Evaluation of backbone proton positions and dynamics in a small protein by liquid crystal NMR spectroscopy

NMR measurements of a large set of protein backbone one-bond dipolar couplings have been carried out to refine the structure of the third IgG-binding domain of Protein G (GB3), previously solved by X-ray crystallography at a resolution of 1.1 A. Besides the commonly used bicelle, poly(ethylene glycol), and filamentous phage liquid crystalline media, dipolar couplings were also measured when the protein was aligned inside either positively or negatively charged stretched acrylamide gels. Refinement of the GB3 crystal structure against the (13)C(alpha)-(13)C' and (13)C'-(15)N dipolar couplings improves the agreement between experimental and predicted (15)N-(1)H(N) as well as (13)C(alpha)-(1)H(alpha) dipolar couplings. Evaluation of the peptide bond N-H orientations shows a weak anticorrelation between the deviation of the peptide bond torsion angle omega from 180 degrees and the angle between the N-H vector and the C'-N-C(alpha) plane. The slope of this correlation is -1, indicating that, on average, pyramidalization of the peptide N contributes to small deviations from peptide bond planarity ( = 179.3 +/- 3.1 degrees ) to the same degree as true twisting around the C'-N bond. Although hydrogens are commonly built onto crystal structures assuming the N-H vector orientation falls on the line bisecting the C'-N-C(alpha) angle, a better approximation adjusts the C(alpha)-C'-N-H torsion angle to -2 degrees. The (15)N-(1)H(N) dipolar data do not contradict the commonly accepted motional model where angular fluctuations of the N-H bond orthogonal to the peptide plane are larger than in-plane motions, but the amplitude of angular fluctuations orthogonal the C(alpha)(i-1)-N(i)-C(alpha)(i) plane exceeds that of in-plane motions by at most 10-15 degrees. Dipolar coupling analysis indicates that for most of the GB3 backbone, the amide order parameters, S, are highly homogeneous and vary by less than +/-7%. Evaluation of the H(alpha) proton positions indicates that the average C(alpha)-H(alpha) vector orientation deviates by less than 1 degrees from the direction that makes ideal tetrahedral angles with the C(alpha)-C(beta) and C(alpha)-N vectors.     

Quantitative analysis of delta9-tetrahydrocannabinol in preserved oral fluid by liquid chromatography-tandem mass spectrometry

A rapid and sensitive method for the analysis of delta9-tetrahydrocannabinol (THC) in preserved oral fluid was developed and fully validated. Oral fluid was collected with the Intercept, a Food and Drug Administration (FDA) approved sampling device that is used on a large scale in the U.S. for workplace drug testing. The method comprised a simple liquid-liquid extraction with hexane, followed by liquid chromatography-tandem mass spectrometry (LC-MS-MS) analysis. Chromatographic separation was achieved using a XTerra MS C18 column, eluted isocratically with 1 mM ammonium formate-methanol (10:90, v/v). Selectivity of the method was achieved by a combination of retention time, and two precursor-product ion transitions. The use of the liquid-liquid extraction was demonstrated to be highly effective and led to significant decreases in the interferences present in the matrix. Validation of the method was performed using both 100 and 500 MicroL of oral fluid. The method was linear over the range investigated (0.5-100 ng/mL and 0. 1-10 ng/mL when 100 and 500 microL, respectively, of oral fluid were used) with an excellent intra-assay and inter-assay precision (relative standard deviations, RSD <6%) for quality control samples spiked at a concentration of 2.5 and 25 ng/mL and 0.5 and 2.5 ng/mL, respectively. Limits of quantification were 0.5 and 0.1 ng/mL when using 100 and 500 microL, respectively. In contrast to existing GC-MS methods, no extensive sample clean-up and time-consuming derivatisation steps were needed. The method was subsequently applied to Intercept samples collected at the roadside and collected during a controlled study with cannabis.     

Influence of organic ligands on the stabilization of palladium nanoparticles

The synthesis of palladium nanoparticles is performed by hydrogenation of a precursor, Pd₂(dba)₃ (1) or [Pd(C₃H₅)Cl]₂ (2) in the presence of either a weakly coordinating ligand (hexadecylamine, HDA) or good ligands (polyphosphines). It is shown in the case of 1 that good ligands lead to stable spherical nanoparticles of small size (near 2 nm) whereas the protective effect of HDA depends on the amount of ligand added as a result of equilibria present at the surface of the particles as monitored by solution NMR spectroscopy. The decomposition of 2 being very fast, the particle growth cannot be controlled except in the case of the use of a large excess of HDA which leads to spongelike particles resulting from the agglomeration of initially obtained nanocrystallites.     

Study of the mixed-metal lanthanummagnesium-purpurin complex: spectrophotometric determination of yttrium and lanthanides

Mixtures of La(III) and Mg(II) form with purpurin (P; 1,2,4-trihydroxyanthraquinone) the mixed-metal complex LaMg₂P₅, which is extracted with methyl isobutyl ketone at pH 7.5. The molar absorptivity of the complex is 6.1 × 10⁴ l.mole⁻¹.cm⁻¹ at 570 nm and its conditional extraction constant 5 × 10¹³ l⁴.mole⁻⁴. Similar complexes have been found to be formed with yttrium, cerium, praseodymium, neodymium and samarium. The use of these complexes for the spectrophotometric determination of yttrium and lanthanides up to 15 μg has been investigated.     

Silicon‐containing trifunctional and tetrafunctional cyanate esters: Synthesis,cure kinetics,and network properties

The synthesis and physical properties of new silicon‐containing polyfunctional cyanate ester monomers methyl[tris(4‐cyanatophenyl)]silane and tetrakis(4‐cyanatophenyl)silane, as well as polycyanurate networks formed from these monomers are reported. The higher crosslinking functionality compared to di(cyanate ester) monomers enables much higher ultimate glass transition temperatures to be obtained as a result of thermal cyclotrimerization. The ability to reach complete conversion is greatly enhanced by cocure of the new monomers with di(cyanate ester) monomers such as 1,1‐bis(4‐cyanatophenyl)ethane. The presence of silicon in these polycyanurate networks imparts improved resistance to rapid oxidation at elevated temperatures, resulting in char yields as high as 70% under nitrogen and 56% in air in the best‐performing networks. The water uptake in the silicon‐containing networks examined is 4–6 wt % after 96 h of immersion at 85 °C, considerably higher than both carbon‐containing and/or di(cyanate ester) analogs. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 767–779     

膜流动电位测试中Ag-AgCl电极的制备及稳定性研究

膜的动电特性研究中,往往采用流动电位方法。该方法中,Ag-Ag Cl测试电极的质量是影响测试准确性的关键要素。本文采用正交试验设计和方差分析,着重考察电解法制备Ag-Ag Cl电极过程中,电流强度(I)、氯化时间(t)、电解质溶液浓度(CHCl)、电极来源(n)、烘烤温度(T)、活化电极溶液浓度(CKCl)等因素对Ag-Ag Cl电极稳定性的影响。得到Ag-Ag Cl电极的最优制备参数为:电流密度3.0m A/cm2,氯化时间50min,盐酸浓度0.1mol·L-1,烘烤温度120℃,活化电极溶液(KCl)浓度0.001mol·L-1;最显著影响因素为电极来源,显著影响因素为氯化时间和烘烤温度。对最优条件组合下制备的AgAg Cl电极,进行了稳定性实验,结果表明:制备的电极具有较好的稳定性,24h内电极电位漂移量小于0.10mv,7天内电极电位漂移量小于0.2mv;在聚偏氟乙烯中空纤维超滤膜流动电位测试中,流动电位与流动压差具有良好的线性和可重复性,回归曲线R20.99,变化规律符合Helmholtz-Smoluehowski公式,可以较好满足膜的流动电位测试要求。     

Longitudinal 3D Blood Flow Distribution Provided by Diffuse Correlation Tomography during Bone Healing in a Murine Fracture Model

Noninvasive monitoring of vascularization can potentially diagnose impaired bone healing earlier than current radiographic methods. In this study, a noncontact diffuse correlation tomography (DCT) technique was employed to measure longitudinal blood flow changes during bone healing in a murine femoral fracture model. The three-dimensional distribution of the relative blood flow was quantified from one day pre-fracture to 48 days post-fracture. For three mice, frequent DCT measurements were performed every other day for one week after fracture, and then weekly thereafter. A decrease in blood flow was observed in the bone fracture region at one day post-fracture, followed by a monotonic increase in blood flow beyond the pre-injury baseline until five to seven days post-fracture. For the remaining 12 mice, only weekly DCT measurements were performed. Data collected on a weekly basis show the blood flow for most mice was elevated above baseline during the first two post-fracture weeks, followed by a subsequent decrease. Torsional strength of the excised femurs was measured for all 15 mice after 7 weeks of healing. A metric based on the early blood flow changes shows a statistically significant difference between the high strength group and the low strength group.     

Onion‐like Multifunctional Microtrap Vehicles for Attraction–Trapping–Destruction of Biological Threats

A multifunctional motile microtrap is developed that is capable of autonomously attracting, trapping, and destroying pathogens by controlled chemoattractant and therapeutic agent release. The onion‐inspired multi‐layer structure contains a magnesium engine core and inner chemoattractant and therapeutic layers. Upon chemical propulsion, the magnesium core is depleted, resulting in a hollow structure that exposes the inner layers and serves as structural trap. The sequential dissolution and autonomous release of the chemoattractant and killing agents result in long‐range chemotactic attraction, trapping, and destruction of motile pathogens. The dissolved chemoattractant (l ‐serine) significantly increases the accumulation and capture of motile pathogens (E. coli) within the microtrap structure, while the internal release of silver ions (Ag⁺) leads to lysis of the pathogen accumulated within the microtrap cavity.