Di-μ-hydroxy-bis(N,N,N′,N′-tetramethylenediamine)-copper(II) chloride [Cu(OH)·TMEDA]2Cl2: an efficient, practical catalyst for benzylation and allylation of amides

An efficient protocol for the benzylation or allylation of amides using the corresponding benzyl or allyl chlorides as electrophiles under basic conditions with commercially available 5 mol % of [Cu(OH)TMEDA]₂Cl₂ as catalyst was developed. Under these conditions, unprotected amino acids were benzylated without any racemization.     

Rapid and simple liquid chromatography tandem mass spectrometry method for the quantification of zidovudine in rat plasma

A high-performance liquid chromatography/electrospray ionization tandem mass spectrometry method was developed and validated for the quantification of zidovudine in rat plasma. Following solid-phase extraction, the analytes were separated using an isocratic mobile phase on a reverse phase column and analyzed by MS/MS in the multiple reaction monitoring mode using the respective [M+H]+ ions, m/z 268/127 for zidovudine and m/z 230/112 for the internal standard. The method exhibited a linear dynamic range of 5-500 ng/mL for zidovudine in rat plasma. The lower limit of quantification was 5 ng/mL with a relative standard deviation of less than 8%. Acceptable precision and accuracy were obtained for concentrations over the standard curve range. A run time of 1.5 min for each sample made it possible to analyze more than 400 plasma samples per day. The validated method was applied for pharmacokinetic studies of the novel drug delivery systems of zidovudine in rats.     

Ultrafast dynamics and excited state deactivation of [Ru(bpy)2Sq]+ and its derivatives

Femtosecond transient absorption spectroscopy has been employed to understand the excited state dynamics of [Ru(bpy)(2)Sq](+) (I; bpy is 2,2'-bipyridyl, and Sq is the deprotonated species of the semiquinone form of 1,2-dihydroxy benzene) and its derivatives, a widely studied near-infrared (NIR) active electrochromic dye. Apart from the well-defined dpi(Ru) --> pi(bpy)-based metal-to-ligand charge transfer (MLCT) transition bands at approximately 480 nm, this class of molecules generally shows another dpi(Ru) --> pi(Sq)(SOMO)-based intense MLCT band at around 900 nm, which is known to be redox active and bleaches reversibly upon a change in the oxidation state of the coordinated dioxolene moiety. To have better insight into the photoinduced electron transfer dynamics associated with this MLCT transition, detailed investigations have been carried out on exciting this MLCT band at 800 nm. Immediately after photoexcitation, bleach at 900 nm has been observed, whose recovery is found to follow a triexponential function with major contribution from the ultrafast component. This ultrafast component of approximately 220 fs has been ascribed to the S(1) to S(0) internal conversion process. In addition to the bleach, we have detected two transient species absorbing at 730 and 1000 nm with a formation time approximately 220 fs for both species. The excited state lifetimes for these two transient species have been measured to be 1.5 and 11 ps and have been attributed to excited singlet ((1)MLCT) and triplet ((3)MLCT) states, respectively. Transient measurements carried out on the different but analogous derivatives (II and III) have also shown similar recovery dynamics except that the rate for the internal conversion process has increased with the decrease in the S(1) to S(0) energy gap. The observed results are consistent with the energy gap law for nonradiative decay from S(1) to S(0).     

Palladium complex in a room temperature ionic liquid: a convenient recyclable reagent for catalytic oxidation

Palladium (Pd)-catalyzed carbonylation of alcohols proceeds in ionic liquid (IL) media (1-ethyl-3-methylimidazolium hexafluorophosphate). Carbonylation of primary/secondary alcohols to aldehydes/ketones was greatly accelerated by the use of a Pd-based catalyst in the presence of NaOCl as an oxidant. The catalyst was more easier to recycle in the IL [Emim]PF₆ with an equal-proportioned CH₂Cl₂ than in the single CH₂Cl₂ or IL.     

Evolution of coercivity and its angular dependence in CoFe nanostructures subjected to field cooling

Evolution of coercivity and its angular dependence in CoFe nanostructures subjected to field cooling has been investigated in this work. Spherical CoFe grains with an average diameter of 30 nm were grown on a silicon substrate using electron beam evaporation. Further, the as‐deposited sample was subjected to field cooling. The morphology and topography of the sample before and after field cooling were characterized by atomic force microscopy and SEM. Magnetic force microscopy indicated that there is a good uniformity of magnetization throughout the sample after field cooling. Vibrating sample magnetometer measurements indicate that the coercivity in CoFe nanostructures is dependent on shape of the nanostructures. Copyright © 2013 John Wiley & Sons, Ltd.     

LC Method for the Determination of the Stability of Levetiracetam Drug Substance under Stressing Conditions

Levetiracetam is used in combination with other medications to treat certain types of seizures in people with epilepsy. Levetiracetam is in a class of medications called anticonvulsants and it works by decreasing abnormal excitement in the brain. A chromatographic separation was achieved on a YMC pack ODS AQ, 250 mm × 4.6 mm, 5 μm column using diluted phosphoric acid and acetonitrile in the ratio 85:15 v/v. Forced degradation studies were performed on the levetiracetam drug substance. The drug substance was degraded to Imp-B during acid and base hydrolysis. When the stress samples were assayed, the mass balance was matching. The sample solution and mobile phase was found to be stable up to 48 h at 25 °C. The developed method was validated with respect to linearity, accuracy, precision and robustness.     

Water treatment: functional nanomaterials and applications from adsorption to photodegradation

Global efforts for engineering desired materials which are able to treat the water sources still are ongoing in the bench level methods. Considering adsorbent and photocatalytic materials as the main reliable candidates still are encountering with struggles because of many challenges that restrict their large-scale application. This review comprehensively considered the recent advanced materials water treatment methods which involve to magnetic, activated carbon, carbon nanotubes (CNTs), graphene (G), graphene oxide (GO), (Graphene) quantum dots, carbon nanorods, carbon nano-onions, and reduced graphene oxide (RGO), zeolite, silica and clay-based nanomaterials. The adsorption and photocatalytic properties of these nanomaterials introduced them as highly potent option for heavy metal ions and organic dyes removal and photocatalytic degradation. High specific surface area in conjugation with presenting higher kinetics of adsorption and decomposition are the main characteristics of these materials which make them appropriate to treat wastewater even in ultralow concentration of the pollutants. Considering the mechanistic aspects of the adsorption and photocatalytic decomposition process, challenges and opportunities were other subjects that have been highlighted for the discussed nanomaterials. In term of the adsorption approaches, the mechanism of adsorptions and their influence on the maximum adsorption capacity were discussed and also for photocatalyst approach the radical active spices and their role in kinetic and efficiency of the organic pollutant decomposition were provided a deep discussion.     

Gels dried under supercritical and ambient conditions: a comparative study and their subsequent conversion to silica–carbon composite aerogels

In present work, we have prepared gels with various compositions of methyltrimethoxysilane—3-(2,3-epoxypropoxy) propyltrimethoxysilane (MTMS-GPTMS) using a two-step acid base sol–gel process. To make a comparative study between the two common drying routes, we prepared gels under supercritical and also under ambient conditions. The density of the supercritically dried hybrid aerogels lies between 0.18 and 0.31 gcm^?3, while the density of the ambient dried ones ranges between 0.35 and 0.42 gcm^?3. The surface area of MTMS-0.25 GPTMS aerogel dried under supercritical conditions, has been found to be 464 m² g^?1 with a pore volume and average pore diameter of 1.24 cm³ g^?1 and 11 nm respectively. The same composition dried under ambient conditions is found to have similar properties i.e. a BET surface area of 439 m² g^?1, pore volume of 1.22 cm³ g^?1 and average pore diameter of 11 nm. The aerogels were later pyrolyzed yielding silica/carbon composite aerogels. The pyrolized aerogels possessed a surface area as high as 207 m² g^?1 with a total pore volume of 0.98 cm³ g^?1. The pyrolysed aerogels were also calcined to yield carbon free materials.     

Assembling metal phosphonates in the presence of monodentate-terminal and bidentate-bridging pyridine ligands. Use of non-covalent and covalent-coordinate interactions to build polymeric metal-phosphonate architectures

The cubic transition metal phosphonates [(t)BuPO3M(2-apy)]4 (M= Zn (1), Co (2)), whose core resembles the D4R SBU of zeolites, have been synthesized from a reaction between the corresponding metal acetate, tert-butylphosphonic acid and 2-aminopyridine (2-apy) at room temperature. X-Ray structure determination reveals that the molecules of 1 and 2, which crystallize in the tetragonal I4(1)/a space group with crystallographically imposed 4 symmetry, form a 3-D supramolecular assembly aided by N-H...O hydrogen bonding. When the same reaction was carried out by using a bridging bidentate Lewis base such as 4,4'-bipyridine, insoluble precipitate is obtained for both zinc and cobalt. In the case of other metal salts such as copper, manganese and nickel, however, one-dimensional polymeric compounds such as [M((t)BuPO3H)2(4,4'-bipy)(H2O)2]n (M= Cu (3), Mn (4)), [(Ni(4,4'-bipy)(H2O)4)((t)BuPO3H)2(H2O)]n (5) have been isolated. The solid-state structures of 3-5 have been determined by single crystal X-ray diffraction studies. Compounds 3 and 4 are isostructural and crystallize in the triclinic P1 space group with two phosphonate ligands coordinated to the metal centers in a [1.100] fashion, whereas in the case of compound 5, the polymeric backbone is formed by Ni-4,4'-bipy units and the phosphonate anions show no bonding interaction to the metal. The 1-D polymeric chains of 3-5 organize in the solid-state as 3-D supramolecular assemblies with the aid of extensive hydrogen bonding interaction between coordinated water molecules and P-OH or P=O groups of the phosphonate ligands.