Syntheses of β- and γ-fluorophenyl cis- and trans-α-methylene-γ-butyrolactones

Preparation of a series of cis-γ-fluorophenyl-β-phenyl-α-methylene-γ-butyrolactones is reported via ‘allylboration’ of fluorobenzaldehydes with (E)-methyl 3-phenyl-2-((4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)methyl)acrylate. The corresponding trans-γ-fluorophenyl lactones were prepared either (i) via ‘allylboration’ using the (Z)-reagents or (ii) via an indium triflate-mediated isomerization of the cis-products. The difficulty in isomerizing difluorinated cis-products confirms the probable intermediacy of carbocations. Finally, the synthesis of cis-β-fluorophenyl-γ-phenyl-α-methylene-γ-butyrolactones was achieved via an indium-catalyzed allylation–lactonization of aldehydes with (Z)-2-(bromomethyl)-3-(fluorophenyl)acrylates.     

In Vitro and In Silico Screening and Characterization of Antimicrobial Napin Bioactive Protein in Brassica juncea and Moringa oleifera

The study aimed to investigate the antibacterial activity of Mustard (Brassica juncea) and Moringa (Moringa oleifera) leaf extracts and coagulant protein for their potential application in water treatment. Bacterial cell aggregation and growth kinetics studies were employed for thirteen bacterial strains with different concentrations of leaf extracts and coagulant protein. Moringa oleifera leaf extract (MOS) and coagulant protein showed cell aggregation against ten bacterial strains, whereas leaf extract alone showed growth inhibition of five bacterial strains for up to 6 h and five bacterial strains for up to 3 h. Brassica juncea leaf extract (BJS) showed growth inhibition for up to 6 h, and three bacterial strains showed inhibition for up to 3 h. The highest inhibition concentration with 2.5 mg/mL was 19 mm, and furthermore, the minimum inhibitory concentration (MIC) (0.5 mg/mL) and MBC (1.5 mg/mL) were determined to have a higher antibacterial effect for <3 KDa peptides. Based on LCMS analysis, napin was identified in both MOS and BJS; furthermore, the mode of action of napin peptide was determined on lipoprotein X complex (LpxC) and four-chained structured binding protein of bacterial type II topoisomerase (4PLB). The docking analysis has exhibited moderate to potent inhibition with a range of dock score −912.9 Kcal/mol. Thus, it possesses antibacterial-coagulant potential bioactive peptides present in the Moringa oleifera purified protein (MOP) and Brassica juncea purified protein (BJP) that could act as an effective antimicrobial agent to replace currently available antibiotics. The result implies that MOP and Brassica juncea purified coagulant (BJP) proteins may perform a wide degree of antibacterial functions against different pathogens.     

Hepatoprotective Effect of β-Chitosan from Gladius of Sepioteuthis lessoniana Against Carbon Tetrachloride-Induced Oxidative Stress in Wistar Rats

Chitosan has attracted much attention as a biomedical material, owing to its unique biological activities. In this study, hepatoprotective effect of β-chitosan obtained from the gladius of squid Sepioteuthis lessoniana was studied against carbon tetrachloride (CCl₄)-induced oxidative stress and liver injury in rats. The rats that received β-chitosan along with the administration of CCl₄ showed significantly decreased plasma and tissue alanine aminotransferase (ALT) and aspartate aminotransferase (AST) activities and total cholesterol, triglyceride (TG) and free fatty acid (FFA) contents, whereas the treatment with β-chitosan alone markedly increased rat hepatic and circulatory superoxide dismutase (SOD), catalase and glutathione peroxidase (GPx) and reduced glutathione (GSH) levels and decreased the malondialdehyde level. Histopathological observations recommended the marked hepatoprotective effect of β-chitosan. The CCl₄-induced alterations on circulatory and hepatic antioxidant defence system were normalised by β-chitosan, and it could be concluded that the hepatoprotective effect of chitosan may be due to its antioxidant and antilipidemic property. Therefore, β-chitosan could be considered as antihepatotoxic agent.     

Recent Developments in Carbon-Based Nanocomposites for Fuel Cell Applications: A Review

Carbon-based nanocomposites have developed as the most promising and emerging materials in nanoscience and technology during the last several years. They are microscopic materials that range in size from 1 to 100 nanometers. They may be distinguished from bulk materials by their size, shape, increased surface-to-volume ratio, and unique physical and chemical characteristics. Carbon nanocomposite matrixes are often created by combining more than two distinct solid phase types. The nanocomposites that were constructed exhibit unique properties, such as significantly enhanced toughness, mechanical strength, and thermal/electrochemical conductivity. As a result of these advantages, nanocomposites have been used in a variety of applications, including catalysts, electrochemical sensors, biosensors, and energy storage devices, among others. This study focuses on the usage of several forms of carbon nanomaterials, such as carbon aerogels, carbon nanofibers, graphene, carbon nanotubes, and fullerenes, in the development of hydrogen fuel cells. These fuel cells have been successfully employed in numerous commercial sectors in recent years, notably in the car industry, due to their cost-effectiveness, eco-friendliness, and long-cyclic durability. Further; we discuss the principles, reaction mechanisms, and cyclic stability of the fuel cells and also new strategies and future challenges related to the development of viable fuel cells.     

Selective reductions. 56. Exploration of the B-haloisopinocampheylboranes for asymmetric reduction of ketones

A series of diisopinocampheylhaloboranes and monoisopinocampheyldihaloboranes were synthesized by the reaction of the corresponding boranes with the respective HX or X₂ (X = halogen) or by the hydroboration of α-pinene with the corresponding haloboranes. Stabilities of these haloboranes in various solvents were studied. Most of these haloboranes proved capable of reducing prochiral ketones to the alcohols with significant optical induction. When tested against a representative aromatic and aliphatic prochiral ketone, acetophenone and 3-methyl-2-butanone, respectively, α-phenethyl alcohol in 65–98% ee and 3-methyl-2-butanol in 28–59% ee were obtained. Some of them exhibited anomalous behavior.     

Characterisation of nicotine and related compounds using electrospray ionisation with ion trap mass spectrometry and with quadrupole time-of-flight mass spectrometry and their detection by liquid chromatography/electrospray ionisation mass spectrometry

Electrospray ionisation ion trap mass spectrometry (ESI-MS(n)) has been used to study the fragmentation patterns of nicotine and nine of its related compounds. From this study certain characteristic fragmentations are apparent with generally the pyrrolidine or piperidine ring being subject to chemical modifications. The structures of the product ions proposed for the ESI-MS(n) study have been supported by results from electrospray ionisation quadrupole time-of-flight mass spectrometry (ESI-QTOF-MS). Compounds with pyrrolidine and piperidine rings that possess an unsubstituted N atom have been shown to lose NH(3) at the MS(2) stage. Those compounds with N-methyl groups lose CH(3)NH(2) at the MS(2) stage. The loss of NH(3) or CH(3)NH(2) leaves the corresponding rings opened and this is followed by ring closure at the pyridine-2 carbon atom. Mono-N-oxides fragment in a similar way but the di-N-oxide can also fragment by cleavage of the bond between the pyridine and pyrrolidine rings. Cotinine also can undergo cleavage of this bond between the rings.This data therefore provides useful information on how substituents and the nature of the non-pyridine ring can affect the fragmentation patterns of nicotine and its related compounds. This information can be used in the characterisation of these compounds by liquid chromatography/electrospray ionization mass spectrometry (LC/ESI-MS) which results in the separation of nicotine and its related compounds with limits of detection (LODs) ranging from 15 to 105 ng/mL. The use of LC/ESI-MS to study nicotine-containing samples resulted in the simultaneous and unambiguous identification of seven of the compounds discussed in this paper: cotinine identified at retention time 12.5 min (with its [M+H](+) ion at m/z 177), nornicotine 16.0 min (m/z 149), anatabine 18.0 min (m/z 161), myosmine 18.5 min (m/z 147), anabasine 20.4 min (m/z 163), nicotine 22.2 min (m/z 163), and nicotyrine 31.4 min (m/z 159). For quality control of nicotine replacement therapy products, these nicotine impurities can be readily identified and determined at levels up to 0.3% for single impurities and up to 1.0% for total impurities.     

A class of deformational flow test cases for linear transport problems on the sphere

A class of new benchmark deformational flow test cases for the two-dimensional horizontal linear transport problems on the sphere is proposed. The scalar field follows complex trajectories and undergoes severe deformation during the simulation; however, the flow reverses its course at half-time and the scalar field returns to its initial position and shape. This process makes the exact solution available at the end of the simulation, and facilitates assessment of the accuracy of the underlying transport scheme. A procedure to eliminate possible cancellations of errors when the flow reverses is proposed.     

Angular momentum and cross sections for fusion with weakly bound nuclei: breakup,a coherent effect

Results for the cross section and average angular momentum for complete fusion at energies around the Coulomb barrier are presented for 7Li with 165Ho. Comparison of the cross sections with a one-dimensional barrier penetration model, using a potential consistent with the measured elastic scattering, showed a reduction above the barrier and an enhancement below it. An increase in the measured average angular momentum, , above the barrier and its consistency with that obtained from the fusion excitation function for weakly bound nuclei, is reported. These results together with a reanalysis of existing data conclusively demonstrate that the effect of breakup on fusion is coherent, like coupling to any nonelastic channel.     

Target asymmetry and effective neutron polarization with polarized deuteron targets

A careful discussion is given of the definitions of “target asymmetry” and “effective neutron polarization” in the reaction $\text{d}\text{(γ,π}{}^{\mathrm{?}}\text{)2}\text{p}$ with polarized deuterons. The connection between the analyzing powers, T_q^k of the reaction and the target asymmetry, T is established taking into account the method of preparation of the polarized target. It is further shown that the concept of effective neutron polarization P_eff is valid only in a very approximate way, even when the target deuteron is purely vector polarized.     

Fluorescence from doubly driven four-level atoms

The unusually narrow features in the fluorescence from ⁸⁵Rb driven by two laser fields L1 and L2, reported in [1], are explained on the basis of a four-level density matrix calculation. The L2 laser enables atom transfer to the fluorescing levels connected by the strong L1 laser. In turn the L1 laser causes the Autler-Townes splitting of the upper levels connected by L2 laser. These two effects are shown to maximise fluorescence within a narrow spectral range of the scanned L2 laser due to velocity selection of atoms from co-propagating and counter propagating L1 and L2 lasers. The analysis reveals the existence of narrow spectral features from a collection of atoms at room temperature even in the absence of induced coherences between the levels.Received: 2 July 2004, Published online: 21 September 2004PACS: 42.50.Hz Strong-field excitation of optical transitions in quantum systems; multiphoton processes; dynamic Stark shift - 32.80.Bx Level crossing and optical pumping