Electronic Absorption Spectra of 2-Fluoro-4-bromo, 4-Fluoro-2-bromo and 2-Fluoro-5-bromo Toluenes

Abstract

Absorption spectra of 2-Fluoro-4-Bromo, 4-Fluoro-2-Bromo and 2-Fluoro-5-Bromo Toluenes have been investigated in the near ultraviolet region in vapour phase. The band systems correspond to allowed transitions with the most intense bands at 2742.09 Å (36458 cm^?1), 2745.96 Å (36406 cm^?1) and 2771.74 Å (36068 cm^?1) identified as 0,0 transitions in 2-Fluoro-4-Bromo, 4-Fluoro-2-Bromo and 2-Fluoro-5-Bromo Toluenes respectively. The bands in 4-Fluoro-2-Bromo Toluene have been analysed in terms of the ground state fundamental 208 cm^?1 and excited state fundamentals 244, 611, 855 and 1211 cm^?1 and the bands in 2-Fluoro-4-Bromo and 2-Fluoro-5-Bromo Toluenes are explained in terms of the upper state fundamentals 716, 987 and 1230 cm^?1 and 722, 886 and 2130 cm^?1 respectively.     

Improved analysis of dispersion compensation using differential time delay for high-speed long-span optical link

Abstract

A dispersion-compensation technique using differential time delay has been analyzed for a high bit rate dispersive limited system using higher order dispersion terms. The technique is based on splitting the power spectrum into upper and lower parts, corresponding to the two modulation sidebands, and delaying one of these with respect to the other. RMS, phase deviation, dimension free chirp parameter, and figure of merit have been evaluated due to higher order dispersion terms for ideal and realistic optical communication systems. It has been shown that the transmission distance could be enhanced to fourfold, sixfold, and eightfold when the compensation has been performed using second-, third-, and fourth-order dispersion (20D, 30D, and 40D) terms.     

Determining the feasibility of H2O2 production at a graphite cathode using bond dissociation energy: comparing simple and nitrogen doped cathodes

Research on Chemical Intermediates - Hydrogen peroxide (H2O2) is commercially produced by catalytic oxidation of anthrahydroquinone, which is energy-intensive. Electrochemical production of...     

New lignan glycosides from Cissus quadrangularis stems

Phytochemical investigation of Cissus quadrangularis stems led to the isolation of one new phenolic glycoside (1) and two new lignan glycosides (7 &; 8) along with twelve known compounds (2–6 &; 9–15). Their chemical structures were determined on the basis of extensive spectroscopic analysis using 1D, 2D NMR, and mass spectrometric analysis. Among the known compounds, 4–6, 9 and 12 were isolated for the first time from the genus Cissus whereas compounds 10, 11 and 13 for the first time from this plant.     

Optimization of the dimensions of an Yb(3+):ZBLANP optical fiber sample for laser cooling of solids

We propose a theoretical model for an optimized fiber structure for use in anti-Stokes laser cooling of solids. The sample is an optical fiber fabricated from a fluorozirconate glass ZBLANP with a core doped with Yb(3+) ions. The diameter of the fiber core is optimized to achieve the largest temperature change in the sample. It is shown that for each value of the pump power there is an optimized diameter of the fiber core, which permits the largest drop in the temperature of the sample.     

EPR Evidence for Premonitory Charge-Ordering Fluctuations in Nanomanganite Pr0.57Ca0.41Ba0.02MnO3

Electron paramagnetic resonance (EPR) and magnetic properties of nanocrystalline Pr_0.57Ca_0.41Ba_0.02MnO₃ are studied and compared with those of the bulk material. The nanoscale samples prepared by the sol–gel method were annealed at different temperatures to obtain particles of different sizes. The crystallite and particle sizes were estimated by X-ray diffraction and transmission electron microscopy and found to be approximately equal to 30, 60 and 100 nm. Magnetization studies on the 60 and 100 nm particles show charge-ordering at 230 K similar to the bulk sample prepared by solid-state reaction, while in the 30 nm particles the charge-ordering signature is absent. At low temperatures all the three nanosamples show ferromagnetic transitions. This result is confirmed by the EPR intensity behavior as well. However, the EPR line width, which is reflective of the spin dynamics, shows a shallow minimum for the 30 nm particles at the temperature of 230 K, corresponding to the charge-ordering transition. We interpret this result as an indication of the presence of charge-ordering fluctuations in the nanoparticles of 30 nm size even though the static charge order is absent, thus heralding the occurrence of charge order in the larger particles. Authors' address: Subray V. Bhat, Department of Physics, Indian Institute of Science, Bangalore 560012, India     

Nondestructive characterization of musical pillars of Mahamandapam of Vitthala Temple at Hampi, India

This paper presents the first scientific investigation on the musical pillars of the Vitthala Temple at Hampi, India. The solid stone columns in these pillars produce audible sound, when struck with a finger. Systematic investigations on the acoustic characteristics of the musical pillars of mahamandapam (great stage) of the Vitthala Temple have been carried out. The 11 most popular pillars that produce sounds of specific musical instruments are considered for the investigations. The sound produced from these 11 most popular musical pillars was recorded systematically and different nondestructive testing techniques such as low frequency ultrasonic testing, impact echo testing, and in situ metallography were employed on the musical columns of these pillars. The peak frequencies in the amplitude spectrum of the sound produced from various columns in these pillars are correlated with the dimensional measurements and ultrasonic velocity determined using impact echo technique. The peak frequencies obtained experimentally have been found to have excellent correlation with the calculated flexural frequencies based on the dimensional measurements and ultrasonic velocities of the columns.     

Fabrication of buried waveguides in planar silica films using a direct CW laser writing technique

A CW CO₂ laser ablation technique is used to form buried waveguides in planar silica films. It is shown that the refractive index of a silica thin film is reduced sufficiently adjacent to the laser processed region to allow the fabrication of low loss waveguides. The refractive index distribution of these structures is measured using the reflectance of a focussed spot from the surface of the films. The change in refractive index is measured to be of the order of the core cladding refractive index difference of typical single mode waveguides. The spatial resolution of the reflectance technique is 1.3 μm with a refractive index resolution of ±5 × 10^?4. Devices such as 1 × 2 and 1 × 4 multi-mode interference (MMI) splitters have also been demonstrated and shown to exhibit low transmission losses.     

Kinetics of oxidation of some disaccharides in ammoniacal medium

Kinetics of oxidation of lactose, maltose, cellobiose and melibiose has been studied by hexacyanoferrate(III) in the presence of ammonia. A general mechanism involving the formation of intermediate enodiol anion has been suggested. The effects of dielectric constant and salts have been studied in detail. The oxidation products have been characterised by descending paper chromatography. Compensation effects have been observed.