Effect of sodium metasilicate on natural flotability of coal

The effect of the quantity of sodium metasilicate and conditioning time in one set of experiments, and the effect of the solution concentration of sodium metasilicate, added at the same dosage and conditioning time to coal slurry, on flotability of a typical Indian coal in another set of experiments are studied. Two sets of 3² full factorial experiments are carried out to assess the effects of the aforementioned variables. The generated data are analyzed quantitatively and explained qualitatively. At 0.1% (w/v) solution concentration of solution added (0.02 g/kg) and 8 min conditioning time, sodium metasilicate acted as activator for kaolinite, whereas at 1.0% (w/v) solution concentration (0.2 g/kg), it acted as dispersant. The best observed condition of depressant is obtained at an added concentration of 10.0% (w/v, 0.2 g/kg) and 8 min conditioning time. The desired effect of the sodium metasilicate can be achieved by controlling its quantity, solution concentration added, and conditioning time.     

Analyses of carcinogenic aromatic amines released from harmful azo colorants by Streptomyces SP. SS07

Extracellular fluid protein (ECFP) of Streptomyces species SS07 has been used to reduce water soluble azo dyes and the carcinogenic amines released have been compared with that from chemical reduction. The effect of temperature, pH and contact time on the recovery of amines using ECFP was studied. The ECFP releases carcinogenic amines at a pH of 9.2 and a temperature of 37 degrees C for a contact period of 24 h. The reduction products were analyzed with HPLC and their structures confirmed by LC-MS and GC-MS. It was observed that both the ECFP and chemical reduction methods released similar type of amine products. In the case of dye samples, compared to chemical reduction, 5-20% increase in the release of carcinogenic amines by ECFP was observed. The percentage of amine products released by chemical reduction was higher for leather garment samples compared to ECFP treatment.     

Regioselective cyclization of unsymmetrical dicyanoanilines to novel 2,3-bifunctionalised indole regioisomers and their use in the synthesis of 4,5-dihydro[1,3]oxazino[5,4-b]indole-6-carbonitriles

Synthesis of novel-2,3-bifunctionalised indole regioisomers (2/3 and 6/7) from unsymmetrical dicyanoanilines 1 by regioselective cyclization in two independent ways. Regioisomers 6 are further utilized in synthesis of novel 4,5-dihydro[1,3]oxazino[5,4-b] indole-6-carbonitriles 9.     

Synthesis and Structure of Environmentally Relevant Perfluorinated Sulfonamides

Alkylated perfluorooctanesulfonamides are compounds of environmental concern. To make these compounds available for environmental and toxicological studies, a series of N-alkylated perfluorooctanesulfonamides and structurally related compounds were synthesized by reaction of the corresponding perfluoroalkanesulfonyl fluoride with a suitable primary or secondary amine. Perfluoroalkanesulfonamidoethanols were obtained from the N-alkyl perfluoroalkanesulfonamides either by direct alkylation with bromoethanol or alkylation with acetic acid 2-bromo-ethyl ester followed by hydrolysis of the acetate. N-Alkyl perfluorooctanesulfonamidoacetates were synthesized in an analogous way by alkylation of N-alkyl perfluoroalkanesulfonamides with a bromo acetic acid ester, followed by basic ester hydrolysis. Alternatively, N-alkyl perfluoroalkanesulfonamides can be alkylated with an appropriate alcohol using the Mitsunobu reaction. Perfluorooctanesulfonamide was synthesized from the perfluorooctanesulfonyl fluoride via the azide by reduction with Zn/HCl. All perfluorooctanesulfonamides contained linear as well as branched C₈F₁₇ isomers, typically in a 10:1 to 30:1 ratio. The crystal structures of N-ethyl and N,N-diethyl perfluorooctanesulfonamide show that the S-N bond has considerable double bond character. This double bond character results in a significant rotational barrier around the S-N bond (ΔG^≠ = 62-71 kJ mol⁻¹) and a preferred solid state and solution conformation in which the N-alkyl groups are oriented opposite to the perfluorooctyl group to minimize steric crowding around the S-N bond.     

Stability of AQUO-organic silver iodide sol

Summary The coagulation concentration for silver iodide sol, both in presence of pyridine and dioxane, increases for mono- and bivalent coagulating electrolyte. In presence of a mixture of pyridine and dioxane in equal volume, the coagulation concentration assumes an intermediate value, which is nearer to dioxane. However, in presence of dioxane more bivalent electrolyte is needed than in presence of pyridine. If a bivalent coagulating electrolyte is added to a sol containing a mixture of pyridine and dioxane, the amount of electrolyte required to coagulate is less than pyridine and greater than dioxane. Thus silver iodide sol is more stable toward mono- and bivalent coagulating electrolytes. The degree of stabilization increases with the decrease of the dielectric constant of the dispersing medium. The intermediate values for dioxane pyridine mixture is accountable by the fact that dioxane acts as a solvent for pyridine. The PH value of the sol increases up to the coagulation point. Beyond this, there is an abrupt decrease. When the particles settle down completely a rise in PH is again noted on the further addition of electrolytes. The increase in the electrical conductance is more significant after coagulation. These changes have been explained by adsorption of the ions and due to the release of ions from the electrical double layer.

---

Zusammenfassung Die Koagulationskonzentration für Silberjodidsol in Gegenwart von Pyridin und Dioxan steigt für ein- und zweiwertige Elektrolyte an. In Gegenwart einer Mischung zu gleichen Volumen erh?lt man mittlere Werte, n?her denen zu Dioxan. Für Koagulation in Gegenwart von Dioxan ist jedoch mehr zweiwertiger Elektrolyt notwendig als in Gegenwart von Pyridin. Bei Koagulation mit zweiwertigem Elektrolyt verbraucht ein Sol mit der Mischung von Pyridin und Dioxan weniger als für Pyridin und mehr als für Dioxan. Daher ist das Silbersol gegenüber ein- und zweiwertigen Elektrolyten stabiler. Der Grad der Stabilisierung w?chst mit abnehmender Dielektrizit?tskonstante des Dispersionsmediums. Die Zwischenwerte der Dioxan-Pyridin-Mischungen lassen sich verstehen durch die Tatsache, da? Dioxan als L?sungsmittel für Pyridin wirkt. Der PH-Wert des Sols w?chst bis zum Koagulationspunkt, darüberhinaus erfolgt ein steiler Abfall. Wenn die Teilchen vollst?ndig absetzen, ist bei weiterer Zugabe von Elektrolyt ein erneuter Anstieg im PH feststellbar. Der Anstieg der elektrolytischen Leitf?higkeit wird nach der Koagulation ausgepr?gter. Diese ?nderungen lassen sich durch Ionenadsorption und Freiwerden von Ionen aus der elektrischen Doppelschicht erkl?ren.

---

---

Our thanks are due to Prof. R. C. Mehrotra for providing all the facilities for this work and to Prof. S. Ghosh of Allahabad University for helpful discussions. Thanks are also due to the University Grants Commission, Government of India, for the award of a research scholarship to one of us (V. K. S.).     

Synthesis and biological evaluation of 3-amino-propan-1-ol based poly(ether imine) dendrimers

A general synthetic strategy for the rapid construction of poly(ether imine) dendrons and dendrimers with a nitrogen core, originating from 3-amino-propan-1-ol, is described. A new trifunctional monomer, namely, 3-[bis-(3-hydroxypropyl)amino]propan-1-ol, was used in a divergent synthesis of dendrimers up to the third generation. This method permitted installation of, either alcohol, amine, nitrile, ester or carboxylic acid groups at the peripheries the dendrimers. Cytotoxicity studies on water-soluble carboxylic acid terminated dendrimers were conducted and these studies revealed that poly(ether imine) dendrimers were non-toxic. These results illustrate that poly(ether imine) dendrimers are useful for biological studies.     

β-Cyclodextrin-polyurethane polymer as solid phase extraction material for the analysis of carcinogenic aromatic amines

β-Cyclodextrin-polyurethane (β-CDPU) polymer was synthesized by the reaction of β-cyclodextrin with hexamethylene diisocyanate in dry dimethylformamide and used as a sorbent for the solid phase extraction (SPE) of carcinogenic aromatic amines from water. The polymers were characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, differential scanning calorimetry and particle size analysis. The separation and quantification was performed by Liquid chromatography with RP-C₁₈ column and diode array detection using standard arylamines for quantification. When compared with commercially available sorbents, β-CDPU gave better recovery for the aromatic amines. From the variation of pH of the extractant from 4.0 to 8.5 recovery was highest at pH 8.5. The breakthrough volume has been ascertained to be 100 ml for 200 mg of the resin. The new SPE material offers better recovery and estimation of banned arylamines.     

Preconcentration of trace metals on Amberlite XAD-4 resin coated with dithiocarbamates and determination by inductively coupled plasma-atomic emission spectrometry in saline matrices

Preconcentration of Cd(II), Cu(II), Mn(II), Ni(II), Pb(II) and Zn(II) in saline matrices on Amberlite XAD-4 resins coated with ammonium pyrrolidine dithiocarbamate (APDC) and piperidine dithiocarbamate (pipDTC) and subsequent determination by inductively coupled plasma atomic emission spectrometry were studied. Parameters such as effect of pH, effect of HNO(3) concentration on elution of metals from resin were studied. The results show that Amberlite XAD-4 coated with APDC was more efficient in the recovery of metal ions compared with Amberlite XAD-4 coated with pipDTC, in the concentration range of 0.1-200 mug l(-1), for 1 g of Amberlite XAD-4 coated resin. The detection limits for Cd(II), Cu(II), Mn(II), Ni(II), Pb(II), Zn(II) are 0.1, 0.4, 0.3, 0.4, 0.6, 0.5 mug l(-1), respectively, for resin coated with APDC and 0.7, 1.0, 0.8, 0.9, 1.7 and 1.2 mug l(-1) for resin coated with pipDTC. The effect of diverse ions on the determination of aforesaid metals was studied. The method was applied for the determination of trace metal ions in artificial sea water and natural water samples. The results were compared with extraction AAS method.     

Synthesis of New 2,4‐Diaryl‐6‐methyl‐5‐nitropyrimidines as Antibacterial and Antioxidant Agents

A new series of 2,4‐diaryl‐6‐methyl‐5‐nitropyrimidines ( 5a , 5b , 5c , 5d , 5e , 5f , 5g , 5h , 5i ) were synthesized in good yields by Suzuki–Miyaura coupling of 2,4‐dichloro‐6‐methyl‐5‐nitropyrimidine ( 3 ) with various aryl boronic esters ( 4a , 4b , 4c , 4d , 4e , 4f , 4g , 4h , 4i ) in the presence of 1,1′‐ bis(diphenylphosphino)ferrocene dichloropalladium(II) (Pd(dppf)₂Cl₂). Further, antibacterial and antioxidant properties were screened for the title compounds 5a , 5b , 5c , 5d , 5e , 5f , 5g , 5h , 5i . Most of the compounds possessed significant activity against Gram‐positive bacteria Staphylococcus aureus and Bacillus subtilis and Gram‐negative bacteria Escherichia coli and Klebsiella pneumoniae. The antioxidant activity of the title compounds showed significant antioxidant activity when compared with vitamin C.     

Efficient and Industrially Viable Synthesis of Donepezil

An efficient, economically viable process has been developed for large‐scale preparation of donepezil HCl (1), an anti‐Alzheimer's agent. The process involves the condensation of 5,6‐dimethoxy‐1‐indanone (3) and 1‐benzyl‐4‐piperidinecarboxaldehyde (4) in the presence of alkalimetal carbonates at elevated temperature to yield 1‐benzyl‐4‐[(5,6‐dimethoxy‐1‐indanone)‐2‐yidenyl] methyl piperidine (2), the key intermediate in the synthesis of donepezil. Hydrogenation of 2 yields donepezil.