Crystal structure and fluorescent properties of a 2D cadmium coordination polymer

A new 2D cadmium(II) coordination polymer {[Cd(MBD)(L)]·(H₂O)₂} _n (1) (H₂MBD = 5-methoxycarbonyl-benzene-1,3-dicarboxylic acid, L = 1,3-bis(benzimidazol-l-yl)-2-propanol) is synthesized, in which the starting linker (benzene-1,3,5-tricarboxylic acid) undergoes selective monoesterification during the synthesis. In the structure of complex 1, each cadmium center is octahedrally coordinated by four O atoms from three carboxylate groups and two N of distinct L ligands. A detailed structural analysis reveales that compound 1 exhibits a unique 2D binodal (3,5)-connected (4².6⁷.8)(4².6) topology structure. Furthermore, the 2D layer is extended into a 3D network through π-π stacking interactions. The solid-state fluorescence properties of 1 are investigated at room temperature.     

Direct chlorine determination in crude oils by energy dispersive X-ray fluorescence spectrometry: An improved method based on a proper strategy for sample homogenization and calibration with inorganic standards

Official guidelines to perform chlorine determination in crude oil are (i) American Society for Testing and Materials (ASTM) D6470, which is based on the extraction of water from the oil and subsequent determination of the chloride by potentiometry, (ii) ASTM D3230, that measures the conductivity of a solution of crude oil in a mixture of organic solvents and (iii) US Environmental Protection Agency (EPA) 9075 that uses energy dispersive X-ray fluorescence spectrometry to quantify chlorine and it is applicable for the range from 200 μg g^− 1 to percent levels of the analyte. The goal of this work is to propose method to quantify lower amounts of chlorine in crude oil using energy dispersive X-ray fluorescence spectrometry using a simple calibration strategy. Sample homogenization procedure was carefully studied in order to enable accurate results. The calibration curve was made with standards prepared by diluting aqueous NaCl standard in glycerin. The method presented a linear response that covers the range from 8 to at least 100 μg g^− 1 of chlorine. Chlorine in crude oil samples from Campos Basin - Brazil were quantified by the proposed method and by potentiometry after extraction of chlorine from the oil. Results achieved using both methods were statistically the same at 95% confidence level.     

Influence of pH on the incorporation and growth of Pb<Subscript>2</Subscript>CrO<Subscript>5</Subscript> crystallites in silica matrix

Pb₂CrO₅ nanoparticles were embedded in an amorphous SiO₂ matrix by the sol–gel process. The pH and heat treatment effects were evaluated in terms of structural, microstructural and optical properties from Pb₂CrO₅/SiO₂ compounds. X-ray diffraction (XRD), high resolution transmission electron microscopy (HR-TEM), energy dispersive spectroscopy (EDS), and diffuse reflectance techniques were employed. Kubelka–Munk theory was used to calculate diffuse reflectance spectra that were compared to the experimental results. Finally, colorimetric coordinates of the Pb₂CrO₅/SiO₂ compounds were shown and discussed. In general, an acid pH initially dissolves Pb₂CrO₅ nanoparticles and following heat treatment at 600 °C crystallized into PbCrO₄ composition with grain size around 6 nm in SiO₂ matrix. No Pb₂CrO₅ solubilization was observed for basic pH. These nanoparticles were incorporated in silica matrix showing a variety of color ranging from yellow to orange.     

Synthesis of phosphates and phosphates-acetates hybrids of green tea polyphenol (−)-epigallocatechine-3-gallate (EGCG) and its G ring deoxy analogs as potential anticancer prodrugs

A series of phosphate or phosphate-acetate hybrid modified EGCG or EGCG G ring deoxy analogs were synthesized by a convenient semi-synthesis strategy from the abundant natural compound EGCG.     

Phase diagram, crystal chemistry and thermoelectric properties of compounds in the Ca-Co-Zn-O system

In the Ca-Co-Zn-O system, we have determined the tie-line relationships and the thermoelectric properties, solid solution limits, and structures of two low-dimensional cobaltite series, Ca₃(Co, Zn)₄O_9−z and Ca₃(Co,Zn)₂O_6−z at 885 °C in air. In Ca₃(Co,Zn)₄O_9−z, which has a misfit layered structure, Zn was found to substitute in the Co site to a limit of Ca₃(Co_3.8Zn_0.2)O_9−z. The compound Ca₃(Co,Zn)₂O_6−z (n=1 member of the homologous series, Ca_n+2(Co,Z_n)_n(Co,Zn)′O_3n+3−z) consists of one-dimensional parallel (Co,Zn)₂O₆⁶⁻ chains that are built from successive alternating face-sharing (Co,Zn)O₆ trigonal prisms and ‘n’ units of (Co,Zn)O₆ octahedra along the hexagonal c-axis. Zn substitutes in the Co site of Ca₃Co₂O₆ to a small amount of approximately Ca₃(Co_1.95Zn_0.05)O_6−z. In the ZnO-CoO_z system, Zn substitutes in the tetrahedral Co site of Co₃O₄ to the maximum amount of (Co_2.49Zn_0.51)O_4−z and Co substitutes in the Zn site of ZnO to (Zn_0.94Co_0.06)O. The crystal structures of (Co_2.7Zn_0.3)O_4−z, (Zn_0.94Co_0.06)O, and Ca₃(Co_1.95 Zn_0.05)O_6−z are described. Despite the Ca₃(Co, Zn)₂O_6−z series having reasonably high Seebeck coefficients and relatively low thermal conductivity, the electrical resistivity values of its members are too high to achieve high figure of merit, ZT.     

Searching for gallium bioactive compounds: Gallium(III) complexes of tridentate salicylaldehyde semicarbazone derivatives

In the search for gallium bioactive compounds five Ga(III) complexes, [Ga^III(L-H)₂](NO₃), with tridentate salicylaldehyde semicarbazone derivatives as ligands (L) have been synthesized and characterized in the solid state and in solution by different techniques. The crystal structure of [Ga^III(L4-H)₂](NO₃)·2H₂O, where L4 is 3-ethoxysalicylaldehyde semicarbazone, was solved by X-ray diffraction methods. The gallium(III) ion is in a distorted octahedral environment, coordinated to two nearly planar and mutually perpendicular 3-ethoxysalicylaldehyde semicarbazonato anions acting as tridentate ligands through their phenol and carbonyl oxygen atoms and their azomethine nitrogen atom. Their biological potential has been explored by evaluating their activity on Mycobacterium tuberculosis, causative agent of tuberculosis, and their cytotoxicity on tumor cell lines. Three different human tumor cell lines were selected that show different degrees of resistance to metallodrugs: ovarian A2780 (low resistance), breast MCF7 (medium resistance) and prostate PC3 (high resistance) cells. Although the complexes have not shown activity on M. tuberculosis, complexation with gallium has led to the enhancement of the cytotoxic potencies of the organic compounds. Those complexes that contain a bromide substituent at the phenolate ring have shown the highest cytotoxicities. In particular, [Ga^III(L2-H)₂](NO₃), where L2 is 5-bromosalicylaldehyde semicarbazone,·has shown a remarkable cytotoxicity on A2780 tumor cell line with an IC₅₀ value of the same order than cisplatin (IC_{50 Ga-L2} = 2.4 ± 0.3 μM; IC_{50 cisplatin} = 2.0 ± 0.1 μM, 72 h incubation at 37 °C). Interestingly, this complex has also shown moderate cytotoxicity against MCF7 and PC3 cells (IC_{50 MCF7} = 30 ± 6; IC_{50 PC3} = 18 ± 3 μM). Therefore, this gallium compound could be considered a promising wide spectrum potential anti-tumor agent.     

Photoswitchable nanoprobes offer unlimited brightness in frequency-domain imaging

A single probe has limited brightness in time-domain imaging and such limitation frequently renders individual molecules undetectable in the presence of interference or complex cellular structures. However, a single photoswitchable probe produces a signal, which can be separated from interference or noise using photoswitching-enabled Fourier transformation (PFT). As a result, the light-modulated probes can be made super bright in the frequency domain simply by acquiring more cycles in the time domain.     

Simultaneous sample washing and concentration using a "trapping-and-releasing" mechanism of magnetic beads on a microfluidic chip

Simultaneous washing and concentration of functionalized magnetic beads in a complex sample solution were demonstrated by applying a rotational magnetic actuation system to a microfluidic chip under continuous flow conditions. The rotation of periodically arranged small permanent magnets close to the fluidic channel carrying a magnetic bead suspension allows trapping and releasing of the beads along the fluidic channel in a periodical manner. Each trapping and releasing event resembles one washing cycle. A purification efficiency of magnetic beads out of a mixed magnetic and non-magnetic bead sample solution of 83±4% at a flow rate of 0.5 μL min(-1), and a magnetic bead recovery or concentration efficiency of 91±5% were achieved using a flow rate of 0.2 μL min(-1). The detection performance of the device was experimentally evaluated with two different bioassays, using either streptavidin-coated magnetic beads in combination with biotinylated fluorescent isothiocyanate (FITC), or a mouse antigen (Ag)-antibody (Ab) system.     

Multicolor, one- and two-photon imaging of enzymatic activities in live cells with fluorescently Quenched Activity-Based Probes (qABPs)

Fluorescence imaging provides an indispensable way to locate and monitor biological targets within complex and dynamic intracellular environments. Of the various imaging agents currently available, small molecule-based probes provide a powerful tool for live cell imaging, primarily due to their desirable properties, including cell permeability (as a result of their smaller sizes), chemical tractability (e.g., different molecular structures/designs can be installed), and amenability to imaging a wide variety of biological events. With a few exceptions, most existing small molecule probes are however not suitable for in vivo bioimaging experiments in which high-resolution studies of enzyme activity and localization are necessary. In this article, we reported a new class of fluorescently Quenched Activity-Based Probes (qABPs) which are highly modular, and can sensitively image (through multiple enzyme turnovers leading to fluorescence signal amplification) different types of enzyme activities in live mammalian cells with good spatial and temporal resolution. We have also incorporated two-photon dyes into our modular probe design, enabling for the first time activity-based, fluorogenic two-photon imaging of enzyme activities. This, hence, expands the repertoire of 'smart', responsive probes currently available for live cell bioimaging experiments.     

Molecule-substrate interaction channels of metal-phthalocyanines on graphene on Ni(111) surface

Molecule-substrate interaction channels of metal-phthalocyanines (MPcs, including NiPc, CuPc, ZnPc, FePc, and CoPc) on graphene on Ni(111) were investigated by employing high-resolution electron energy loss spectroscopy (HREELS). Except the expected IR-active modes, some Raman-active modes were also observed in all of MPcs, which are considered in this study. From the origination of the Raman-active features, it was deduced that MPcs are coupled with the substrate mainly through their central metal atom. The Raman-active modes appear as symmetric peaks in the HREELS in the case of MPcs with Ni, Cu, and Zn, whereas they are asymmetric and appear as a Fano line shape in the case of MPcs with Fe and Co. This spectroscopic difference indicates that the molecule-substrate coupling is completely different in the two cases mentioned above. The molecule-substrate interaction strength is considerably weak and comparable with the π-π interaction between molecules in the case of MPcs with Ni, Cu, and Zn, whereas it is much stronger in the case of MPcs with Fe and Co. From the HREELS observations, it can be suggested that the whole molecule can be effectively decoupled from the underneath Ni(111) by inserting a single layer of graphene between them in the case of MPcs with Ni, Cu, and Zn, whereas only benzene rings can be completely decoupled in the case of MPcs with Fe and Co.