Determination of copper, lead, cadmium, zinc, and iron in calcium fluoride and other fluoride-containing samples by means of direct solid sampling GF-AAS

Direct solid sampling graphite furnace AAS (SS-GF-AAS) provides an advantageous alternative to the conventional AAS which requires wet digestion of the samples. This method is suitable for trace element determination in calcium fluoride and other fluoride-containing samples. Matrix effects were studied by using calibration standards, certified reference materials with different matrices and by means of three-dimensional calibration. 3D calibration is suitable for selection of calibration samples for more reliable analyses. Cu, Pb, Cd, Zn, and Fe were determined by means of calibration with variation of sample weight using certified reference materials and suitable fluoride-containing calibration samples. Received: 25 July 1997 / Revised: 15 December 1997 / Accepted: 20 December 1997     

Flow-injection spectrofluorimetric determination of ethylenethiourea

A flow-injection configuration is proposed for the fluorimetric determination of ethylenethiourea. The procedure is based on the inhibitory effect of ethylenethiourea on the oxidation of thiamine to thiochrome by mercury(II). A linear calibration graph was obtained between 0.1 and 2.0 μg mL^–1, with a sampling rate of 40 samples per hour and a relative standard deviation of about 1.11%. The usefulness of the method was tested for the determination of ethylenethiourea residues in water, milk, potatoes, pear, grape and apple. Received: 26 January 1998 / Revised: 6 April 1998 / Accepted: 9 April 1998     

Complex study of nickel skeleton catalysts: V. Study of novel non-pyrophoric nickel skeleton catalysts by derivatograph

The structure and properties of non-pyrophoric skeleton catalysts prepared from NiSi, NiAlSi, NiMg and NiZn alloys have been studied—apart from other thermal methods—by means of the derivatograph.Our experimental results have contributed to the explanation of the non-pyrophoric behaviour of these catalysts. We demonstrated that the desorption of the hydrogen content in our catalysts is not accompanied by the oxidation of active nickel. This oxidation takes place only at higher temperatures, above 200°C, at a rate proportional to the amount of active nickel.Other constituents of the catalysts (adsorbed water, hydroxide content) were also determined from the experimental data. The outstandingly high Mg(OH)₂ content of the NiMg catalyst indicates that its structure is dissimilar: Mg(OH)₂ also acts as support for the catalyst.     

Isotope gas analysis of tritium-labelled organic compounds based on pyrolytical decomposition

Summary A procedure has been developed for the activity measurement of tritium-labelled organic compounds in the gas phase. The organic compounds are pyrolysed in hydrogen carrier gas at 1150° and the decomposition products are swept through a carbon packing in accordance with the principle of the oxygen determination developed byUnterzaucher andBürger. The radioactive gas mixture obtained from the sample is swept by the hydrogen carrier gas flowing continuously through the reactor into a proportional counter tube, after the addition of propanebutane counter gas. By closure of the counter tube at a suitable moment, the radioactive gas is quantitatively trapped in the counter tube. The activity is measured in the limited proportional region. No memory effect occurs. The preparation of the sample requires 12 minutes; the relative standard deviation of analysis is <0.5%.

---

Zusammenfassung Ein Verfahren zur Aktivitätsbestimmung bei tritium-markierten organischen Verbindungen in der Gasphase wurde ausgearbeitet. Die organischen Substanzen werden in Wasserstoff als Trägergas bei 1150° pyrolysiert. Die Zersetzungsprodukte werden wie bei der Sauerstoffbestimmung nachUnterzaucher bzw.Bürger über eine Kohleschicht geleitet. Das radioaktive Gas-gemisch aus der Probe gelangt mit dem kontinuierlich strömenden Trägergas in ein Proportionalzählrohr, nachdem Propan-Butan-Zählgas zugesetzt wurde. Man schließt das Zählrohr im richtigen Augenblick, um das radioaktive Gas quantitativ zu erfassen. Die Aktivität wird im Proportionalbereich gemessen. Ein Memory-Effekt tritt nicht auf. Die Vorbereitung der Probe beansprucht 12 Minuten. Die relative Standardabweichung ist kleiner als 0,5%.

     

The structure of the FeNO group in two metastable states (MS1 and MS2) of the nitroprusside anion in Na2[Fe(CN)5NO].2H2O. Infrared spectra and quantum chemistry calculations for the normal and the 15NO and N18O isotopic substituted substance

Low temperature infrared spectra of light induced metastable states MS1 and MS2 of the nitroprusside anion in Na(2)[Fe(CN)(5)NO].2H(2)O, isotopically normal and substituted with (15)NO and N(18)O, are presented and discussed. As a consequence of the relatively high population of the MS2 state achieved by further irradiation with 1064 nm light of samples previously irradiated with 488.0 nm light, new bands were seen for the first time, and others, previously reported, were confirmed. The comparison of the spectral data obtained for the FeNO moiety of the isotopically normal as well as of the (15)NO and N(18)O substituted anion with the results of quantum chemical (DFT) calculations support the assignment of the bands which appear after successive irradiations to MS1, the linear Fe(eta(1)-ON) linkage isomer, and to MS2, the side-bound Fe(eta(2)-NO) isomer.     

Syntheses and Characterizations of Novel One-dimensional Coordination Polymers Self-assembled from Co(NCS)_2 and Flexible Diester-bridged Pyridine-based Ligands

ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅｒｅｈａｓｂｅｅｎｒｅｃｅｎｔｒｅｓｅａｒｃｈｉｎｔｅｒｅｓｔｉｎｃｒｙｓｔａｌｅｎ ｇｉｎｅｅｒｉｎｇａｎｄｔｈｅｄｅｓｉｇｎｏｆｓｕｐｒａｍｏｌｅｃｕｌａｒａｒｃｈｉｔｅｃｔｕｒｅｓ .1Ｂｙｓｅｌｅｃｔｉｎｇｔｈｅｃｈｅｍｉｃａｌｓｔｒｕｃｔｕｒｅｏｆｌｉｇａｎｄｓａｎｄｔｈｅｃｏ ｏｒｄｉｎａｔｉｏｎｇｅｏｍｅｔｒｙｏｆｔｒａｎｓｉｔｉｏｎｍｅｔａｌｉｏｎｓ ,ｔｈｅｏｒｇａｎｉｃ/ｉｎｏｒｇａｎｉｃｈｙｂｒｉｄｍａｔｅｒｉａｌｓｍａｙｙｉｅｌｄａｓｅｒｉｅｓｏｆｎ…     

Minimal number of chromatographic test parameters for the characterisation of reversed-phase liquid chromatographic stationary phases

This paper focuses on the classification or differentiation of RP-HPLC columns based on measured chromatographic properties. A chemometric study has been conducted on a published data set consisting of 85 RP-HPLC columns and on a data set consisting of 47 self-tested columns. Principal component analysis enables determination of the number of parameters necessary for a rational differentiation. The results show that reducing the number of parameters for such differentiation still allows classification of the columns just as a higher number did. It is shown that three test parameters produce a classification similar to that obtained with five parameters.     

Studies on electroosmotic and electrophoretic behavior of cholesterol in aqueous solutions

Electrical properties of cholesterol interfaces have been investigated. For this purpose electroosmotic and hydrodynamic permeation of water, sodium chloride, barium chloride, aluminum chloride, and urea solutions across a cholesterol plug have been investigated. Dependence of electroosmotic permeability on concentration of electrolytes has also been studied. Electrophoretic mobility of cholesterol particles of known size distribution and dispersed in solutions of varying concentrations of electrolytes and urea has also been studied. The data have been used to estimate ζ potentials in order to have a plausible picture of the electrical double layer at the cholesterol/ solution interfaces.     

Effect of stabilizers in the thermal treatment of PVC—IX. An investigation of the loss of Ba and Cd stearates from their equimolar mixture during static thermal stress of PVC—IX

Thermal degradation at 180° in air of PVC stabilized with an equimolar mixture of Ba and Cd stearates has been studied. The “unreacted” stearates were separated by filtering tetrahydrofuran solutions of samples. The filtration and thermal degradation were examined by means of infrared spectroscopy in the range 1400–1800 cm^?1. It has been demonstrated that, during the thermal stress, CdCl₂ is accumulated in the sample and that the presence of Ba stearate supports only the consumption of Cd stearate.     

Trehalose-based cyclodextrin analogs: cyclotrehalans (CTs)

A new concept for the de novo synthesis of artificial glyconanocavities is presented. The use of alternating α,α′-trehalose building blocks and (thio)urea segments allows the efficient synthesis of a new family of cyclooligosaccharides, namely cyclotrehalans (CTs), featuring a convex-shaped cavity with an apolar environment. CTs are designed to exhibit molecular inclusion abilities similar to that of cyclodextrins (CDs). Contrary to CDs, CTs expose the monosaccharide β-face to the inner cavity, while the (thio)urea tethers provides some conformational adaptability. High-yielding syntheses of a series of CTs and a preliminary evaluation of their inclusion properties are reported.