Application of porphyrins in flow-injection analysis: A review

Porphyrins and metalloporphyrins fulfil a very important role in the metabolism of living organisms through biological pigments or biochromes and are therefore also employed in numerous applications in analytical chemistry. In flow-injection analysis the role of porphyrins and metalloporphyrins are centered as either that of analyte or that of a reagent or modifier in the determination of other species. This paper covers the attributes of porphyrin and metallophorphyrin complexes as enhancements in chemical analysis in flow-injection systems and points out the advantages and disadvantages in the implementation thereof.     

Parahydrogen studies of H2 addition to Ir(I) complexes containing chiral phosphine-thioether ligands: implications for catalysis

Ir(CO)[CpFe{eta5-C5H3(PPh2)CH2SR}]Cl [R = Ph and (t)Bu], containing a kappa2:P,S ligand, undergoes H2 addition across the S-Ir-CO axis under kinetic control to form two distinct diastereoisomeric products, which then rearrange via S dissociation in a process that can be hijacked for useful catalysis, but ultimately form a single diastereoisomer of the thermodynamic product where the hydride ligands are trans to chloride and phosphine.     

Low-temperature fluorination of fluoro-containing polymers: EPR studies of polyvinylidenefluoride and the copolymer of tetrafluoroethylene with ethylene

The direct fluorination of polyvinylidenefluoride (PVDF) and the copolymer of tetrafluoroethylene with ethylene (CTE) was studied at 35-300 K. The dependence of radical formation on temperature and reaction time was obtained by use of electron paramagnetic resonance (EPR) spectroscopy. Primary alkyl radicals formed as a result of the reaction of fluorine abstracting a hydrogen from the polymer were detected at 35 K. These radicals rapidly react with molecular oxygen producing long-lived (∼48 h at 300 K) peroxy radicals. The peroxy radicals when subjected to UV-irradiation (λ < 280 nm) give rise to other radicals that are not stable at T > 77 K. The concentration of the radicals produced during fluorination of PVDF at 77-200 K is one order of magnitude less than that formed from CTE under similar conditions. A mechanism based on the abstraction of the H and the energies of the C-H bonds is given. Density functional theory was used to predict the structures and EPR parameters for a number of fluorinated radicals to explain the observed spectra. The FOO radical was detected at low temperatures.     

Identification and structural characterisation of carboxy-terminal polypeptides and antibody epitopes of Alzheimer's amyloid precursor protein using high-resolution mass spectrometry

Alzheimer's disease (AD) is the most common cause for human age-related dementia, characterised by formation of diffuse plaques in brain that are directly involved in AD pathogenesis. The major component of AD plaques is beta-amyloid, a 40 to 42 amino acid polypeptide derived from the amyloid precursor protein (APP) by proteolytic degradation involving the specific proteases, beta-and gamma-secretase acting at the N- and C- terminal cleavage site, respectively. In this study we have prepared polypeptides comprising the carboxy-terminal and transmembrane sequences of APP, by bacterial expression and chemical synthesis, as substrates for studying the C-terminal processing of APP and its interaction with the gamma-secretase complex. Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR-MS) was used as a major tool for structure analysis. Immunisation of transgenic mouse models of AD with Abeta42 has been recently shown to be effective to inhibit and disaggregate Abeta-fibrils, and to reduce AD-related neuropathology and memory impairments. However, the mechanism underlying these therapeutic effects has been as yet unclear. Using proteolytic epitope excision from immune complexes in combination with FT-ICR-MS, we identified the epitope recognised by the therapeutically active antibody as the N-terminal Abeta(4-10) sequence; this soluble, nontoxic epitope opens new lead structures for AD vaccine development. A monoclonal antibody (Jonas; JmAb) directed against the cytosolic APP domain was used in studies of APP biochemistry and metabolism. Here we report the identification of the epitope recognised by the JmAb, using the combination of epitope excision and peptide mapping by FT-ICR-MS. The epitope was determined to be located at the C-terminal APP(740-747) sequence; it was confirmed by ELISA binding assays and authentic synthetic peptides and will be an efficient tool in the development of new specific vaccines. These results demonstrate high-resolution FT-ICR-MS as a powerful method for characterising biochemical pathways and molecular recognition structures of APP.     

Sequential injection spectrophotometric determination of iron as Fe(II) in multi-vitamin preparations using 1,10-phenanthroline as complexing agent

A sequential injection analysis (SIA) system is proposed for the determination of iron (II). Fe(II) was determined by SIA based on the reaction between 1,10-phenanthroline and iron (II), yielding an orange–red colour complex with absorption maximum at 512 nm. The method involved aspiration of 187 μl sample/standard zone followed by a zone of a reagent solution containing 140 μl of 7.8 × 10⁻⁴ mol l⁻¹ 1,10-phenanthroline into a carrier stream to be stacked inside a holding coil and flow reversed through a reaction coil to a detector. The optimum condition was evaluated and the calibration curve is linear over a range of 0.25 to 5.0 mg l⁻¹ of Fe(II) with detection limit of 18 μg l⁻¹. A sample throughput of 40 h⁻¹ was established. This technique is found to be simple, accurate, reproducible and sensitive. The proposed method was successfully applied for the determination of total iron as Fe(II) in pharmaceutical products (multi-vitamin tablets) and is especially useful for the determination of iron (II) in tablets with lower iron (II) contents. The results were found to be in good agreement with the results obtained by manual UV/Vis spectrophotometry and flame atomic absorption spectrometry (FAAS) and with claimed values by the manufacturers.     

Instabilities during the formation of electroactive polymer thin films

The solvent-induced film structure of poly(n-vinyl carbazole) (PVK) thin films on indium tin oxide (ITO)-coated glass was examined. PVK thin films were prepared via spin-coating using five different solvents. We investigated the relationship between the solvent characteristics and film properties, including surface roughness and structure, film thickness, and density. The spin-coated polymer thin films are not in thermodynamic equilibrium; rather, the film properties are affected by the dynamics of the spin-coating process. We found that water present in tetrahydrofuran (THF) induces dewetting of PVK films during the spin-coating process. Solvents with a high evaporation rate lead to high surface roughness due to Marangoni convection. The results show that the surface roughness and structure of the films are dominated by the dynamics of the film formation process, rather than thermodynamic interactions between the polymer and solvents.     

Development of New Efficient Adsorbent by Functionalization of Mg3Al-LDH with Methyl Trialkyl Ammonium Chloride Ionic Liquid

The present paper describes a new way of obtaining an efficient adsorbent material by functionalization of Mg₃Al layered double hydroxides (LDH) with methyl trialkyl ammonium chloride-ionic liquid (IL) using two methods: ultrasound and cosynthesis. Layered double hydroxides are good solid support for the functionalization with ionic liquids due to their well-ordered structure. The immobilization of the ILs in suitable solid supports combine the advantages of the ILs with the properties of the solid supports bringing more benefits such as use of lower quantity of ILs and avoiding of ILs loss in the aqua phase which overall decrease the treatment costs. In case of ultrasound method of functionalization is assured a uniform distribution of IL on the solid surface, but through immobilization by cosynthesis due to the tunable properties of LDH, is assured an intercalation of the ILs between the LDH layers. This fact was highlighted by the X-ray diffraction (RXD), scanning electron microscopy (SEM) analyses and Fourier-transform infrared (FTIR) spectroscopy of the obtained adsorbent. The added value brought by the functionalization of Mg₃Al with the studied IL was underlined by the adsorption studies conducted in the treatment process of water with diclofenac content. Kinetic, thermodynamic, and equilibrium studies were performed. DCF adsorption onto the studied materials correspond to a chemisorption, the pseudo-second-order kinetic model describing the most accurately the experimental data. DCF adsorption onto the studied materials occurs as a heterogeneous process, with the experimental data fitting best with the SIPS isotherm. The sample obtained through cosynthesis developed a maximum adsorption capacity of 648 mg/g.     

Model Systems for Evidencing the Mediator Role of Riboflavin in the UVA Cross-Linking Treatment of Keratoconus

Riboflavin under UVA radiation generates reactive oxygen species (ROS) that can induce various changes in biological systems. Under controlled conditions, these processes can be used in some treatments for ocular or dermal diseases. For instance, corneal cross-linking (CXL) treatment of keratoconus involves UVA irradiation combined with riboflavin aiming to induce the formation of new collagen fibrils in cornea. To reduce the damaging effect of ROS formed in the presence of riboflavin and UVA, the CXL treatment is performed with the addition of polysaccharides (dextran). Hyaluronic acid is a polysaccharide that can be found in the aqueous layer of the tear film. In many cases, keratoconus patients also present dry eye syndrome that can be reduced by the application of topical solutions containing hyaluronic acid. This study presents physico-chemical evidence on the effect of riboflavin on collagen fibril formation revealed by the following methods: differential scanning microcalorimetry, rheology, and STEM images. The collagen used was extracted from calf skin that contains type I collagen similar to that found in the eye. Spin trapping experiments on collagen/hyaluronic acid/riboflavin solutions evidenced the formation of ROS species by electron paramagnetic resonance measurements.