Isotope gas analysis of tritium-labelled organic compounds based on pyrolytical decomposition

Summary A procedure has been developed for the activity measurement of tritium-labelled organic compounds in the gas phase. The organic compounds are pyrolysed in hydrogen carrier gas at 1150° and the decomposition products are swept through a carbon packing in accordance with the principle of the oxygen determination developed byUnterzaucher andBürger. The radioactive gas mixture obtained from the sample is swept by the hydrogen carrier gas flowing continuously through the reactor into a proportional counter tube, after the addition of propanebutane counter gas. By closure of the counter tube at a suitable moment, the radioactive gas is quantitatively trapped in the counter tube. The activity is measured in the limited proportional region. No memory effect occurs. The preparation of the sample requires 12 minutes; the relative standard deviation of analysis is <0.5%.

---

Zusammenfassung Ein Verfahren zur Aktivitätsbestimmung bei tritium-markierten organischen Verbindungen in der Gasphase wurde ausgearbeitet. Die organischen Substanzen werden in Wasserstoff als Trägergas bei 1150° pyrolysiert. Die Zersetzungsprodukte werden wie bei der Sauerstoffbestimmung nachUnterzaucher bzw.Bürger über eine Kohleschicht geleitet. Das radioaktive Gas-gemisch aus der Probe gelangt mit dem kontinuierlich strömenden Trägergas in ein Proportionalzählrohr, nachdem Propan-Butan-Zählgas zugesetzt wurde. Man schließt das Zählrohr im richtigen Augenblick, um das radioaktive Gas quantitativ zu erfassen. Die Aktivität wird im Proportionalbereich gemessen. Ein Memory-Effekt tritt nicht auf. Die Vorbereitung der Probe beansprucht 12 Minuten. Die relative Standardabweichung ist kleiner als 0,5%.

     

Rapid determination of aliphatic amines in water samples by pressure-assisted monolithic octadecylsilica capillary electrochromatography-mass spectrometry

A pressure-assisted capillary chromatography-mass spectrometry method based on the use of a monolithic octadecylsilica (ODS) capillary is proposed for the determination of aliphatic amines. A 25 mM citric acid buffer containing 10% methanol is used as running electrolyte. Separation is achieved by simultaneously applying a capillary electrophoresis (CE) voltage of 13 kV and an overimposed pressure of 8 bar. The use of pressure is required to ensure stable electrospray conditions. Analysis times are reduced by using a capillary column consisting of a 30 cm long monolithic silica capillary column bound with ODS and a fused-silica capillary column also 30 cm long. The proposed method was successfully applied to the determination of low-molecular-weight aliphatic amines in tap and river water. The analysis of real samples requires cleanup and preconcentration, which can be performed automatically by inserting a minicolumn in the replenishment system of the commercial instrument.     

Analytical potential from ab initio calculations for the Fe+-H2O and Feo-H2O systems

Analytical intermolecular potentials for the Fe⁺?H₂O and Fe^o?H₂O systems have been determined from ab initio calculations. Interaction energies for a lot of points along the two potential energy surfaces were calculated using Huzinga's MINI ?2 basis set. The results obtained were fitted to an analytical function containing 11 adjustable parameters that we have already used with success for the Fe²⁺?H₂O system. The goodness of the generated intermolecular potentials is discussed.     

Novel electroanalytical techniques for pollution analysis

Summary Two new analytical techniques are described. The so-called injection technique operates on evaluating a dynamic concentration signal as a result of following the concentration change in a certain part of a flow-through channel after injecting a sample or reagent at a small volume into the current of an appropriate solution flowing at a constant rate.The second technique, the programmed coulometric titration technique, also uses the flow-through channel principle; that means this novel technique allows the more precise titrimetric way of analysis in flowing solutions. In the case of both techniques potentiometric and voltammetric detectors were involved. Several examples proved the multifold advantages of these techniques for environmental analysis.

---

Neue elektroanalytische Verfahren für die Umweltanalyse

Zusammenfassung Zwei neue Methoden werden beschrieben. Die sog. Injektionstechnik wertet ein dynamisches Konzentrationssignal aus, das sich aus der Änderung in einem Durchflußkanal ergibt, wenn Probe oder Reagens in kleinen Volumina in einen konstant fließenden Flüssigstrom injiziert werden. Das zweite Verfahren, die programmierte coulometrische Titration, erlaubt die Anwendung der genaueren titrimetrischen Technik auf fließende Lösungen. Bei beiden Methoden werden potentiometrische und voltammetrische Detektoren verwendet. Mehrere Beispiele zeigen die vielfachen Vorteile dieser Verfahren bei der Anwendung auf die Analyse von Umweltmaterial.

Presented at the 6th Annual Symposium on Recent Advances in the Analytical Chemistry of Pollutants, April 21–23, 1976; Vienna, Austria     

On-line sorbent extraction, preconcentration and determination of lead by atomic absorption spectrometry

A method for the quantitative preconcentration of lead based on an existing batch process was developed for implementation in a flow system including a flame AAS detector. Lead can be quantitatively preconcentrated as pyrrolidinedithiocarbamate or dithizonate on an activated carbon minicolumn. The chelates are eluted in methyl isobutyl ketone and introduced directly into the nebuliser-burner. An enrichment factor of 50 is typically obtained for a preconcentration time of 2 min (lead can be determined at concentrations between 15 and 400 ng/ml), which results in a throughput of ca. 25 samples per hr. The sensitivity achieved with the two reagents is similar, but the selectivity provided by APDC exceeds that of dithizone. Based on the results obtained in the determination of lead in reference materials (minerals and skim milk), the proposed APDC method is applicable to real samples.     

Polarographic determination of pilocarpine using the catalysed pre-wave of nickel(II)

On the basis of a detailed study of the pilocarpine-induced nickel(II) pre-wave using various polarographic techniques, an electrode process mechanism is proposed in which the formation of a catalytic complex between aquo-nickel(II) and veronalate-nickel(II) on the one hand and unprotonated pilocarpine adsorbed on the electrode surface on the other is followed by the reduction of nickel(II) in the complex and the release of the catalytic ligand. The pre-peak recorded by differential-pulse polarography in the system 1 × 10^?3 M Ni(II)-1 × 10^?2 M sodium veronal, nitric acid (pH 8.5) (with ionic strength maintained at 0.2 with sodium nitrate) can be used for quantitative determination of pilocarpine at concentrations in the range 2.5 × 10^?7-8 × 10^?6 M.     

Study of the microstructure of tetrahydrofuran-3,3 dimethyloxetane copolymers by 13C-NMR spectroscopy.

The microstructure of tetrahydrofuran (A)-3,3 dimethyloxetane (B) copolymers was studied by ¹³C-{¹H}-NMR spectroscopy. Only the methyl carbons corresponding to the 3,3 dimethyloxetane unit appear as a singlet, whereas the other carbons present a more complicated spectral pattern than it would be expected if ? effects were negligible. The assignment of the resonance signals allowed the determination of the values of the probabilities of the different triads, which were in good agreement with those obtained from the reactivity ratios.     

Influence de la temperature de polymerisation sur le taux de branchement de divers polybenzofurannes obtenus par amorçage cationique

Several polybenzofuranes, obtained by cationic initiation at various temperatures, have been fractionated by preparative G.P.C. The fractions have been studied by various physical methods, mainly osmometry, light scattering, viscometry and G.P.C. These determinations have been made in benzene and the Mark-Houwink relations have been obtained. From the differences observed between these various relations, the gyration radii and the determination of branching indexes, we have found very numerous branches in the samples obtained at the highest temperatures. These branches very probably result from a Friedel-Crafts attack on benzene rings by the carbocations of growing chains. Quantum chemistry determinations are in agreement with this view.     

Electroviscous Effect in Dilute Suspensions of Alumina

A study on the electroviscous effect of alumina suspensions has been made. At the low volume fraction of the particles studied here only a first-order effect was detected. Ubbelohde-type capillary viscometers have been used. A simple method to determine the hydrodynamic constant k(1) has been proposed. The experimental primary electroviscous coefficients corresponding to different electrolyte concentrations have been compared with two different theoretical approachs (I. G. Watterson, and L. R. White, J. Chem. Soc. Faraday Trans. 2 77, 1115 (1981); F. J. Rubio-Hernández, E. Ruiz-Reina, and A. I. Gómez-Merino, J. Colloid Interface Sci. 206, 334 (1998)) and the results suggest that the presence of a dynamic Stern layer plays a certain role in this effect. Copyright 2000 Academic Press.     

Acidity and activity of H-mordenite in m-xylene isomerization

The dependence of the activity of H-mordenites prepared from a natural mordenite on the nature and strength of the acid groups present was studied. The superior catalytic activity and stability of the H(Ag)–MOR zeolite compared with other H-forms is explained on the basis of NH₃ adsorption and IR measurements.

---

H-, . H(Ag)–MOP H- NH₃ .