Fabrication of highly ordered TiO2 nanotube arrays using an organic electrolyte

Anodization of titanium in a fluorinated dimethyl sulfoxide (DMSO) and ethanol mixture electrolyte is investigated. The prepared anodic film has a highly ordered nanotube-array surface architecture. Using a 20 V anodization potential (vs Pt) nanotube arrays having an inner diameter of 60 nm and 40 nm wall thickness are formed. The overall length of the nanotube arrays is controlled by the duration of the anodization, with nanotubes appearing only after approximately 48 h; a 72 h anodization results in a nanotube array approximately 2.3 mum in length. The photoelectrochemical response of the nanotube-array photoelectrodes is studied using a 1 M KOH solution under both UV and visible (AM 1.5) illumination. Enhanced photocurrent density is observed for samples obtained in the organic electrolyte, with an UV photoconversion efficiency of 10.7%.     

Pore assembled multilayers of charged polypeptides in microporous membranes for ion separation

In this study, highly permeable ion-selective membranes are prepared via immobilization of polyelectrolyte multilayer networks within the inner pore structure of a microporous (pore size = 0.2 microm) support. Electrostatic layer-by-layer assembly is achieved through alternate adsorption of cationic and anionic polyelectrolytes under convective flow conditions. To initiate pore assembly, the first layer consists of covalently bound charged polypeptides (poly(L-glutamic acid) (PLGA) or poly(L-lysine) (PLL)) establishing a charged support for subsequent adsorption. Nonstoichiometric immobilization of charged multilayers within a confined pore geometry leads to an enhanced volume density of ionizable groups in the membrane phase. This overall increase in the effective charge density allows for Donnan exclusion of ionic species (especially divalent co-ions) using microporous materials characterized by permeability values that exceed conventional membrane processes. Multilayer assemblies are fabricated using both PLGA/PLL and synthetic polyelectrolytes (poly(styrenesulfonate)/poly(allylamine)) in an attempt to compare the level of adsorption and separation properties of the resulting materials. The role of salt concentration in the carrier solvent on overall polyelectrolyte adsorption was examined to determine its effect on both solute (Cl-, SO4(2-), As(V)) and water transport. Constriction of the pore size induced by multilayer propagation was monitored through permeability measurements and dextran rejection studies at each stage of the deposition process.     

π‐Facial Selectivity in the Formation of Tricarbonylchromium(0) Complexes of Estra‐1, 3, 5(10), 6‐tetraenes

The preparation of two η⁶‐estra‐1, 3, 5(10), 6‐tetraene tricarbonylchromium complexes 4 and 6 are described. In both cases only one stereoisomer can be isolated, in contrast to other estrane‐tricarbonylchromium complexes, where complexations are non‐stereoselective. X‐ray crystal structural analysis of 4 discloses that only the more sterically hindered β‐facial isomer is formed. It is assumed that the 6, 7‐olefinic moiety exerts a directive influence on the complexation.     

Studies on some radical transfer reactions by entrapping the radicals as polymer endgroups. III. Reaction of ȮH radical with halide ions

The reactions of OH radical with Cl^?, Br^?, I^?, and F^? ions have been studied by entrapping the product radicals as polymer endgroup which have been detected and estimated by the sensitive dye partition technique. The rate constants of the reactions with Br^?, Cl^?, and F^? ions have been determined to be 1.51 × 10⁹, 1.32 × 10⁹, and 0.92 × 10⁹ L mol^?1 s^?1, respectively at 25°C and pH 1.00. Oxidation of I^? ions liberates I, which inhibits the polymerization and the reaction could not be followed by polymer endgroup analysis. The observed order of reactivity Br^? > Cl^? > F^? is in accordance with the electron affinities of the halide ions. The acidity of the reaction medium has a strong influence on the rate of reaction. With Br^? ions, the rate constant of the reaction falls from 1.51 × 10⁹ to 0.75 × 10⁹ L mol^?1 s^?1 at 25°C as the pH is raised from 1.0 to 2.8. The method is simple and accurate and can be applied to study very reactive radicals.     

Excess heat capacities and orientational order in systems containing hexadecane isomers of different molecular structure

Using the Picker flow microcalorimeter, excess heat capacities have been obtained at 25°C throughout the concentration range for 2,2-dimethylbutane,n-hexane, and cyclohexane each mixed with a series of hexadecane isomers of increasing degrees of orientational order, as determined by depolarized Rayleigh scattering. The isomers are 2,2,4,4,6,8,8-heptamethylnonane, 6-, 4-, and 2-methylpentadecane, andn-hexadecane. Thec _p ^E values are negative, increasing rapidly in magnitude with increase of orientational order, and are not predicted by the Prigogine—Flory theory which neglects order. Values ofc _p ^E are obtained at 10, 25, and 55°C for cyclohexane +6-, 4-, and 2-methylpentadecane which with other literature data lead to the temperature dependence of the thermodynamic excess functions for cyclohexane solutions of the five C₁₆ isomers. The excess enthalpy and entropy vary with the C₁₆ isomer and with temperature, but the corresponding variation of the excess free energy is small, indicating a high degree of enthalpy-entropy compensation. This is consistent with a rapid decrease with temperature of orientational order in the C₁₆ isomers.     

The spectrophotometry and solvent-extraction behaviour of iron(III), vanadium(IV and V) and titanium(IV) chelates of 1-(o-carboxyphenyl)-3-hydroxy-3-methyltriazene

l-(o-Carboxyphenyl)-3-hydroxy-3-methyltriazene is proposed as an excellent reagent for the spectrophotometric determination of iron(III) and titanium(IV), and also for the separation of titanium from a large quantity of iron as well as other cations and anions. Iron(III) forms an anionic violet 1:2 complex at pH 4.0–9.4, and a cationic green 1:1 complex at pH 1.5–2.0, with absorption maxima at 570 nm and 660 nm, respectively. The violet complex is quantitatively extracted in chloroform containing n-octylamine at pH 3.0–9.0. The green and the violet iron(III) complexes obey Beer's law, the respective optimal ranges being 8.9–35.8 and 3.9–11.2 p.p.m. The yellow titanium chelate extracted into chloroform (absorption maximum at 410 nm) between pH 1.0 and 3.5, can be re-extracted into concentrated sulphuric acid a violet colour being produced with absorption maximum at 530 nm. Beer's law is obeyed in the ranges 0.8–5.7 p.p.m. for the titanium complex in chloroform and 3.4–19.2 p.p.m. when extracted in concentrated sulphuric acid. Interferences from diverse ions are not severe. Procedures for the separation and determination of titanium in the presence of a large quantity of iron are given. The isolation of the iron(III) and vanadium(IV and V) complexes, and their properties, are described.     

Novel terpenoids from the West Indian sea whip Pseudopterogorgia elisabethae (Bayer). Elisapterosins A and B: rearranged diterpenes possessing an unprecedented cagelike framework

Four diterpenes and a nor-diterpenoid, all of which possess unusual carbocyclic skeletons, were isolated from the hexane solubles of the West Indian gorgonian Pseudopterogorgia elisabethae. The structures and relative configurations of novel metabolites elisabethin D (2), elisabethin D acetate (3), 3-epi-elisabanolide (5), elisapterosin A (6), and elisapterosin B (7) were elucidated by interpretation of overall spectral data, which included 2D NMR correlation methods, IR, UV, and accurate mass measurements (HREI-MS and HRFAB-MS), chemical reactions, and X-ray diffraction analyses. The tetracyclic carbon skeleton of the elisapterosins is undescribed and constitutes a new class of C(20) rearranged diterpenes. Elisapterosin B displays strong in vitro anti-tuberculosis activity.     

Heats of solution and neutralization ofLewis acids and bases in acetic anhydride

Heats solution of someLewis acids and bases in acetic anhydride have been determined and the following order of their relative strengths is proposed: SbCl₅>SO₃>SnCl₄>TiCl₄>AsCl₃ and piperidine> n-butylamine>potassium acetate>sodium acetate -picoline>quinoline. Heats neutralization of theseLewis acids and bases in acetic anhydride suggest that the major enthalpy change in these neutralization reactions is due to the combination of a proton and the (CH₂COOCOCH₃)-ion, resulting in the formation of acetic anhydride.

---

Lösungs- und Neutralisationswärmen von Lewis-Säuren und-Basen in Essigsäureanhydrid

Zusammenfassung Es wurden die Lösungswärmen einigerLewis-Säuren in Essigsäureanhydrid bestimmt und folgende Reihung nach ihrer relativen Stärke vorgeschlagen: SbCl₅>SO₃>SnCl₄>TiCl₄>AsCl₃ und Piperidin> n-Butylamin>KAc>NaAc-Picolin>Chinolin. Die Neutralisationswärmen dieserLewis-Säuren und-Basen legen nahe, daß der Hauptanteil daran auf die Reaktion eines Protons mit (CH₂–COOCOCH₃)-zurückzuführen ist.

     

Organic phase conversion of bulk (wurtzite) ZnO to nanophase (wurtzite and zinc blende) ZnO

We describe the all-organic phase conversion of bulk commercial ZnO in the wurtzite modification to sub-30 nm ZnO that we find to be partially in the zinc blende [, a=4.568(3) Å] modification. The conversion involves refluxing ZnO in 2,4-pentanedione (acetylacetone) at 413 K to form the zinc 2,4-pentanedionate, which is decomposed by heating at 573 K in an appropriate high-temperature solvent such as dibenzylether to form nanophase ZnO. This nanophase, partially zinc blende ZnO can also be obtained in a single step by heating commercial zinc 2,4-pentanedionate in refluxing dibenzylether. Thermodiffractometry suggests that the conversion of zinc blende ZnO to wurtzite ZnO commences near 650 K.     

Some compounds of iron(III) with bidentate bases

Summary The iron(III) compound, FeCl(OH)(MeCO₂) · MeCO₂H · 0.5 H₂O, (1), interacts with the sample bidentate ligand, 2,2-bipyridyl (bipy), to form an aduct, Fe₂Cl₂(OH)₂(MeCO₂)₂ · (bipy). By the loss of protons, anthranilic (anthH) and salicylic (salH₂) acids behave as uninegative charged ligands to give FeCl(anth)₂ · H₂O and FcCl(salH)₂ · H₂O, respectively. The former decomposes on heatingin vacuo to form Fe₂O(anth)₄ while the latter yields Fe₂O(sal)₂. Acetylacetone (acacH) and 8-hydroxyquinoline (quinH) give FeCl(acac)₂ and FeCl(quin)₂ · (quinH). The latter desolvates at 140°/10^–4 torr to form FeCl(quin)₂. l.r. spectra, thermal decomposition, molar conductance and magnetic susceptibility studies at room temperature have been used to characterize these compounds.