Cufe2O4 Nanoparticles: A Magnetically Retrievable Catalyst for Green Synthesis of Novel 2-(3-(Dicyanomethyl)-2-Oxoindolin-3-Ylthio)Acetic Acids

Abstract

A highly efficient and green method for the synthesis of new 2-(3-(dicyanomethyl)-2-oxoindolin-3-ylthio)acetic acids is described using magnetically recoverable and reusable CuFe₂O₄ nanoparticles. A wide variety of aryl isatylidene malononitrils underwent Micheal addition with thioacids to afford novel 2-(3-(dicyanomethyl)-2-oxoindolin-3-ylthio)acetic acids in good to excellent yields. The reaction protocol is operationally simple and mild. Moreover, water as solvent makes the reaction procedure eco-friendly and economically viable. All products were characterized by NMR and IR spectroscopies.     

Effects of gold catalysts and thermal evaporation method modifications on the growth process of Zn1−xMgxO nanowires

In this paper, we investigate the roles of gold catalysts and thermal evaporation method modifications in the growth process of Zn_1−xMg_xO nanowires. Zn_1−xMg_xO nanowires are fabricated on silicon substrates with and without using a gold catalyst. Characterizations reveal that Mg acts in a self-catalyst role during the growth process of Zn_1−xMg_xO nanowires grown on catalyst-free substrate. The optical properties and crystalline quality of the Zn_1−xMg_xO nanowires are characterized by room temperature photoluminescence (PL) measurements and Raman spectroscopy, respectively. The Raman and PL studies demonstrate that the Zn_1−xMg_xO nanowires grown using the catalyst-free method have good crystallinity with excellent optical properties and have a larger band-gap in comparison to those grown with the assistance of gold.     

DNA‐backbone radio resistivity induced by spin blockade effect

Coherent control of OH‐free radicals interacting with the spin‐triplet state of a DNA molecule is investigated. A model Hamiltonian for molecular spin singlet‐triplet resonance is developed. We illustrate that the spin‐triplet state in DNA molecules can be efficiently populated, as the spin‐injection rate can be tuned to be orders of magnitudes greater than the decay rate due to small spin‐orbit coupling in organic molecules. Owing to the nano‐second life‐time of OH free radicals, a non‐equilibrium free energy barrier induced by the injected spin triplet state that lasts approximately longer than one‐micro second in room temperature can efficiently block the initial Hydrogen abstraction and DNA damage. For a direct demonstration of the spin‐blockade effect, a molecular simulation based on an ab‐initio Car‐Parrinello molecular dynamics is deployed. © 2010 Wiley Periodicals, Inc. J Comput Chem 2010     

Doughnut-shaped peptide nano-assemblies and their applications as nanoreactors

Doughnut-shaped nanoreactors, peptide nano-doughnuts, were self-assembled from peptides and organic Au salts. We demonstrated that monodisperse Au nanocrystals were synthesized inside the cavities of peptide nano-doughnuts by the reduction of Au ions and the size of the Au nanocrystal was controlled by the cavity dimension. The Au nanocrystals inside the nano-doughnuts were extracted by destroying the nano-doughnuts via long UV irradiation (>10 h). These features may allow the peptide nano-doughnuts to be applied in the fields of nanomaterial syntheses, controlled release systems, and drug delivery.     

Poly(N-bromo-N-ethylbenzene-1,3-disulfonamide) and N,N,N′,N′-tetrabromobenzene-1,3-disulfonamide as efficient reagents for synthesis of quinolines

Poly(N-bromo-N-ethylbenzene-1,3-disulfonamide) [PBBS] and N,N,N′,N′-tetrabromobenzene-1,3-disulfonamide [TBBDA] were used as efficient reagents for the synthesis of quinolines in excellent yields from 2-aminoaryl ketones and carbonyl compounds under aqueous and solvent-free conditions.     

Determination of Trace Methyl Tert‐Butyl Ether in Water Samples Using Dispersive Liquid‐Liquid Microextraction Coupled with GC‐FID

A rapid and sensitive analytical method has been developed for trace analysis of methyl tert‐butyl ether (MTBE) in water samples using dispersive liquid‐liquid microextraction and gas chromatography with flame ionization detection. Factors relevant to the microextraction efficiency, such as the kind of extraction solvent, the disperser solvent and their volumes, the effect of salt, sample solution temperature and the extraction time were investigated and optimized. Under the optimal conditions the linear dynamic range of MTBE was from 0.2 to 25.0 μg L^?1 with a correlation coefficient of 0.9981 and a detection limit of 0.1 μg L^?1. The relative standard deviation (RSD%) was less than 5.1% (n = 3) and the recovery values were in the range of 97.8 ± 0.9%. Finally, the proposed method was successfully applied for the analysis of MTBE in aqueous samples.     

Dispersive Liquid‐Liquid Microextraction Followed by HPLC‐DAD as an Efficient and Sensitive Technique for the Determination of Patulin from Apple Juice and Concentrate Samples

A simple and sensitive method based on dispersive liquid‐liquid microextraction (DLLME) in conjunction with high performance liquid chromatography‐diode array detection (HPLC‐DAD) has been developed for the quantitative analysis of patulin in apple juice and concentrate samples. The effect of extraction and disperser solvent (nature and volume), pH of sample solution, extraction time and extraction temperature was investigated. Under the optimal conditions the linear dynamic range of patulin was from 8.0 to 40.0 μg L^‐1 with a correlation coefficient of 0.9993 and a detection limit of 4.0 μg L^‐1. The relative standard deviation (RSD) was less than 5.9% (n = 5) and the recovery values were in the range of 94‐97%. Finally the proposed method was successfully applied for the analysis of patulin in apple juice and concentrate samples.     

Parallel, fluorous open-tubular chromatography using microstructured fibers

Although commonly used in gas chromatography, open-tubular columns for liquid chromatography have seen their development hindered by a number of factors both theoretical and practical. Requiring small diameters, great lengths and specialized detection systems to achieve a proper chromatographic response, columns of this sort have largely been ignored despite the highly desirable column performance an optimized system would provide. Here, we introduce the use of microstructured fibers (MSFs) as a platform for the development of multiplexed open-tubular liquid chromatography (OTLC) columns. The multiple, parallel silica channels presented by the MSF act as a promising substrate for an OTLC column, as they have diameters near the ideal range for interactions (1–3 μm), minimize flow-induced backpressure through their many uniform paths, and increase the loading capacity compared to a single capillary channel of similar size. Additionally, with outer diameters comparable to regular fused silica capillaries, MSFs can easily be employed in conventional chromatographic systems, eliminating the need for specialized equipment. Finally, MSF columns of this type can be functionalized using silane coupling techniques to allow the introduction of a wide variety of stationary phase chemistries. While in this report we explore the potential and limitations of fluorine-functionalized MSFs as OTLC columns, other stationary phase materials could easily be substituted by choosing appropriate silanization reagents. Particular attention here will be paid to the physical and performance characteristics of the fabricated columns, as well as avenues for their improvement and implementation.     

Efficient synthesis of a new ditopic bipyridine–terpyridine bridging ligand

Abstract

The novel bipyridine–terpyridine–phenazine ligand 6-pyrid-(tetrapyrido[2,3-a:2′,3′-c:3′′,2′′-h:2′′′,3′′′-j]phenazine (I) was prepared by condensation reaction of 5,6-diamino-l,10-phenanthroline (4) and 2-(pyrid-2′-yl)-1,10-phenanthroline-5,6-dione (6) and characterized using conventional methods. Poor solubility of the ligand led us to the preparation of its Ru(II) complexes to investigate the change in its solubility for further characterizing the ligand on the metal ion. [Ru(ttp)(I)](PF₆)₂ complex was prepared using the reaction of the ligand (I) and [Ru(ttp)Cl₃] complex, where ttp is 4′-(4-Methylphenyl)-2,2′:6′,2′′-terpyridine. A different route for the preparation of [Ru(ttp)(I)](PF₆)₂ was introduced. Synthesis of the ligand (I) on the complex by a condensation reaction of [Ru(ttp)(6)](PF₆)₂, where ligand (6) is 2-(pyrid-2′-yl)-1,10-phenanthroline-5,6-dione, with 5,6-diamino-l,10-phenanthroline (4) was conducted. The spectroscopic measurements of both products which have been obtained through the two different routes were compared. We observed that the NMR, LC-MS, and UV spectra of the both products were identical.