Preparation of α-oxygenated ketones by the dioxygenation of alkenyl boronic acids

Two in two: Dioxygenation of alkenyl boronic acids has been achieved with N-hydroxyphthalimide. The two-step process involves etherification of an alkenyl boronic acid with N-hydroxyphthalimide followed by a [3,3] rearrangement. The dioxygenated product can then be hydrolyzed to form either the corresponding α-hydroxy ketone or the α-benzoyloxy ketone.     

Coherent crosstalk in passive microring based Optical Networks-on-Chip

Optical Networks-on-Chip (ONoC) is emerging technology for future optical interconnects used in all optical networks. The electrical interconnects face lot of problems due to their inability to support higher data rates used in the System-on-Chip (SoC) technologies. Integrated optical interconnects based on SoC avoid this bottleneck with their support to higher data rates. In this paper for the first time we have studied and analyzed ONoC at physical level for the system performance based on crosstalk, BER, throughput, system frequency, and other related parameters. The investigation of ONoC performance is carried out for the multistage microring optical crossconnect on SoC for coherent WDM signals. The analysis can be used in the design of ultra-high speed photonic routers for reliable data communication and processing. The results show the dependency of a coherent crosstalk on the system frequency of SoC and also illustrate the reduction in throughput with increase in number of WDM signals due to higher probability of packet transmission. Minimum 2 dB signal to noise ratio can be obtained when crosstalk is ?25 dB with 60 wavelengths for probability of packet transmission is 0.5.     

Fluoranthene based fluorescent chemosensors for detection of explosive nitroaromatics

A novel fluoranthene based fluorescent chemosensor for the detection of picric acid (PA) at the parts per billion (ppb) level was evaluated. Static fluorescence quenching was the dominant process by intercalative π-π interaction between fluoranthene (S(1)) and nitroaromatics.     

FTIR and thermal studies on gel grown neodymium tartrate crystals

The growth of neodymium tartrate crystals was achieved in silica gel by single diffusion method. Optimum conditions were established for the growth of good quality crystals. Fourier transform infrared (FT-IR) spectroscopic study indicates the presence of water molecules and tartrate ligands and suggests that tartrate ions are doubly ionised. The thermal behaviour of the material was studied using thermogravimetry (TG), differential thermal analysis (DTA), derivative thermogravimetry (DTG) and differential scanning calorimetry (DSC). Thermogravimetric analysis support the suggested chemical formula of the grown crystal to be Nd₂(C₄H₄O₆)₃·7H₂O, and the presence of seven water molecules as water of hydration. It is shown that the material is thermally stable up 45 °C beyond which it decomposes through many stages till the formation of neodymium oxide (Nd₂O₃) at 995 °C. The decomposition pattern is reported to be typical of a hydrated metal tartrate.     

New Cu-based catalysts supported on TiO2 films for Ullmann S(N)Ar-type C-O coupling reactions

New routes for the preparation of highly active TiO(2)-supported Cu and CuZn catalysts have been developed for C-O coupling reactions. Slurries of a titania precursor were dip-coated onto glass beads to obtain either structured mesoporous or non-porous titania thin films. The Cu and CuZn nanoparticles, synthesized using a reduction by solvent method, were deposited onto calcined films to obtain a Cu loading of 2 wt%. The catalysts were characterized by inductively coupled plasma (ICP) spectroscopy, temperature-programmed oxidation/reduction (TPO/TPR) techniques, (63)Cu nuclear magnetic resonance (NMR) spectroscopy, X-ray diffraction (XRD), scanning and transmission electron microscopy (S/TEM-EDX) and X-ray photo-electron spectroscopy (XPS). The activity and stability of the catalysts obtained have been studied in the C-O Ullmann coupling of 4-chloropyridine and potassium phenolate. The titania-supported nanoparticles retained catalyst activity for up to 12 h. However, catalyst deactivation was observed for longer operation times due to oxidation of the Cu nanoparticles. The oxidation rate could be significantly reduced over the CuZn/TiO(2) catalytic films due to the presence of Zn. The 4-phenoxypyridine yield was 64% on the Cu/nonporous TiO(2) at 120 °C. The highest product yield of 84% was obtained on the Cu/mesoporous TiO(2) at 140 °C, corresponding to an initial reaction rate of 104 mmol g(cat) (-1) s(-1). The activation energy on the Cu/mesoporous TiO(2) catalyst was found to be (144±5) kJ mol(-1), which is close to the value obtained for the reaction over unsupported CuZn nanoparticles (123±3 kJ mol(-1)) and almost twice the value observed over the catalysts deposited onto the non-porous TiO(2) support (75±2 kJ mol(-1)).     

A one-pot catalysis: the strategic classification with some recent examples

In this "Emerging Area", the strategic classification of one-pot catalysis, i.e. cooperative, relay and sequential catalysis, is described. In order to illustrate this classification, we take the readers through a series of recent examples which utilize either metal-metal, metal-organo and organo-organo catalysts. The compilation clearly demonstrates the explosive growth and power of this field, which has become, in the last few years, an important technique particularly in the case of enantioselective catalysis.     

Development and validation of rapid ion-pair RPLC method for simultaneous determination of certain B-complex vitamins along with vitamin C

A rapid, simple, and accurate ion-pair RPLC method has been developed for simultaneous analysis of vitamin C and major B-complex vitamins. An RP C18 column thermostated at 30 degrees C was used with gradient elution of mobile phase comprising 10 mM potassium dihydrogen phosphate buffer (containing 3 mM sodium hexane-1-sulfonate, adjusted to pH 2.80 with o-phosphoric acid) and methanol at a flow rate of 1.0 mL/min to achieve the best possible separation and resolution of all vitamins in about 11.00 min. The detection was performed at 274 nm. The method has been implemented successfully for simultaneous determination of vitamins present in 12 multivitamin/multimineral pharmaceutical preparations, as well as in human urine. Typical validation characteristics were evaluated in accordance with International Conference on Harmonization guidelines. Good linearity over the investigated concentration levels was observed. Intraday repeatability was < or = 2.0%, and interday variation was < or = 2.6%, for all vitamins. The method can be used for assay of these vitamins over a wide concentration range with good precision and accuracy; hence, it would be appropriate for routine QC as well as in clinical analysis.     

Validated LC–MS/MS method for quantification of agomelatine in human plasma and its application in a pharmacokinetic study

An analytical method based on liquid–liquid extraction has been developed and validated for analysis of agomelatine in human plasma. Fluoxetine was used as an internal standard for agomelatine. A Betasil C18 (4.0 × 100 mm, 5 µm) column provided chromatographic separation of analytes followed by detection with mass spectrometry. The method involves simple isocratic chromatographic conditions and mass spectrometric detection in the positive ionization mode using an API‐4000 system. The proposed method has been validated with linear range of 0.050–8.000 ng/ml for agomelatine. The intra‐run and inter‐run precision values are within 12.12% and 9.01%, respectively, for agomelatine at the lower limit of quantification level. The overall recovery for agomelatine and fluoxetine was 67.10% and 72.96%, respectively. This validated method was used successfully for analysis of plasma samples from a pharmacokinetic study. Copyright © 2012 John Wiley & Sons, Ltd.     

Direct determination of tri-<Emphasis Type="Italic">n</Emphasis>-butyl phosphate by HPLC and GC methods

The high performance liquid chromatography and gas chromatography methods were investigated for their applicability in determining micro-level concentrations of tri-n-butyl phosphate (TBP). A high performance liquid chromatograph (HPLC) equipped with refractive index detector was used in determining TBP up to 2 ppm concentration level in the aqueous nitric acid solutions. The gas chromatography incorporated with Thermionic Detector (NPD) and Flame Photometric Detector (FPD) were examined for their potential in analyzing TBP in organic phase up to sub-ppm level. The results indicated that HPLC-RI technique is well suited for direct analysis of aqueous phase. For organic phase analysis, gas chromatographic methods with the TID and FPD were suitable but performance of detectors deteriorated often due to fouling.     

A numerical study of crack tip constraint in ductile single crystals

In this work, the effect of crack tip constraint on near-tip stress and deformation fields in a ductile FCC single crystal is studied under mode I, plane strain conditions. To this end, modified boundary layer simulations within crystal plasticity framework are performed, neglecting elastic anisotropy. The first and second terms of the isotropic elastic crack tip field, which are governed by the stress intensity factor K and T-stress, are prescribed as remote boundary conditions and solutions pertaining to different levels of T-stress are generated. It is found that the near-tip deformation field, especially, the development of kink or slip shear bands, is sensitive to the constraint level. The stress distribution and the size and shape of the plastic zone near the crack tip are also strongly influenced by the level of T-stress, with progressive loss of crack tip constraint occurring as T-stress becomes more negative. A family of near-tip fields is obtained which are characterized by two terms (such as K and T or J and a constraint parameter Q) as in isotropic plastic solids.