Ma?analytische Bestimmung von Blei-Ion als unl?sliche Bleiverbindung unter Benutzung von Diphenylcarbazon als Indikator

Ohne Zusammenfassung     

Pulsed laser deposition of perovskite relaxor ferroelectric thin films

Structural, dielectric and ferroelectric properties of thin films of La-doped lead zirconate titanate (PLZT) and sodium bismuth titanate-barium titanate (NBT-BT) perovskite relaxor ferroelectric have been investigated. PLZT films were deposited on Pt/Si substrates in oxygen atmosphere by pulsed laser deposition (PLD) and radio frequency (RF) discharge-assisted PLD, using sintered targets with different La content and Zr/Ti ratio, near or at the boundary relaxor ferroelectric. The films are polycrystalline with perovskite cubic or slightly rhombohedral structure. A slim ferroelectric hysteresis loop, typical for relaxors, has been measured for all film sets. Dielectric characterization shows a large value of capacitance tunability and low dielectric loss. However, common problems related to lead diffusion into the metallic electrode layer do not allow one to obtain high capacitance values, due to the formation of an interface layer with low dielectric constant. Lead-free NBT-BT thin films have been deposited on single crystal (1 0 0)-MgO substrates starting from targets with composition at the morphotropic phase boundary between rhombohedral and tetragonal phase. Films deposited by PLD are polycrystalline perovskite with a slight (1 0 0) orientation. Capacitance measurements were performed using interdigital metallic electrodes deposited on the film's top surface and showed high relative dielectric constant, on the order of 1300.     

Fluorescence lifetime imaging in biosciences: technologies and applications

The biosciences require the development of methods that allow a non-invasive and rapid investigation of biological systems. In this aspect, high-end imaging techniques allow intravital microscopy in real-time, providing information on a molecular basis. Far-field fluorescence imaging techniques are some of the most adequate methods for such investigations. However, there are great differences between the common fluorescence imaging techniques, i.e., wide-field, confocal one-photon and two-photon microscopy, as far as their applicability in diverse bioscientific research areas is concerned. In the first part of this work, we briefly compare these techniques. Standard methods used in the biosciences, i.e., steady-state techniques based on the analysis of the total fluorescence signal originating from the sample, can successfully be employed in the study of cell, tissue and organ morphology as well as in monitoring the macroscopic tissue function. However, they are mostly inadequate for the quantitative investigation of the cellular function at the molecular level. The intrinsic disadvantages of steady-state techniques are countered by using time-resolved techniques. Among these fluorescence lifetime imaging (FLIM) is currently the most common. Different FLIM principles as well as applications of particular relevance for the biosciences, especially for fast intravital studies are discussed in this work.      

Combining unsupervised and supervised artificial neural networks to predictaquatic toxicity

Most quantitative structure-activity relationship (QSAR) models are linear relationships and significant for only a limited domain of compounds. Here we propose a data-driven approach with a flexible combination of unsupervised and supervised neural networks able to predict the toxicity of a large set of different chemicals while still respecting the QSAR postulates. Since QSAR is applicable only to similar compounds, which have similar biological and physicochemical properties, large numbers of compounds are clustered before building local models, and local models are ensembled to obtain the final result. The approach has been used to develop models to predict the fish toxicity of Pimephales promelas and Tetrahymena pyriformis, a protozoan.     

Clustering of catalytic nanocompartments for enhancing an extracellular non-native cascade reaction

Compartmentalization is fundamental in nature, where the spatial segregation of biochemical reactions within and between cells ensures optimal conditions for the regulation of cascade reactions. While the distance between compartments or their interaction are essential parameters supporting the efficiency of bio-reactions, so far they have not been exploited to regulate cascade reactions between bioinspired catalytic nanocompartments. Here, we generate individual catalytic nanocompartments (CNCs) by encapsulating within polymersomes or attaching to their surface enzymes involved in a cascade reaction and then, tether the polymersomes together into clusters. By conjugating complementary DNA strands to the polymersomes'' surface, DNA hybridization drove the clusterization process of enzyme-loaded polymersomes and controlled the distance between the respective catalytic nanocompartments. Owing to the close proximity of CNCs within clusters and the overall stability of the cluster architecture, the cascade reaction between spatially segregated enzymes was significantly more efficient than when the catalytic nanocompartments were not linked together by DNA duplexes. Additionally, residual DNA single strands that were not engaged in clustering, allowed for an interaction of the clusters with the cell surface as evidenced by A549 cells, where clusters decorating the surface endowed the cells with a non-native enzymatic cascade. The self-organization into clusters of catalytic nanocompartments confining different enzymes of a cascade reaction allows for a distance control of the reaction spaces which opens new avenues for highly efficient applications in domains such as catalysis or nanomedicine.

Compartmentalization is fundamental in nature, where the spatial segregation of biochemical reactions within and between cells ensures optimal conditions for the regulation of cascade reactions.     

Core–shell hybrid material for ZnO nanorods generation

The aim of our study consisted in obtaining ZnO nanorods using a photonic crystal (PC) structure as substrate. For obtaining of such structures, a PC presenting with electroconductive properties was chosen. Thus, the first step was represented by the synthesis of a copper nanoparticles shell composed by a maximum of seven layers of inorganic particle. This core–shell structure was subsequently used for the generation of ZnO nanorods by electrochemical deposition. The obtained materials were characterized by SEM, dynamic light scattering, UV–Vis, and X-ray powder diffraction analysis.     

Hybrid polymeric latexes containing magnetite

The work describes a study for preparing polystyrene (PSt) and polymethyl methacrylate (PMMA) latex, containing magnetite (Fe₃O₄), covalently bounded to the polymeric chains. The magnetite was functionalized with various alkoxysilanes containing double bonds: vinyltriethoxysilane (VTES), methacryloyl propyl trimethoxysilane (MPTS) and vinyldimethylethoxysilane (VMe₂TES). The ferrite-silane composite forms higher average size particles with MPTS than with VTES. Ferrite functionalized with VMe₂TES forms stable latexes with both PSt and PMMA polymers. PSt forms also stable latexes with ferrite functionalized with VTES but unstable with ferrite functionalized with MPTS.     

Occurrence of organochlorine pesticides and polychlorinated biphenyls in soils and sediments from Eastern Romania

Polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs), such as DDT and analogues, hexachlorocyclohexane (HCH) isomers and hexachlorobenzene (HCB), were measured in surface soils and sediments from Eastern Romania. Thirty-nine soil samples from the forested zone, eight soil samples from a municipal waste-disposal site, and 10 sediment samples from the Bahlui River along the Iassy city were analysed using accelerated solvent extraction (ASE) and gas chromatography coupled to electron capture detection or mass spectrometry. The low mean concentrations of OCPs (11–31 and 22–84?ng?g^?1 for HCHs and DDTs, respectively) and PCBs (8–43?ng?g^?1) in soil samples from the forested zone suggest that contamination at most of these sites occurred predominantly through atmospheric transport from zones where these compounds were used and subsequently through atmospheric deposition. Contrarily, soil samples collected in the vicinity of a waste-disposal site near Iassy contained higher mean levels of PCBs (278?ng?g^?1, range 34–1132?ng?g^?1) than OCPs (6 and 101?ng?g^?1 of soil for HCHs and DDTs, respectively). The sediment samples collected along the Bahlui river throughout the Iassy city revealed higher mean levels of PCBs (59?ng?g^?1, range 24–158?ng?g^?1) compared with OCP levels (2 and 37?ng?g^?1 of soil for HCHs and DDTs, respectively). Furthermore, PCB profiles and concentrations in the sediment samples varied considerably along the river due to a wide variety of sources, such as different industries and waste sites. Although their sources are difficult to evaluate, the presence of POPs at most sites (especially at the waste-disposal site) may constitute a potential health hazard.     

Tail Conditional Expectation for the Multivariate Pareto Distribution of the Second Kind: Another Approach

In risk analysis, the Tail Conditional Expectation (TCE) describes the expected amount of risk that can be experienced given that the risk exceeds a threshold value. Thus, TCE provides an important measure of the right-tail risk. In this paper, we present TCE formulas for the multivariate Pareto distribution of the second kind. Because of the complex form of this distribution, the formulas for the n-variate case are expressed recursively, in terms of the (n ? 1)-variate case.