alpha-1,3- and the alpha-1,6-glycosidic linkages show a major conformational averaging. Unusual Phi ca. 60 degrees orientations for both Phi torsion angles are found. Moreover, a major conformational distinction between the natural compound and the glycomimetic affects to the behavior of the omega(16) torsion angle around the alpha-1 --> 6-linkage. Despite this increased flexibility, the C-glycosyl analogue is recognized by three mannose binding lectins, as shown by NMR (line broadening, TR-NOE, and STD) and surface plasmon resonance (SPR) methods. Moreover, a process of conformational selection takes place, so that these lectins probably bind the glycomimetic similarly to the way they recognize the natural analogue. Depending upon the architecture and extension of the binding site of the lectin, loss or gain of binding affinity with respect to the natural analogue is found.     

Application of principal component regression to luminescence data for the screening of ciprofloxacin and enrofloxacin in animal tissues

A new screening method for the analysis of enrofloxacin and ciprofloxacin in edible animal tissues is described. The method is based on the application of principal component regression to luminescence measurements after reaction of quinolones with terbium(III) in a micellar medium. The method was used, first, to discriminate between quinolone-containing or quinolone-not-containing samples (concentration below the detection limit) and, then, to quantify the sum of both analytes. Standards in a pure-water matrix, using the first three principal components, were used for the determination. RRMSE range from 4 to 10% depending on the analyte. Calibration was successfully applied to the analysis of spiked chicken and trout muscle at concentrations between 10 and 50 micrograms kg-1.     

Multivariate calibration methods for quantification in strongly overlapping capillary electrophoretic peaks

Capillary zone electrophoresis with diode-array detection was applied to the separation of ebrotidine and its metabolites. However, three of these, which are neutral in the conditions studied, co-migrated with the electroosmotic flow signal. Therefore, strongly overlapping peaks were observed. The main aim of this study was to show the potentiality of capillary electrophoresis in combination with chemometrics. Multivariate calibration methods were applied to quantify these analytes in synthetic mixtures. The results obtained using partial least squares (PLS) were in agreement with actual values, with an overall prediction error of 9.7%.     

Analysis of promazines in bovine livers by high performance liquid chromatography with ultraviolet and fluorimetric detection

Fluorimetric and UV methods of detection for liquid chromatographic determination of phenothiazines (chlorpromazine, acetopromazine and propionylpromazine) were developed. The effects of several experimental parameters on the separation and the sensitivity of the methods were evaluated. The detection limits ranged from 31 to 350 ng ml⁻¹. Optimized methods were successfully applied to determination of the promazines in bovine liver samples.     

Roles of TNF-alpha and IgE in the late phase of contact hypersensitivity induced by trimellitic anhydride

Trimellitic anhydride (TMA) is widely used industrially to make epoxy and alkyd resins, plasticizers and surfactants. The purpose of this study was to investigate whether contact hypersensitivity (CHS) is induced by repeated TMA challenge and the role of TNF-alpha and IgE in the TMA-induced CHS. The repetition of the challenge enlarged the extent of an early and a late phase of CHS in TNF-alpha+/+ (B6129SF2/J) and Balb/c mice. In the late phase of TMA-induced CHS, the peak of ear swelling responses by single challenge showed at 24 h after challenge, but the peak was observed at 8 h after repeated challenge. In the TNF-alpha knockout TNF-alpha-/- (B6;129S-Tnftm1Gk1) mice, the repetition of the TMA challenges enlarged the extent of the late phase of CHS, but less than those in TNF-alpha+/+ mice. Injection of anti-TNF-alpha antibody into the peritoneal cavity of Balb/c mice significantly decreased the extent of the late phase of CHS. Subcutaneous injection of anti-IgE antibody into Balb/c mice also decreased the extent of the late phase of CHS in dose-dependent manner. Histologically, infiltration of polymorphonuclear leukocytes and eosinophils was more pronounced in repeatedly TMA-challenged TNF-alpha+/+ and Balb/c mice than in the TNF-alpha-/- mice and anti-TNF-alpha or anti-IgE antibodies treated Balb/c mice. These results indicate that mice sensitized by TMA could possibly offer a useful model to study the mechanism of CHS, and TNF-alpha and IgE may act as potential modulators in the late phase of TMA-induced CHS. Neutralization of TNF-alpha and IgE by anti-TNF-alpha or anti-IgE antibodies may provide therapeutic tools for the treatment of TMA-induced CHS.     

On-line filtration system for determining total chromium and chromium in the soluble fraction of industrial effluents by flow injection flame atomic absorption spectrometry

Two manifolds were assessed for the purpose of determining both the total chromium content and that present as a soluble form in industrial effluents by flow injection flame atomic absorption spectrometry (FI-FAAS). To determine the chromium content in the soluble fraction the samples were used without additional treatment, a 0.45 microm filter being included in the FI system. To determine the total chromium content, the samples were acidified with nitric acid 20% (v/v) and heated for 30 s in a microwave oven (temperatures of about 70 degrees C were reached). The problem posed by the very different concentration range in which total and soluble chromium are present was overcome by using programmed flow rate methodology and by only partially emptying the sample loop. A personal computer controlled both the rotation speed of a peristaltic pump and the volume of sample injected into the system, thus obtaining the dispersion degree required. Using the manifold proposed, the chromium content in the soluble fraction can be determined in the 0.5-20 microg mL(-1) range using a 10 microg mL(-1) single standard for calibration. To determine the total chromium content, a calibration line in the 20-200 microg mL(-1) range was obtained using a single 50 microg mL(-1) chromium standard solution. The reliability of the semi-automatic devices was verified by comparing the results obtained with those found by treating the samples and using both FAAS in a conventional way and a spectrophotometric method using diphenylcarbazide at the 95% confidence level (ANOVA test). The proposed procedures showed a RSD lower than +/-3%.