Theoretical investigation of the Anti-Parkinson drug rasagiline and its salts: conformations and infrared spectra

The conformational analysis of rasagiline [N-propargyl-1(R)-aminoindan] was performed by the density functional theory (DFT) B3LYP method using the 6–31++G (d,p) basis set. A single point energy calculations based on the B3LYP optimized geometries were also performed at MP2/6-31++G (d, p) level. The vibrational frequencies of the most stable conformer of rasagiline was calculated at the B3LYP level and vibrational assignments were made for normal modes on the basis of scaled quantum mechanical force field (SQM) method. The influence of mesylate and ethanedisulfonate salts on the geometry of rasagiline free base and its normal modes are also discussed.      

In vivo biodistribution of <Superscript>131</Superscript>I labeled bleomycin (BLM) and isomers (A2 and B2) on experimental animal models

Bleomycins (BLMs; BLM, A2, and B2) were labeled with ¹³¹I and radiopharmaceutical potentials were investigated using animal models in this study. Quality control procedures were carried out using thin layer radiochromatography (TLRC), high performance liquid chromatography (HPLC), and liquid chromatography (LC/MS/MS). Labeling yields of radiolabeled BLMs were found to be 90, 68, and 71%, respectively. HPLC chromatograms were taken for BLM and cold iodinated BLM (¹²⁷I-BLM). Five peaks were detected for BLM and three peaks for ¹²⁷I-BLM in the HPLC studies. Two peaks belong to isomers of BLM. The isomers of BLM were purified with using HPLC. Biological activity of BLM was determined on male Albino Wistar rats by biodistribution and scintigraphic studies were performed for BLMs by using New Zelland rabbits. The biodistribution results of ¹³¹I-BLM showed high uptake in the stomach, the bladder, the prostate, the testicle, and the spinal cord in rats. Scintigraphic results on rabbits agrees with that of biodistributional studies on rats. The scintigraphy of radiolabeled isomers (¹³¹I-A2 and ¹³¹I-B2) are similiarly found with that of ¹³¹I-BLM.     

Synthesis, characterization and aggregation behaviour of novel peripherally tetra-substituted octacationic water soluble metal-free and metallophthalocyanines

In this study, a new phthalonitrile derivative 3 bearing 1,3-bis[3(dimethylamino)phenoxy]propan-2-ol 1, metal-free phthalocyanine (Pc) 4, metallophthalocyanines (MPcs) 5–7 and their quaternized derivatives 4a–7a were synthesized. Metal-free Pc 4 was prepared by cyclotetramerization of phthalonitrile derivate 3 and MPcs 5–7 were synthesized by heating 3 with NiCl₂, CoCl₂ and CuCl₂ in n-pentanol in the presence of 1,8-diazabicyclo[5.4.0]undec-7-ene, respectively. Quaternization of the dimethylamino functionality produced quaternized octacationic water soluble metal-free, Ni, Co and Cu Pcs which were soluble in water, DMF, DMSO. The aggregation behaviour of these compounds were investigated in different concentrations of chloroform for metal-free, Ni, Co and Cu Pcs. The effect of solvents on absorption spectra were studied in various organic solvents. The novel compounds were characterized using IR, ¹H-, ¹³C NMR, UV–vis and MS spectral data.     

2-Morpholinoethyl-substituted <Emphasis Type="Italic">N</Emphasis>-heterocyclic carbene (NHC) precursors and their silver(I)NHC complexes: synthesis,crystal structure and in vitro anticancer properties

In this study, a series of unsymmetrically 2-morpholinoethyl-substituted benzimidazolium salts and their Ag(I)NHC complexes were synthesized. The 1,3-dialkylbenzimidazolium salts (1a–d) were synthesized in dimethylformamide at 80 °C temperature from the N-(2-morpholinoethyl)benzimidazole and alkyl halides. The Ag(I)NHC complexes (2a–d) were synthesized in dichloromethane at room temperature from the benzimidazolium salts and Ag₂O. All compounds were characterized by spectroscopic techniques (NMR and FT-IR) and elemental analyses. Also, the salt 1c and complex 2c were characterized by single-crystal X-ray crystallography. Anticancer activities of 2-morpholinoethyl-substituted benzimidazolium salts and Ag(I)NHC complexes were investigated against the MCF-7 breast cancer cell line, and the IC₃₀ and IC₅₀ values of these compounds were found to be in the range of 241–490 and 6–14 µM, respectively.     

RNA-sensitive N-isopropylacrylamide/vinylphenylboronic acid random copolymer

Random copolymers of N-isopropylacrylamide (NIPA) and 4-vinylphenylboronic acid (VPBA) were obtained by solution polymerization using 2,2′-azobisizobutyronitrile as the initiator in ethanol at 65 °C. NIPA-co-VPBA copolymer exhibited both temperature- and pH-sensitivity. Thermally reversible phase transitions were observed both in the acidic and alkaline pH region for the copolymers produced with different VPBA/NIPA feed ratios. The pH dependency of the lower critical solution temperature (LCST) was stronger for the copolymers produced with higher VPBA feed concentrations. RNA was selected as a model biomolecule having vicinal-diol and amino groups that were potentially reactive with the boronic acid groups of NIPA-co-VPBA copolymer. The effect of RNA concentration on the LCST of NIPA-co-VPBA copolymer was investigated in aqueous media at different pHs. Although no significant effect was observed at pH 4, 7 or 10.5, the LCST decreased linearly with increasing RNA concentration at a pH approximately equal to the pK_a of boronic acid. This behavior was explained by considering the binding of RNA onto the copolymer chains to occur via two types of complex formation. For the formation of these complexes, the amino and vicinal-diol groups of RNA should react with the boronic acid groups of the copolymer in the tetrahedral anionic form. The results indicated that NIPA-co-VPBA copolymer could be utilized as a new reagent for the determination of RNA concentration in aqueous media. The proposed method was valid for the RNA concentration range of 0–4 g · mL⁻¹.

The schematical representation of the possible interactions between NIPA-co-VPBA copolymer and RNA. (A) A typical structure of single-stranded RNA. (B) Tetrahedral anionic form of boronic acid groups. (C) The interaction between the amino groups of the unpaired bases of RNA and the boronic acid groups of the copolymer. (D) Cyclic borate ester formation by the interaction between vicinal diol groups located at the 3′-end of RNA and boronic acid groups of the copolymer.     

Corrosion prevention of mild steel in acidic medium by 2-Pyrrolidin-1-yl-1,3-thiazole-5-carboxylic acid: Theoretical and experimental approach

The inhibition efficiency of 2-Pyrrolidin-1-yl-1,3-thiazole-5-carboxylic acid (PTCA) against mild steel (MS) corrosion was investigated in acidic solution by using quantum chemical calculations based on Density Functional Theory (DFT) method and electrochemical measurements. The electrochemical impedance spectroscopy (EIS), potentiodynamic, potential zero charge (pzc) analysis and electrochemical noise (EN) measurements at various concentrations (from 0.1 to 10 mM) and immersion times were utilized in experimental part. The surface analysis was achieved scanning electron microscope (SEM) and contact angle measurements in the absence and presence of 10 mM PTCA. According to DFT results, PTCA exhibited 3.737 eV band gap and 8.130 Debye dipole moment which were a signal of potentially convenient corrosion inhibitor properties. PTCA has a remarkable corrosion inhibition capability to mild steel, which inhibited both anodic and cathodic corrosion rates, relying on it's physically adsorption on the metal solution interface and protection ability was increased with increasing PTCA concentration. The obtained adsorption equilibrium constant was 11.11 × 10³ M^-1 and calculated standard free energy of adsorption was ?33.03 kJ mol^?1. The determined activation energy values were 55.58 kJ mol^?1 and 96.86 kJ mol^?1 in 0.5 M HCl in the absence and presence of 10 mM PTCA, respectively. PTCA demonstrated a strong inhibition efficiency of 98.3%, after 168 h immersion, according to the EIS results. As a consequently, we recommend that PTCA is a convenient inhibitor in 0.1 M HCl for mild steel protection against corrosion.     

Synthesis,spectroscopic (FT-IR and NMR), DFT and molecular docking studies of ethyl 1-(3-nitrophenyl)-5-phenyl-3-((4-(trifluoromethyl)phenyl)carbamoyl)-1H-pyrazole-4-carboxylate

Research on Chemical Intermediates - Trifluoromethyl group containing pyrazole-3-carboxamide derivative is synthesized and the structure of the molecule (E3N5PC) has been verified by using FT-IR,...     

Four-Step Spin Crossover in a New Cyano-Bridged Iron-Silver Coordination Polymer

Spin-crossover complexes with multistep transitions attract much attention due to their potential applications as multi-switches and for data storage. A four-step spin crossover is observed in the new iron(II)-based cyanometallic guest-free framework compound Fe(2-ethoxypyrazine)₂{Ag(CN)₂}₂ during the transition from the low-spin to the high-spin state. A reverse process occurs in three steps. Crystallographic studies reveal an associated stepwise evolution of the crystal structures. Multiple transitions in the reported complex originate from distinct Fe^II sites which exist due to the packing of the ligand with a bulky substituent.     

Development of a Diamond Nanoparticles-based Nanosensor for Detection and Determination of Antiviral Drug Favipiravir

This study developed a nanosensor for the detection and determination of favipiravir, a presumed drug that has potential therapeutic efficacy in treating COVID-19 patients, from tablets and serum samples. This nanosensor was obtained by adding the optimum amount of diamond nanoparticles into carbon paste. For the determination of favipiravir adsorptive stripping differential pulse (AdSDPV) and adsorptive stripping square wave voltammetry (AdSSWV) were used. Limit of detection values were found as 4.83×10⁻⁹ M and 2.44×10⁻⁷ M for bulk and 5.18×10⁻⁸ M and 4.38×10⁻⁸ M for serum samples using AdSDPV and AdSSWV, respectively. Recovery studies made of the tablet and serum produced satisfactory results.