RP-HPLC method for simultaneous estimation of lamivudine, tenofovir disoproxil fumarate and efavirenz in tablet formulation

A simple, rapid, and precise reversed-phase high-performance liquid chromatographic method for the simultaneous determination of lamivudine, tenofovir disoproxil fumarate and efavirenz in bulk and tablet dosage form has been developed and validated. Chromatography was performed on a 150 mm × 4.6 mm i.d., 5-μm particle, Phenomenex Luna C₁₈ column with 30: 45: 25 (v/v/v) acetonitrile: methanol: water as mobile phase at a flow rate of 0.5 mL/min. UV detection was done at 258 nm; lamivudine, tenofovir disoproxil fumarate and efavirenz were eluted with retention times of 3.27, 4.58 and 10.90 min, respectively. The method was validated in accordance with ICH guidelines. Validation revealed the method is specific, rapid, accurate, precise, reliable and reproducible. Calibration plots were linear over the concentration ranges 1–6 μg/mL for lamivudine and tenofovir disoproxil fumarate and 2–12 μg/mL for efavirenz. Limits of detection were 0.05, 0.09 and 0.11 μg/mL and limits of quantification were 0.15, 0.28 and 0.34 μg/mL for lamivudine, tenofovir disoproxil fumarate and efavirenz, respectively. The high recovery and low coefficients of variation confirm the suitability of the method for the simultaneous determination of these three drugs in bulk and tablets.     

Construction of anion‐responsive crosslinked polypseudorotaxane based on molecular recognition of pillar[5]arene

A pillar[5]arene pendant polymer (Poly‐P[5]A) is synthesized via ROMP using Grubb's first‐generation catalyst. GPC analysis of the polymer suggested ~30 pendant pillar[5]arene units in the polymer. Supramolecular polypseudorotaxane assembly is constructed by intermolecularly crosslinking pendant pillar[5]arene units using a bispyridinium guest via host–guest complexation. Formation of the polypseudorotaxane assembly is characterized by 1D/2D NMR techniques and DLS analysis. Moreover, anion‐responsiveness of the polypseudorotaxane assembly is demonstrated by ¹H NMR spectroscopic analysis using chloride anion as external stimulus. Scanning electron microscopic analysis of the poly‐P[5]A showed breath‐figure assembly and upon crosslinking with G.2PF₆ the polymer self‐assemble to give a supramolecular polymer network. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1508–1515     

Novel Synthesis of (E)-3-Arylidene-2,3-dihydrobenzo[b][1,4]oxazepin-4(5H)-ones Using Baylis–Hillman Derivatives via Reductive Cyclization

A simple synthesis of novel (E)-3-arylidene-2,3-dihydrobenzo[b][1,4]oxazepin-4(5H)-ones from bromides of the Baylis--Hillman adducts using Fe/AcOH for the in situ reduction of nitro group, into an amino group, followed by the cyclization as a key step, has been described.     

Green synthesis of naphtho[2,3-f]quinolin-13-one and naphtho[2,3-a]acridin-1(2H)-one derivatives catalyzed by heteropoly acid supported montmorillonite K-10 clay

Herein, synthesis of a series of naphtho[2,3-f]quinolin-13-one and naphtho[2,3-a]acridin-1(2H)-one derivatives directly by one-pot multi-component reaction of 1,3-dicarbonyl compounds (1,3-indanedione/1,3-cyclohexanedione), 2-aminoantharacene/2-naphthylamine and various substituted aldehydes under solvent-free conditions using heteropoly-11-molybdo-1-vanadophosphoric acid supported on montmorillonite K-10 clay catalyst (10% PVMoK-10) is reported. The successful formation of naphtho[2,3-f]quinolin-13-one and naphtho[2,3-a]acridin-1(2H)-one derivatives was confirmed by various spectroscopic techniques. This study offers a green approach for the synthesis of novel quinolinone derivatives.     

Acetylene-Mediated Borophosphene Dirac Materials as Efficient Anode Materials for Lithium-Ion Batteries

Generally, graphynes have been generated by the insertion of acetylenic content (−C≡C−) in the graphene network in different ratios. Also, several aesthetically pleasing architectures of two-dimensional (2D) flatlands have been reported with the incorporation of acetylenic linkers between the heteroatomic constituents. Prompted by the experimental realization of boron phosphide, which has provided new insights on the boron-pnictogen family, we have modelled novel forms of acetylene-mediated borophosphene nanosheets by joining the orthorhombic borophosphene stripes with different widths and with different atomic constituents using acetylenic linkers. Structural stabilities and properties of these novel forms have been assessed using first-principles calculations. Investigation of electronic band structure elucidates that all the novel forms show the linear band crossing closer to the Fermi level at Dirac point with distorted Dirac cones. The linearity in the hole and electronic bands impose the high Fermi velocity to the charge carriers close to that of graphene. Finally, we have also unravelled the propitious features of acetylene-mediated borophosphene nanosheets as anodes in Li-ion batteries.     

Design,synthesis, and antibacterial studies of potent pyrazolinyltriazoles

Research on Chemical Intermediates - A library of pyrazolinyltriazole hybrids (3a–l, 4a–l) was synthesized via azide–alkyne dipolar (Huisgen) cycloaddition of azidoacetyl...     

Lithium garnet based free-standing solid polymer composite membrane for rechargeable lithium battery

Electrolytes with high lithium-ion conductivity, better mechanical strength and large electrochemical window are essential for the realization of high-energy density lithium batteries. Polymer electrolytes are gaining interest due to their inherent flexibility and nonflammability over conventional liquid electrolytes. In this work, lithium garnet composite polymer electrolyte membrane (GCPEM) consisting of large molecular weight (W_avg ~?5?×?10⁶) polyethylene oxide (PEO) complexed with lithium perchlorate (LiClO₄) and lithium garnet oxide Li_6.28Al_0.24La₃Zr₂O₁₂ (Al-LLZO) is prepared by solution-casting method. Significant improvement in Li⁺ conductivity for Al-LLZO containing GCPEM is observed compared with the Al-LLZO free polymer membrane. Maximized room temperature (30 °C) Li⁺ conductivity of 4.40?×?10^?4 S cm^?1 and wide electrochemical window (4.5 V) is observed for PEO₈/LiClO₄?+?20 wt% Al-LLZO (GCPEM-20) membrane. The fabricated cell with LiCoO₂ as cathode, metallic lithium as anode and GCPEM-20 as electrolyte membrane delivers an initial charge/discharge capacity of 146 mAh g^?1/142 mAh g^?1 at 25 °C with 0.06 C-rate.     

Bismuth Oxyiodide Nanoflakes Showed Toxicity Against the Malaria Vector <Emphasis Type="Italic">Anopheles stephensi</Emphasis> and In Vivo Antiplasmodial Activity

Anopheles stephensi is a mosquito vector of malaria, which is still considered a relevant public health problem due to increasing outdoor transmission, growing resistance to insecticides used to target vectors, and antiplasmodial drugs as well. Thus, there is a vital need to explore novel sources of effective compounds. In this study, the hydrothermal method was used for the synthesis of bismuth oxyiodide (BiOI) nanoflakes. Furthermore, the toxicity of BiOI nanoflakes was evaluated for the first time on A. stephensi, as well as in vivo against the malaria parasite Plasmodium berghei. The synthesis of BiOI nanoflakes was confirmed by various characterization techniques, including X-ray diffraction, Fourier transform-infrared spectroscopy, field emission scanning electron microscopy and transmission electron microscopy (HR-TEM). LC₅₀ of BiOI nanoflakes on A. stephensi were 2.263 ppm (larva I), 3.414 ppm (II), 4.956 ppm (III), 6.983 ppm (IV) and 8.605 ppm (pupae). In vivo antiplasmodial experiments conducted on P. berghei infecting albino mice showed 27.2% of chemosuppression after 4 days of treatment with 300 mg/kg/day of BiOI, a lower performance if compared to chloroquine. Overall, our results suggested that hydrothermal synthesis of BiOI nanoflakes may be considered to develop newer and safer tools for malaria vector control.     

One-pot multi-component synthesis of N,N′-alkylidene bisamides and imidazoles using heteropoly-11-tungsto-1-vanadophosphoric acid supported on natural clay as catalyst: A green approach

One-pot multi-component synthesis of N,N′-alkylidene bisamides, 2,4,5-trisubstituted imidazoles and 1,2,4,5-tetrasubstituted imidazoles in the presence of catalytic material heteropoly-11-tungsto-1-vanadophosphoric acid (HPV) supported on activated natural clay for about 20% (HPVAC-20) under solvent-free reaction condition have been achieved. Green heterogeneous reaction condition, simple workup procedure, short reaction time, high yield of products, and reusability of the catalyst are the advantages of this protocol.     

Pressure-induced ordering in adamantane: a Monte Carlo simulation study

Isothermal-isobaric ensemble Monte Carlo simulation of adamantane has been carried out with a variable shape simulation cell. The low-temperature crystalline phase and the room-temperature plastic crystalline phases have been studied employing the modified Williams potential. We show that at room temperature, the plastic crystalline phase transforms to the crystalline phase on increase in pressure. Further, we show that this is the same phase as the low-temperature ordered tetragonal phase of adamantane. The high-pressure ordered phase appears to be characterized by a slightly larger shift of the first peak toward a lower value of r in C-C, C-H, and H-H radial distribution functions as compared to the low-temperature tetragonal phase. The coexistence curve between the crystalline and plastic crystalline phase has been obtained approximately up to a pressure of 4 GPa.