Near-resonant energy transfer from highly vibrationally excited OH to N2

The probability per collision P(T) of near-resonant vibration-to-vibration energy transfer (ET) of one quantum of vibrational energy from vibrational levels nu=8 and nu=9 of OH to N(2)(nu=0), OH(nu)+N(2)(0)-->OH(nu-1)+N(2)(1), is calculated in the 100-350 K temperature range. These processes represent important steps in a model that explains the enhanced 4.3 microm emission from CO(2) in the nocturnal mesosphere. The calculated energy transfer is mediated by weak long-range dipole-quadrupole interaction. The results of this calculation are very sensitive to the strength of the two transition moments. Because of the long range of the intermolecular potential, the resonance function, a measure of energy that can be efficiently exchanged between translation and vibration-rotation degrees of freedom, is rather narrow. A narrow resonance function coupled with the large rotational constant of OH is shown to render the results of the calculation very sensitive to the rotational distribution, or the rotational temperature if one exists, of this molecule. The calculations are carried out in the first and second orders of perturbation theory with the latter shown to give ET probabilities that are an order of magnitude larger than the former. The reasons for the difference in magnitude and temperature dependence of the first- and second-order calculations are discussed. The results of the calculations are compared with room temperature measurements as well as with an earlier calculation. Our calculated results are in good agreement with the room temperature measurements for the transfer of vibrational energy for the exothermic OH(nu=9) ET process but are about an order lower than the room temperature measurements for the exothermic OH(nu=8) ET process. The cause of this discrepancy is explored. This calculation does not give the large values of the rate coefficients needed by the model that explains the enhanced 4.3 microm emission from CO(2) in the nocturnal mesosphere.     

Ionic liquid enhanced magnesium-based polymer electrolytes for electrical double-layer capacitors

This paper describes the preparation and characterization of poly(vinyl alcohol) (PVA)-added ionic liquid-based ion conductors. The polymer electrolyte is incorporated with magnesium triflate [Mg(CF₃SO₃)₂ or MgTf] as salt and 1-butyl-3-methylimidazolium bromide (BmImBr) as ionic liquid. Differential scanning calorimetry (DSC) is carried out to investigate the glass transition temperature which is used to study the plasticizing effect of the ionic liquid. The highest conducting ionic liquid-based polymer electrolyte is used to fabricate electrical double-layer capacitors (EDLC). The electrochemical potential window is evaluated using linear sweep voltammetry (LSV). The electrochemical capacitance of the EDLC is evaluated through cyclic voltammetry (CV) and galvanostatic charge–discharge (GCD). The electrochemical potential window of ionic liquid-added polymer electrolyte is extended from 1.35 to 2.6 V. Cyclic voltammetry (CV) proves the improvement in specific capacitance of the electrical double-layer capacitors (EDLCs) containing ionic liquid-added polymer electrolyte.     

Influence of γ-ray-induced effects on dielectric dispersion of CuO-doped calcium fluoroborophosphate glass system

γ-Ray-induced dielectric dispersion in CaF₂–B₂O₃–P₂O₅ glasses doped with different concentrations of CuO was investigated. The glass samples were exposed to γ-rays with dose varying within the range 0–10 kGy. The dielectric dispersion and spectroscopic properties were measured before and after γ-ray treatment. Additionally, thermoluminescence studies were performed on post-irradiated glass samples. The results of dielectric properties and dielectric breakdown strength indicated a substantial increase in the insulating strength of CuO containing glasses due to γ-ray irradiation. The analysis of these results together with UV-vis optical absorption, IR spectra, and thermoluminescence studies have indicated a gradual increase in the concentration of mono-valent copper ions due to γ-ray treatment of the glass network. The additional studies have confirmed that these Cu⁺ ions occupy network-forming positions, increase the polymerization of the borophosphate glass network, and facilitates for the increase of insulating strength of the titled glass.     

Stereo‐ and Regioselective Synthesis of Tricyclic Spirolactones by Diastereoisomeric Differentiation of a Collective Key Precursor

A general, parallel, and collective synthesis of 5/5/5‐ and 5/5/6‐ring fusion topologies of tricyclic spiranoid lactones through the controlled cyclizations of easily accessible, common key precursors is described. The rapid composition of key cycloalkyl methylene precursors yielded an assembly of bicyclic diastereoisomeric iodolactones, which were individually converted into a wide range of tricyclic, angularly fused spiranoid lactones in a regioselective and stereodirected fashion through the diastereoisomeric differentiation of a collective key precursor. The critical stereochemical assignment of the bicyclic starting materials, as well as the tricyclic targets, was confirmed by X‐ray crystal structure determination.     

Synthesis of C3-dihydrofuran substituted coumarins via multicomponent approach

An efficient method was developed for the synthesis of dihydrofuran substituted coumarin from a one-pot, four-component reaction of 2-hydroxy aromatic aldehydes, 6-methyl, 4-hydroxy pyranone, aromatic aldehyde, and pyridinium ylide in the presence of tri-ethylamine under microwave irradiation. The reaction proceeds under solvent-free conditions to afford C3-dihydrofuran substituted coumarin in a diastereoselective manner in good yields (71–89%).     

One-pot multicomponent diastereoselective synthesis of novel dihydro-1H-furo[2,3-c]pyrazoles

An efficient method was developed for the diastereoselective synthesis of novel fused dihydro-1H-furo[2,3-c]pyrazole by a one-pot, four-component reaction of β-keto ester, hydrazine, aromatic aldehyde, and pyridinium ylide in the presence of triethylamine under microwave irradiation in solvent-free conditions in good yields. The merits of this cascade Knoevenagel condensation/Michael addition/cyclization sequence include its high atom economy, good yields, and efficiency of producing three new bonds (two C–C and one C–O) and two stereocenters in a single operation.     

Theoretical investigation on the kinetics and thermochemisty of H-atom abstraction reactions of 2-chloroethyl methyl ether (CH<Subscript>3</Subscript>OCH<Subscript>2</Subscript>CH<Subscript>2</Subscript>Cl) with OH radical at 298 K

Kinetics and thermochemistry of the H-atom abstraction reaction of CH₃OCH₂CH₂Cl with OH radical have been carried out using dual level of methods. Initially, geometry optimization and frequency calculations are performed at M06-2X/6-31+G(d, p) level of theory, and energetic calculations are further refined using CCSD(T)/6-311++G(d, p) level of theory in order to characterized all stationary points on potential energy surface (PES). The result shows that H-atom abstraction from –OCH₂ site of CH₃OCH₂CH₂Cl is dominant path. The rate constants are calculated using canonical transition state theory at 298 K, which are found to be in good agreement with the experimental data. We have presented the standard enthalpies of formation for CH₃OCH₂CH₂Cl and the radicals generated during the H-atom abstraction using group-balanced isodesmic reactions scheme. The atmospheric lifetime of title molecule is also calculated.     

Effect of Ni content on the diffusion-controlled growth of the product phases in the Cu(Ni)–Sn system

A strong influence of Ni content on the diffusion-controlled growth of the (Cu,Ni)₃Sn and (Cu,Ni)₆Sn₅ phases by coupling different Cu(Ni) alloys with Sn in the solid state is reported. The continuous increase in the thickness ratio of (Cu,Ni)₆Sn₅ to (Cu,Ni)₃Sn with the Ni content is explained by combined kinetic and thermodynamic arguments as follows: (i) The integrated interdiffusion coefficient does not change for the (Cu,Ni)₃Sn phase up to 2.5 at.% Ni and decreases drastically for 5 at.% Ni. On the other hand, there is a continuous increase in the integrated interdiffusion coefficient for (Cu,Ni)₆Sn₅ as a function of increasing Ni content. (ii) With the increase in Ni content, driving forces for the diffusion of components increase for both components in both phases but at different rates. However, the magnitude of these changes alone is not large enough to explain the high difference in the observed growth rate of the product phases because of Ni addition. (iv) Kirkendall marker experiments indicate that the Cu₆Sn₅ phase grows by diffusion of both Cu and Sn in the binary case. However, when Ni is added, the growth is by diffusion of Sn only. (v) Also, the observed grain refinement in the Cu₆Sn₅ phase with the addition of Ni suggests that the grain boundary diffusion of Sn may have an important role in the observed changes in the growth rate.     

Simple and one-pot protocol for synthesis of indene-spiro-oxindoles involving tandem Prins and Friedel-Crafts reactions

[reaction: see text] A simple and one-pot protocol for the synthesis of indene-spiro-oxindole derivatives via TiCl4-mediated reaction between 1,1-diarylethylenes and isatin derivatives involving construction of two carbon-carbon bonds through tandem Prins and intramolecular Friedel-Crafts (PFC) reactions has been described. A plausible mechanism for this transformation is also presented.     

FTIR studies of PVC/PMMA blend based polymer electrolytes

The polymer electrolytes composing of the blend of polyvinyl chloride-polymethyl methacrylate (PVC/PMMA) with lithium triflate (LiCF3SO3) as salt, ethylene carbonate (EC) and dibutyl phthalate (DBP) as plasticizers and silica (SiO2) as the composite filler were prepared. FTIR studies confirm the complexation between PVC/PMMA blends. The CCl stretching mode at 834 cm-1 for pure PVC is shifted to 847 cm-1 in PVC-PMMA-LiCF3SO3 system. This suggests that there is interaction between Cl in PVC with Li+ ion from LiCF3SO3. The band due to OCH3 at 1150 cm-1 for PVC-PMMA blend is shifted to 1168 cm-1 in PVC-PMMA-LiCF3SO3 system. This shift is expected to be due to the interaction between Li+ ion and the oxygen atom in PMMA. The symmetric vibration band and the asymmetric vibration band of LiCF3SO3 at 1033 and 1256 cm-1 shifted to 1075 and 1286 cm-1 in the DBP-EC plasticized PVC-PMMA-LiCF3SO3 complexes. The interaction between Li+ ions and SiO2 will lead to an increase in the number of free plasticizers (which does not interact with Li+ ions). When the silica content increases from 2% to 5%, the intensity of the peak at 896 cm-1 (due to the ring breathing vibration of free EC) increases in PVC-PMMA-LiCF3SO3-DBP-EC system.