Adsorption of phosphate from seawater on calcined MgMn-layered double hydroxides

Adsorptive properties of MgMn-3-300 (MgMn-type layered double hydroxide with Mg/Mn mole ratio of 3, calcined at 300 degrees C) for phosphate were investigated in phosphate-enriched seawater with a concentration of 0.30 mg-P/dm3. It showed the highest phosphate uptake from the seawater among the inorganic adsorbents studied (hydrotalcite, calcined hydrotalcite, activated magnesia, hydrous aluminum oxide, manganese oxide (delta-MnO2)). The phosphate uptake by MgMn-3-300 reached 7.3 mg-P/g at an adsorbent/solution ratio of 0.05 g/2 dm3. The analyses of the uptakes of other constituents (Na+, K+, Ca(+, Cl-, and SO(2-)4) of seawater showed that the adsorbent had a markedly high selectivity for the adsorption of phosphate ions. Effects of initial phosphate concentration, temperature, pH, and salinity on phosphate uptake were investigated in detail by a batch method. The phosphate uptake increased slightly with an increase in the adsorption temperature. The adsorption isotherm followed Freundlich's equation with constants of logK(F)=1.25 and 1/n=0.65, indicating that it could effectively remove phosphate even from a solution of markedly low phosphate concentration as well as with large numbers of coexisting ions. The pH dependence showed a maximum phosphate uptake around pH 8.5. The pH dependence curve suggested that selective phosphate adsorption progresses mainly by the ion exchange of HPO(2-)4. The study on the effect of salinity suggested the presence of two kinds of adsorption sites in the adsorbent: one nonspecific site with weak interaction and one specific site with strong interaction. The effective desorption of phosphate could be achieved using a mixed solution of 5 M NaCl + 0.1 M NaOH (1 M = 1 mol/dm3), with negligible dissolution of adsorbent. The adsorbent had high chemical stability against the adsorption/desorption cycle; it kept a good phosphate uptake even after the repetition of the seventh cycle.     

Ruthenium(III) complexes of amine-bis(phenolate) ligands as catalysts for transfer hydrogenation of ketones

Twelve ruthenium(III) complexes bearing amine-bis(phenolate) tripodal ligands of general formula [Ru(L¹–L³)(X)(EPh₃)₂] (where L¹–L³ are dianionic tridentate chelator) have been synthesized by the reaction of ruthenium(III) precursors [RuX₃(EPh₃)₃] (where E = P, X = Cl; E = As, X = Cl or Br) and [RuBr₃(PPh₃)₂(CH₃OH)] with the tripodal tridentate ligands H₂L¹, H₂L² and H₂L³ in benzene in 1:1 molar ratio. The newly synthesized complexes have been characterized by analytical (elemental and magnetic susceptibility) and spectral methods. The complexes are one electron paramagnetic (low-spin, d⁵) in nature. The EPR spectra of the powdered samples at RT and the liquid samples at LNT shows the presence of three different ‘g’ values (g_x ≠ g_y ≠ g_z) indicate a rhombic distortion around the ruthenium ion. The redox potentials indicate that all the complexes undergo one electron transfer process. The catalytic activity of one of the complexes [Ru(pcr-chx)Br(AsPh₃)₂] was examined in the transfer hydrogenation of ketones and was found to be efficient with conversion up to 99% in the presence of isopropanol/KOH.     

Synthesis and structural characterization of Pd(II) thiosemicarbazonato complex: Catalytic evaluation in synthesis of diaryl ketones from aryl aldehydes and arylboronic acids

A simple route to synthesize triphenylphosphinopalladium(II) thiosemicarbazonato complex has been described. Elemental analysis, spectral (IR, NMR) and single crystal X-ray diffraction techniques were employed for the complete characterization of the complex. The latter was found to be effective catalyst for carbon–carbon cross-coupling reaction of aryl- and heteroarylboronic acids with aromatic and heteroaromatic aldehydes to form the corresponding diaryl ketones. The influence of reaction parameters such as solvent, base, reaction temperature and catalyst loading was also investigated.     

Simple and one-pot synthesis of tri and tetracyclic frameworks containing [1,8]naphthyridin-2-one moiety from the Baylis-Hillman adducts

A facile synthesis of tri and tetracyclic frameworks containing [1,8]naphthyridin-2-one skeleton from the Baylis-Hillman alcohols via the Johnson-Claisen rearrangement, followed by the treatment with Fe/AcOH in simple one-pot multi-step process is described.     

Binuclear ruthenium(II) pyridazine complex catalyzed transfer hydrogenation of ketones

A convenient and general method of synthesis of binuclear ruthenium(II) pyridazine complex was reported. The synthesized complex was characterized by analytical and spectral methods. The structure of the complex was confirmed by X-ray diffraction technique and was found to be an efficient catalyst for the transfer hydrogenation of ketones with excellent conversions in the presence of isopropanol/KOH at 82 °C. The effect of solvents, bases, and different catalyst/substrate ratio for the reaction was also investigated.     

Validation and clinical application of an LC‐ESI‐MS/MS method for simultaneous determination of tolmetin and MED5, the metabolites of amtolmetin guacil in human plasma

A highly sensitive, rapid assay method has been developed and validated for the simultaneous estimation of tolmetin (TMT) and MED5 in human plasma with liquid chromatography coupled to tandem mass spectrometry with electrospray ionization in the positive‐ion mode. A simple solid‐phase extraction process was used to extract TMT and MED5 along with mycophenolic acid (internal standard, IS) from human plasma. Chromatographic separation was achieved with 0.2% formic acid–acetonitrile (25:75, v/v) at a flow rate of 0.50 mL/min on an X‐Terra RP₁₈ column with a total run time of 2.5 min. The MS/MS ion transitions monitored were 258.1 → 119.0 for TMT, 315.1 → 119.0 for MED5 and 321.2 → 207.0 for IS. Method validation and clinical sample analysis were performed as per FDA guidelines and the results met the acceptance criteria. The lower limit of quantitation achieved was 20 ng/mL and the linearity was observed from 20 to 2000 ng/mL, for both the anlaytes. The intra‐day and inter‐day precisions were in the range 3.27–4.50 and 5.32–8.18%, respectively for TMT and 4.27–5.68 and 5.32–8.85%, respectively for MED5. This novel method has been applied to a clinical pharmacokinetic study. Copyright © 2010 John Wiley & Sons, Ltd.     

A novel demonstration of photoacoustic Raman spectroscopy with combined stimulated Raman pumping in H2 molecule

We present the experimental demonstration of a novel, efficient, and vibrational selective technique to prepare population in vibrational level v″ = 1 using the stimulated Raman pumping. Photoacoustic Raman signal has been studied in non-radiative transitions in the molecule H₂ (v″ = 0) and (v″ = 1). The population fraction in the v″ = 1 level can be estimated by using combined photoacoustic Raman spectroscopy with stimulated Raman pumping for the first time.     

Rocks,Shocks and Asteroids,and Some Interesting Research Directions in Mechanics

Mechanics lies at the heart of many of the underpinnings of modern technological civilization: materials, infrastructure, transportation, health and security. The mechanics of dynamic failure processes also has a major bearing on the potential catastrophes that threaten civilization, including airbursts and major asteroid impacts. Recent events (such as the Chelyabinsk meteoroid) have demonstrated the need to understand major impact and fragmentation events. Many of the fundamental problems of current interest in national security also involve impact and fragmentation, typically studied through large-scale computational simulations. In the Murray lecture, these issues were addressed by describing fundamental high-strain-rate experiments, high-speed visualization, theoretical and computational modeling of failure processes, and simulations of asteroid damage and disruption. This paper focuses on experimental results on meteorites and a basalt.     

Release studies on niosomes containing fatty alcohols as bilayer stabilizers instead of cholesterol

Monomers of some amphiphiles organize into bilayers to form liposomes and niosomes. Such bilayers are unstable or leaky and hence cholesterol is a common ingredient included to stabilize them. Cholesterol stabilizes bilayers, prevents leakiness, and retards permeation of solutes enclosed in the aqueous core of these vesicles. Other than cholesterol a material with good bilayer-stabilizing properties is yet to be identified. We have substituted cholesterol with fatty alcohols in niosomes containing polyglyceryl-3-di-isostearate (PGDS) and polysorbate-80 (PS-80) to explore their membrane-stabilizing property via permeation studies. Niosomes of polyglyceryl-3-di-isostearate, fatty alcohol/cholesterol, and polysorbate were prepared by ether injection method. Aqueous solution of ketorolac tromethamine (KT) was entrapped in them. The effects of alkyl chain length of fatty alcohols (C(12), C(14), C(16), C(18), and C(16+18)), of acyl chain length of polyoxyethylene sorbitan monoester surfactants, and of the molar ratio of lipid mixture on the release rate of ketorolac from niosomes were assessed by employing modified dissolution-dialysis method. Niosomes with cholesterol or fatty alcohols have exhibited a common release pattern. Niosomes containing fatty alcohol showed a considerably slower release rate of KT than those containing cholesterol. Based on the release rate, fatty alcohols can be ranked as stearyl相似文献